Front Axle Coil Bracket Replacement for Jeep Wrangler TJ/LJ, XJ & ZJ
Warranty Information
Vendor warranty summary
Artec Industries Warranty
At a glance: Limited lifetime warranty against defects in material or workmanship
This is Artec Industries's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Artec Industries products | Limited lifetime, starting on delivery date |
| Returns of powder-coated products | Not returnable (manufacturer refund policy) |
What's covered
- Defects in material or workmanship for products bought, installed and used for their intended purpose
- Artec repairs or replaces a defective product at no charge (method at Artec's discretion)
What's not covered
- Misuse, abuse or neglect
- Improper installation
- Incorrect maintenance
How to make a Artec Industries warranty claim
- Call Artec at 855-278-3299 (Mon-Fri 9am-5pm MDT) to describe the issue
- Get an RMA number before shipping anything; packages without one are refused
Artec Industries contact: Phone: 855-278-3299 · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Artec Industries, and help it along either way.
Shop Artec Industries at NVMOS
Under Tailgate Plate - Aluminum, for Jeep Wrangler TJ/LJ 1997-2006
Coil Correction Plate for Jeep TJ Front Coil Springs (Pair)
Front and Rear Truss Package for Jeep Gladiator JT 2020+ (Free Front Axle Skid)
See all Artec Industries products, lead times and FAQs →
Disclaimer: The information on this page describes Artec Industries's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Artec Industries official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Artec Industries builds axle trusses, swap kits, suspension brackets and armor in North Salt Lake, Utah. NVMOS carries Artec reinforcements, control arms, skids, bumpers, fenders and battery mounts for Jeep, Toyota and Super Duty axles. It's for rigs running big tires and lockers that need housings and brackets that stay straight.
Based in: North Salt Lake, Utah · Made in: USA — most parts built in-house in Utah · Founded: 2003 · Lead time: Artec in-stock orders: 2–4 business days; NVMOS stock: 24–48 hours
Shop all 472 Artec IndustriesWarrantyAll brands
Warranty terms are set by Artec Industries, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
Bent and rust-thinned front axle brackets are why so many older Jeeps steer vaguely and eat track bar bushings. This Artec Coil Bracket Replacement retires the factory front axle brackets on the Dana 30 under the Wrangler TJ/LJ, Cherokee XJ, and Grand Cherokee ZJ — and the Rubicon Dana 44 in the TJ/LJ — with one CNC-formed weld-on assembly. It combines the coil bucket, shock mount, track bar bracket, anti-sway bar mount, and steering stabilizer mount in a single piece of 3/16" steel that is 50% thicker than the stamped originals, and it holds the exact factory bracket width so your truss, gussets, and bolt-on brackets still fit.
Features
- 3/16" mild steel — 50% thicker than the factory brackets
- One assembly replaces the coil bucket, shock, track bar, sway bar, and stabilizer mounts
- Matches the exact factory bracket width, so trusses and gussets need no modification
- Tabbed-and-slotted pieces self-locate for accurate assembly before welding
- CNC-cut and CNC-bent flanges for clean, repeatable fit-up
- Fits the Dana 30 in TJ, LJ, XJ, and ZJ, plus the Rubicon Dana 44 in TJ and LJ
- Optional LCA brackets with a CAM slot or standard 9/16" hole; sold as a pair
Pick your variant: brackets alone, or with lower control arm brackets in CAM-slot or 9/16"-hole style. Everything is weld-on, so budget for competent welding and paint over the bare steel. It plays well with the front axle truss for TJ/LJ/ZJ, and the TJ front axle UCA replacement finishes the upper mounts. More spring-seat hardware lives in the coil springs collection.
Complete your Jeep Wrangler build
More parts that fit your Jeep Wrangler and pair well with this one — matched and ready to install.
$214.49
$100.00
$406.99
$69.99
$899.99
More for your Jeep Wrangler
Picked from the 1751 parts we carry for the Jeep Wrangler. Check the years and trim in each title — or call us and we’ll confirm fit.
Front Axle Coil Bracket Replacement for Jeep Wrangler TJ/LJ, XJ & ZJ FAQs
Which axles and Jeeps does this coil bracket fit?
It fits the Dana 30 in the Wrangler TJ/LJ, Cherokee XJ and Grand Cherokee ZJ, plus the Rubicon Dana 44 in the TJ and LJ.
How is it installed?
It is weld-on, so plan for competent welding and paint over the bare steel.
What does one assembly replace?
It combines the coil bucket, shock mount, track bar bracket, anti-sway bar mount and steering stabilizer mount in a single piece.
What is it made of?
It is CNC-formed 3/16 inch mild steel, 50% thicker than the factory brackets. It matches the factory bracket width, so trusses and gussets need no modification.
What variants are available?
You can get the brackets alone, or with lower control arm brackets in a CAM-slot or 9/16 inch hole style, sold as a pair.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
