AJT Design Injection Fob IF032 Key Fob Case for Ford 3-Button Fobs - Blue
Warranty Information
Vendor warranty summary
AJT Design Warranty
At a glance: 1-year limited warranty (per retailer listings; AJT publishes no detailed terms)
This is AJT Design's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| AJT Design interior accessories (per retailer listings) | 1 year (limited) |
What's covered
- Defects in AJT Design products for one year (retailer-stated; no detailed terms published)
What's not covered
- No exclusions published by the manufacturer
How to make a AJT Design warranty claim
- Contact the retailer you bought from (NVMOS) with your order number and photos of the issue
- Retailer coordinates with AJT Design for replacement
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to AJT Design, and help it along either way.
Shop AJT Design at NVMOS
See all AJT Design products, lead times and FAQs →
Disclaimer: The information on this page describes AJT Design's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: AJT Design official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
AJT Design is a Traverse City, Michigan shop that makes small, model-specific interior upgrades, mostly for Toyotas. NVMOS carries AJT knobs, Injection Fob key cases, cup holders, trim rings, console liners and overlays for the Tacoma, Tundra, 4Runner and more. Built for owners who notice the details every time they climb in.
Based in: Traverse City, Michigan · Founded: 2014 · Made in: USA where possible · Lead time: In-stock items ship in 24–48 hours
Shop all 850 AJT DesignWarrantyAll brands
Warranty terms are set by AJT Design, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
The AJT Design Injection Fob IF032 is a replacement two-piece case for a 3-button Ford key fob, shown here in Blue. It is injection molded from PC-ABS, a high-strength, impact-resistant plastic, and it takes the place of the case that came with the vehicle. Instead of the snap-together shell most factory fobs use, it bolts closed with socket head cap screws. That makes for a sturdier, more straightforward build, and it can be opened again later with the same allen key. It is made in the USA.
Fitment
AJT lists this case for various Ford, Lincoln, Mercury and Mazda applications. The vendor text does not publish a year or model list. It points buyers to a compatibility photo and an instruction video instead, so compare your fob to those before ordering. The case is compatible with OEM fobs only, which means aftermarket remotes are not covered.
What's included
The case and a 7/64 inch allen key, with the screws in the finish you select at checkout. Your fob's buttons and gasket, electronics and battery are reused and are not included. They move over from your existing case into the new one.
Install notes
Assembly takes the 7/64 inch allen key that ships with the case. Do not use threadlocker such as Loctite on this product.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text Carl & Anton at (920) 249-7744 or use the chat — real humans in Sheboygan, Wisconsin, not a call center.
Specifications
AJT Design Injection Fob IF032 Key Fob Case for Ford 3-Button Fobs FAQs
Which vehicles does this fob case fit?
The vendor lists various Ford, Lincoln, Mercury and Mazda applications and does not give a model or year list. Check the compatibility photo and instruction video and match your fob's shape and button layout. It is compatible with OEM fobs only.
What is included with the case?
The case, the screws in the finish you choose, and a 7/64 inch allen key. Buttons, gasket, electronics and battery are not included because they are reused from your existing fob.
Can I use Loctite on the screws?
No. The vendor says not to use threadlocker such as Loctite on this product.
How does it close up?
It bolts together with socket head cap screws instead of an annular snap fit, using the included allen key.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
