ORACLE Lighting Skid Plate with Integrated LED Emitters for Jeep Wrangler JL and Gladiator JT
The ORACLE Lighting Skid Plate with Integrated LED Emitters is a two-in-one upgrade for the Jeep Wrangler JL and Gladiator JT, combining heavy-duty underbody protection for the sway bar and steering box with a high-output forward lighting array. A 3/16 in. steel plate carries nine 15W LED modules that push 9,000 lumens of focused trail light, all in a no-drill, bolt-on package.
Key Features
- 3/16 in. steel plate with satin black powdercoat for rugged underbody protection
- 9x high-output 15W LED modules — 135W total, 9,000 lumens
- Precision 30-degree beam optics for focused forward and trail illumination
- IP68 rated — fully sealed against dust and water immersion
- DOT, SAE & E9 marked for international lighting compliance
- Individually replaceable modules — swap a single emitter, not the whole unit
- No-drill installation with all mounting hardware included
- Switched relay wiring harness — dedicated on/off switch or factory AUX switch compatible
Fitment & Compatibility
Fits 2018-2025 Jeep Wrangler JL (all trims) and 2020-2025 Jeep Gladiator JT (all trims). Gladiator JT Mojave models require shock reservoir relocation. Designed for the factory-style Jeep bumper; fitment with aftermarket winch or bumper configurations is not guaranteed.
Specifications
| Specification | Detail |
|---|---|
| ORACLE Part # | 5883-001 (White), 5883-005 (Amber), 5883-006 (Yellow) |
| LED Modules | 9x high-output 15W (135W total) |
| Total Lumens | 9,000 lm |
| Power Draw | 6A @ 12V DC |
| Beam Width | 30 degrees |
| IP Rating | IP68 |
| Compliance | DOT, SAE & E9 Marked |
| Plate Material | 3/16 in. steel, satin black powdercoat |
| Emitter Colors | White, Amber, Yellow |
| Warranty | 1 Year |
What's in the Box
- Skid plate lighting system
- Switched relay wiring harness with on/off switch
- Mounting hardware
Frequently Asked Questions
Does this fit my Jeep?
It fits all trims of the 2018-2025 Wrangler JL and 2020-2025 Gladiator JT. Gladiator Mojave models require relocating the shock reservoir, and aftermarket winch or bumper setups are not guaranteed to clear the plate.
Do I need to drill to install it?
No. Installation is a no-drill process and all mounting hardware is included. The switched relay harness connects to the included on/off switch or directly to the factory AUX switch panel on equipped Jeeps.
What if one LED module fails?
Each of the nine 15W modules is individually replaceable, so a single emitter can be swapped without replacing the entire skid plate assembly.
Is it weatherproof?
Yes. The LED modules are IP68 rated for full protection against dust and water immersion, and the plate wears a satin black powdercoat over 3/16 in. steel.
Are the lights street legal?
The emitters are DOT, SAE, and E9 marked. Auxiliary trail lighting use is subject to your state and local road laws, so verify local regulations before on-road use.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now and pay later with Affirm.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
