The AeroBox™ is EcoOlogical's rotomolded LLDPE cargo box that mounts at the rear of a full-size truck bed, right against the tailgate. Instead of a crossbed toolbox that eats the front of your bed, the AeroBox™ puts roughly 11 cu ft of lockable, weather-sealed storage where you can actually reach it — drop the tailgate and the door is at arm's length. The rear-mount position is also designed to reduce tailgate drag, and the whole box is made in the USA. Choose Standard Assembly (box plus through-floor hardware kit with quick-disconnect fasteners) or Premium Assembly, which adds the patented Dock-n-Lock striker and latch mounts, two interior divider panels, and three tie-down hooks.
Features
- Seamless rotomolded LLDPE construction — never rusts, peels, or dents like metal boxes
- Roughly 11 cu ft of storage in a 58" x 19" x 17" footprint, about 50 lbs assembled
- Removable door with two hook-cam locks and a bulb seal to keep out dust and weather
- Door sits against the closed tailgate, so a locked tailgate blocks access entirely
- Removable load floor with concealed storage underneath for small items
- Integrated handle and wheels — unfasten it, lift it out, and roll it away
- Recessed exterior features help secure bicycles, ladders, and pipes against the box
- Works with most tonneau covers and truck caps; black grained finish, made in the USA
Fitment is by measurement, not by model: the AeroBox™ fits full-size trucks (F-150/F-250, Silverado, Sierra, Ram, Tundra and similar) with an unobstructed tailgate opening of at least 58.5" and at least 19.5" of clearance below the bed floor for the fasteners — Premium's side-mount Dock-n-Lock brackets also need 62" of inner bed width for the first 17" ahead of the rear post. It is not for compact or midsize beds, step-sides, or beds with bulky drop-in liners or bed extenders. Sealing the rest of the bed? Add the GapShield™ Tailgate Gap Cover, and browse the full EcoOlogical lineup and our other exterior storage solutions.
AeroBox™ Aerodynamic Rear-Mount Truck Bed Cargo Box FAQs
Will the AeroBox™ fit my truck?
It fits full-size pickups — F-150/F-250, Silverado, Sierra, Ram, Tundra and similar — regardless of model year. Measure before ordering: you need an unobstructed tailgate opening of at least 58.5" and at least 19.5" of clearance below the bed floor, and the Premium Assembly's side brackets need 62" of inner bed width for the first 17" ahead of the rear post. It does not fit compact or midsize trucks, step-side beds, or beds with bed extenders or bulky drop-in liners.
Does the AeroBox™ work with a tonneau cover or truck cap?
Yes, it works with most tonneau covers and truck caps because it sits low at the rear of the bed. Before ordering, check that your cover's rails, clamps, or other hardware don't obstruct the mounting area at the rear of the bed. With a cover closed over it, your gear gets another layer of weather protection and concealment.
How does the AeroBox™ install, and can I remove it?
Standard Assembly bolts through the bed floor with 1/4-turn quick-disconnect fasteners, which requires some drilling — plan on about 1.5 hours with careful measuring. Premium Assembly uses the patented Dock-n-Lock striker and latch system instead. Either way the box stays removable: release the fasteners or latches, lift it out, and roll it on its integrated wheels and handle.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now and pay later with Affirm.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
