ORACLE Lighting 2016-2019 Toyota Tacoma H11 - 4,000+ Lumen Conversion Kit (High Beam)
This ORACLE 4,000+ Lumen LED kit is a drop-in H11 upgrade for the 2016-2019 Toyota Tacoma, casting a 4,000-6,000 lumen blanket of crisp 6000K light for far better nighttime visibility. It is built around Philips Luxeon ZES chips with Samsung-designed drivers and pulls less than half the power of a factory halogen bulb. There is no relay harness to wire and no flickering, with CAN-bus compatibility on most vehicles, so the entire install takes under 30 minutes.
Key Features
- 4,000-6,000 lumens per set of 6000K bright white output
- Philips Luxeon ZES chips for high output and excellent heat dissipation
- Samsung-designed internal drivers in a compact package
- Adjustable, removable heat sink for reverse or external mounting
- CAN-bus compatible with no error codes on most vehicles
- No relay harness required for a direct plug-and-play install
- Self-regulated cooling with no cooling fan to fail
- Draws under half the power of factory halogen bulbs
- Roughly 30-minute DIY installation with no special tools
Fitment & Compatibility
Fits the 2016-2019 Toyota Tacoma in the H11 high beam position. This is a universal H11 bulb, so it also works in any vehicle using H11 high beam sockets. Note that H11 and 9145 share the same socket and are interchangeable. Verify your factory bulb size before ordering.
Specifications
| Specification | Detail |
|---|---|
| ORACLE Part # | 5235-001 |
| Bulb Type | H11 |
| Minimum Output | 4,000+ lumens per set |
| Maximum Output | 6,000 lumens per set |
| Color Temperature | 6000K (Bright White) |
| LED Chip | Philips Luxeon ZES |
| Driver | Samsung-designed internal driver |
| CAN-Bus | Compatible (decoder may be needed on select vehicles) |
| Relay Harness | Not required |
| Cooling | Self-regulated (adjustable/removable heat sink) |
| Install Time | ~30 minutes |
| Warranty | 2 Years |
What’s in the Box
- (2) ORACLE H11 4,000+ Lumen LED Bulbs
- (2) H11 Connectors
- (2) H11 Compact LED Drivers
Frequently Asked Questions
Will this kit fit my 2016-2019 Toyota Tacoma?
Yes. It is a direct H11 replacement for the high beam position on the 2016-2019 Toyota Tacoma, and H11 and 9145 share the same socket and are interchangeable. Confirm your factory bulb size before ordering.
How long does installation take?
About 30 minutes. There is no relay harness to wire, and the adjustable heat sink can be reverse-installed or mounted outside the headlight back-cap to clear tight housings.
How bright is it?
A minimum of 4,000 lumens and up to 6,000 lumens per set at 6000K, powered by Philips Luxeon ZES chips for a crisp bright-white beam.
Will it throw CAN-Bus error codes?
It is CAN-bus compatible on most vehicles. Some Dodge, Chrysler, Jeep, and newer European models may require an additional CAN-Bus decoder harness if flashing or shutoff occurs with the engine on.
What warranty is included?
These bulbs are backed by a 2-year warranty.
Multi-column

Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!

Financing Available
Buy now and pay later with Affirm.

Contact Us
Have a question? Just send us an e-mail at support@nvmos.com




















