INEOS Grenadier Front Bumper Light Kit (Mount + 32" LED Light Bar)

The Front Bumper Light Kit pairs our steel bumper light mount with a 32-inch Osram-chip LED bar to drop a wide, single-row wash of forward light straight into the INEOS Grenadier's factory bumper opening. It is a true bolt-on that uses existing mounting points, so you gain roughly 8,800 lumens of trail and highway reach without cutting the bumper, drilling plastics, or giving up any approach angle. Everything needed to wire it into the Grenadier's power system ships in the box.

Key Features

• Complete kit: high-grade steel bumper mount plus a 32" single-row Osram-chip LED light bar, matched and pre-aligned for the Grenadier
• ~8,800 combined lumens at roughly 90W total system draw for confident night driving and poor-weather visibility
• True 100% bolt-on install using factory mounting points — no cutting, no drilling, no trimming of the bumper, grille, or plastics
• Mount finished in textured black powder coat over high-grade steel; hardware is stainless steel
• Weatherproof Deutsch DTP connector with two wiring harnesses included — one for a centralized lighting controller, one for factory under-hood auxiliary power (EXT1 or EXT5)
• Preserves radiator airflow, factory crash-bar integrity, and full approach angle — no ground-clearance penalty

Fitment & Compatibility

Fits the INEOS Grenadier (2023–present). Choose U.S. Fit for the U.S.-spec bumper (amber marker lights, wider center opening) or Euro Fit for the Europe-spec bumper with the narrower center slot. Important: this kit is not compatible with the EURO bumper that has an integrated winch. It is otherwise usable with or without a front winch.

Specifications

What's in the Box

• Front bumper light bar mount (steel bracket system)
• 32" Osram-chip LED bumper bar assembly
• Vehicle-specific mounting brackets
• Wiring harness for centralized lighting controller connection
• Wiring harness for factory under-hood auxiliary power (EXT1/EXT5)
• Stainless steel mounting hardware and complete install hardware

Frequently Asked Questions

Do I need to cut or drill my bumper to install this kit?
No. The mount uses existing factory mounting points for a 100% bolt-on install with no cutting, drilling, or trimming of the bumper, grille, or plastics. Most installs take 45–60 minutes with basic hand tools.

How is this different from the 2-light and 3-light kits?
This kit uses a single 32" continuous Osram bar for a clean, low-profile face and ~8,800 lumens. The multi-pod versions use Cree 4-chip units instead — step up to our Mount + 3-Light LED Bar kit if you want ~13,200 lumens, or see the Mount + 2-Light LED Bar kit for a compact two-pod look.

Will it affect my approach angle or radiator airflow?
No. The bar sits inside the factory bumper opening, so you keep full approach angle, ground clearance, factory crash-bar integrity, and radiator airflow.

How does it get power?
Two harnesses are included: one connects to a centralized lighting controller, and one taps factory under-hood auxiliary power at EXT1 or EXT5. The bar terminates in a weatherproof Deutsch DTP connector.

Can I buy just the mount?
Yes. The mount is sold on its own as our Front Bumper Light Mount, and the bar is available separately as the 32" LED Light Bar.