Artec Hardcore Diff Cover for Jeep Wrangler JL & Gladiator JT M210-D44 Front
The Artec Hardcore Diff Cover for the M210 front axle bolts thick nodular-iron armor over the factory Dana 44 (M210) under the Jeep Wrangler JL (2018+) and Gladiator JT (2020+). On a rig running 35s and up, the front pumpkin takes constant abuse on ledges and off-camber rock, and the factory stamped cover is the weak point. Modeled from 3D scan data of the M210 housing, this cover fits precisely, seals cleanly, and keeps the ring, pinion, and front locker protected.
Features
- High-strength nodular-iron casting built for extreme off-road conditions
- Thick walls shield the M210 ring gear and carrier from rock strikes
- Modeled from 3D scan files of the factory axle for precise fitment
- Magnetic fill plug captures metal debris for cleaner gear oil
- Powder-coat finish over the casting
- High-strength steel fasteners install with 5/16" and 3/8" Allen keys, torqued to 20-30 ft-lbs in a star sequence
- Made in the USA with a 1-year warranty against manufacturer defects
This is the front cover only — pair it with the M220-D44 rear cover for front-and-rear coverage. Non-Rubicon JLs with the M186 front take the M186-D30 cover instead, so confirm your axle before ordering. Seal with RTV or a Lube Locker gasket (not included), and find the rest of the range in our diff covers collection for the Jeep Wrangler.
Complete your Jeep Gladiator build
More parts that fit your Jeep Gladiator and pair well with this one — matched and ready to install.
$210.99
$93.49
$99.99
$560.97
$54.00
More for your Jeep Gladiator
Pulled from the 614 products that fit your Jeep Gladiator — so every item here is guaranteed to fit. No sorting through parts that don’t.
Specifications
Artec Hardcore Diff Cover for Jeep Wrangler JL & Gladiator JT M210-D44 Front FAQs
Does this fit the Gladiator as well as the Wrangler JL?
Yes. It fits the Dana 44 / M210 (210mm) front axle used in both the Jeep Wrangler JL from 2018 and the Gladiator JT from 2020. If your JL is a non-Rubicon with the lighter M186 Dana 30 front, use Artec's M186-D30 cover instead — the axle tag confirms which one you have.
Will it clear an aftermarket selectable locker like an ARB?
The casting is shaped from 3D scans of the factory housing and designed around the stock M210 carrier, so it holds close tolerances by design. If you run an aftermarket selectable locker, confirm clearance for your specific carrier before installation.
What hardware and torque does the install use?
The included high-strength steel fasteners install with 5/16" and 3/8" Allen keys, torqued to 20-30 ft-lbs in a star sequence. Seal the machined flange with RTV or a Lube Locker gasket — not included — then refill through the magnetic fill plug. No welding is needed.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now and pay later with Affirm.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
