The Odyssey PC1500 battery mount holds your Group 34/78-equivalent PC1500 racing battery locked down in the roughest environment you can find. Artec CNC-cuts it as one piece from 10-gauge cold-roll steel and folds it into shape, so there are no welds to fatigue and crack, and the battery sits snug with no movement to shorten its life.
Key Features
- One-piece design, CNC-cut and formed for lighter weight and added strength
- No welds to fatigue and crack over time, unlike fabricated box designs
- CNC cut from 10GA (.130") cold-roll steel plate
- Sized for the Odyssey PC1500 (Group 34 and 78 equivalent) racing battery
- Battery fits snug to eliminate movement that causes premature wear
- Six 1/4" bolts with nylock nuts included to secure the battery
- Mounts via four 1/4" countersunk holes in the base, or weld directly in place
Fitment & Compatibility
Universal mount. This is a battery-specific tray designed to hold the listed battery securely in a custom or relocated install (engine bay, cargo area, or dual-battery setup); it is not tied to one vehicle chassis, though some fabrication or adaptation may be required to place it in your rig. Confirm your battery matches the group/model this mount is cut for before ordering.
Specifications
| Specification | Detail |
|---|---|
| Material | Cold-roll steel |
| Thickness | 10 gauge (.130") |
| Construction | One-piece, CNC-cut, no welds |
| Fits battery | Odyssey PC1500 (Group 34/78 equivalent) |
| Finish | Bare steel (coating required to prevent rust) |
| Battery hardware | 6 x 1/4" bolts w/ nylock nuts (included) |
| Mounting | 4 x 1/4" countersunk holes, or direct weld |
| SKU | OY1501 |
What's in the Box
- One Odyssey PC1500 battery mount (bare 10GA steel)
- Six 1/4" bolts with nylock nuts for the battery hold-down
Frequently Asked Questions
Which battery does this fit?
It is cut specifically for the Odyssey PC1500, which is a Group 34/78 equivalent racing battery. It will not correctly fit other Odyssey sizes.
Do I have to weld it in?
No. There are four 1/4" countersunk holes in the base so you can bolt it down, or you can weld it directly if you prefer a permanent mount.
Does it come coated?
No. It ships in bare steel and must be painted or powder coated to prevent rust before use.
Is battery hold-down hardware included?
Yes. Six 1/4" bolts with nylock nuts are included to clamp the battery. Base-mount bolts to your rig are not included.
What if I need a different Odyssey size or floor hardware?
Artec offers matching mounts for other Odyssey sizes, including the Odyssey PC1200 mount. To bolt this tray to your rig, pair it with the 4-bolt battery mounting kit.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now and pay later with Affirm.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
