Superduty Crossover Steering Kit with 7-8" JMX rod ends

This crossover steering kit is built to convert a Ford Super Duty Dana 60 swap over to a stronger crossover (high-steer) layout. It supplies the JMX 7/8" rod ends, tube adapters, jam nuts, misalignment spacers, and heavy 1.5" DOM tubing needed to build a tie rod and drag link that stand up to big tires and hard steering loads. It is designed as the companion to Artec's Super Duty crossover weld-on high steer arms.

Key Features

• JMX 7/8" rod ends for the drag link and tie rod (7/8" bore, with 7/8"-to-3/4" high-misalignment spacers)
• 7/8"-14 tpi wrench-flat tube adapters and matching jam nuts for 1.5" OD .250" wall tubing
• 1.5" OD .250" wall 1026 DOM tubing: 48" length for the drag link and 54" for the tie rod
• Builds an uncut drag link up to about 54" and a tie rod up to about 59" total
• Made in the USA

Fitment & Compatibility

Made specifically to work with Artec's Super Duty Crossover Weld-On High Steer Arms and Super Duty Dana 60 axle-swap kits. It is a build kit, not a bolt-on: assembly requires cutting the DOM tubing to length, drilling the pitman arm to 3/4", and welding the tube adapters. Set toe-in to roughly 1/16"-1/8" after assembly.

Specifications

What's in the Box

• 7/8" JMX rod ends (drag link and tie rod)
• 7/8"-14 tpi wrench-flat tube adapters and jam nuts
• 7/8"-to-3/4" high-misalignment spacers
• 1.5" OD .250" wall 1026 DOM tubing (48" drag link, 54" tie rod)

Frequently Asked Questions

What high-steer arms does this kit work with?
It is built for Artec's Super Duty crossover weld-on high steer arms and Super Duty Dana 60 swap kits.

Is any fabrication required?
Yes. You cut the DOM tubing to length, drill the pitman arm to 3/4", and weld the tube adapters. Basic cutting, drilling, and welding skills are needed.

How long can the links be built?
The supplied tubing yields a drag link up to about 54" and a tie rod up to about 59" total before trimming to fit.

What tubing does it use?
1.5" OD .250" wall 1026 DOM, matched to the 7/8"-14 tpi tube adapters.

Building the axle first? Pair it with our Crossover Weld-On High Steer Arms - 05+ SuperDuty or the Superduty Swap Aluminum Steering Kit.