The Artec Industries Shock + Lower Link Axle Combo Brackets pair a lower link mount with an over-the-joint shock tab in one kit for the driver and passenger sides. It is the answer when the axle is crowded and there is no clean spot for the shock: mount it directly over the lower link joint, offset from the tube centerline, using Artec's standard link bracket rather than a bulky purpose-built tower. Choose the LCA bracket angle that matches your suspension.
Key Features
- Combines the lower link axle bracket and the shock tab for both sides in one kit
- Shock mounts over the lower link joint, offset from the axle-tube centerline
- Available in 0, 10, or 22-degree angled lower axle link brackets
- Accepts any shock mounting width from 1.25" to 1.6" - air shocks, coilovers, or ORI struts
- 2.625" link mounting width with a 9/16" bolt hole for common cartridge joints (Johnny, Flex, Ballistic)
- Link hole drillable for 1.25" rod ends with spacers
- Made from 1/4" boxed steel plate for strength and impact resistance
Fitment & Compatibility
Universal fabrication brackets for link-suspension builds, not vehicle-specific. Select the 0-degree (SKU BR1086), 10-degree (BR1087), or 22-degree (BR1088) lower link bracket angle to suit your geometry. The 2.625" link width and 9/16" hole accept common cartridge joints, and the shock tab fits any 1.25"-1.6" shock. Ideal for coilover, air-shock, or ORI conversions where axle-tube space is limited.
Specifications
| Specification | Detail |
|---|---|
| Material | 1/4" boxed steel plate |
| Link mounting width | 2.625" |
| Bolt hole | 9/16" (drillable for 1.25" rod ends) |
| Shock mounting width | 1.25" - 1.6" |
| Angle options | 0, 10, or 22 degrees |
| Quantity | Pair (driver & passenger) |
What's in the Box
- Driver and passenger lower link axle brackets
- Matching shock tabs
Frequently Asked Questions
Which angle should I choose?
Pick the 0, 10, or 22-degree lower link bracket that matches your desired link geometry. All three share the same 2.625" mounting width and 9/16" hole.
What is the difference between this and the separate tabs?
This kit includes both the lower link axle brackets and the shock tabs. If you already run Artec link brackets, the Lower Link Shock Tabs add just the shock tabs.
What joints and shocks fit?
Common cartridge joints (Johnny, Flex, Ballistic) at 2.625" width, drillable to 1.25" rod ends; shocks from 1.25" to 1.6" including air shocks, coilovers, and ORI struts.
Do these weld on?
Yes. They are weld-on axle brackets and should be positioned and welded as part of a link-suspension build.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now and pay later with Affirm.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
