Easy 3 Link - Kit I - Dual Bracket for Artec Truss

The Artec Industries Easy 3 Link - Kit I is the simplest way to gather the hardware for a 3-link front or rear suspension built around Artec's Dual 3-Link Bracket and an Artec axle truss. Instead of sourcing rod ends, adapters, jam nuts and spacers piece by piece, this kit bundles the correct sizes so you can cut, weld and assemble your links and panhard in one go.

Key Features

• Matched hardware set built around the Artec Dual 3-Link Bracket with a panhard bar location
• Heavy 1.25"-12tpi x 1.0" bore rod ends for the three suspension links
• Dedicated 7/8"-14tpi x 3/4" bore rod ends sized for the panhard (track bar)
• Correct tube adapters and jam nuts included for every rod end
• High-misalignment spacers included so the joints articulate without binding
• Available with or without DOM tubing so you can supply your own or have it cut to length

Fitment & Compatibility

Designed to work with Artec axle trusses and the Artec Dual 3-Link Bracket to build a 3-link (three links plus a panhard). It is a hardware and link kit rather than a vehicle-specific bolt-on, so it suits custom Jeep and buggy builds running an Artec-trussed axle. Choose the "No Tubing" option if you already have your own DOM link material, or the tubing option to have it included. If you prefer an adjustable upper link instead of the dual-bracket layout, see the Easy 3 Link Kit F.

Specifications

What's in the Box

• 1 RH and 1 LH 7/8"-14tpi x 3/4" bore panhard rod ends
• 1 RH and 1 LH 7/8"-14tpi panhard tube adapters
• 1 RH and 1 LH 7/8"-14tpi panhard jam nuts
• 4 x 3/4"-9/16" high-misalignment spacers
• 3 RH and 3 LH 1.25"-12tpi x 1.0" bore link rod ends
• 3 RH and 3 LH 1.25"-12tpi link tube adapters
• DOM tubing if the tubing option is selected

Frequently Asked Questions

What does this kit build?
It supplies the rod ends, adapters, jam nuts and misalignment spacers to build a three-link suspension plus a panhard (track bar) using the Artec Dual 3-Link Bracket and an Artec truss.

Does it come with the link tubing?
Only if you select the tubing option. Choose "No Tubing" to run your own DOM, or "Yes" to have tubing included.

Do I need an Artec truss and bracket to use it?
Yes. The kit is designed around the Artec Dual 3-Link Bracket and an Artec axle truss, which provide the mounting points the rod ends thread into.

Is welding required?
Yes. The tube adapters are welded into your link tubing and the brackets are welded to the axle, so this is a fabrication-oriented kit.