The Artec Industries Adjustable Panhard Mount for Axle is the axle-side track-bar mount for a custom link-suspension build. It provides adjustable mounting positions so you can locate the panhard (track) bar for the cleanest geometry and best clearance around hydraulic rams, coilovers, and the differential. Its style and strength are designed to match the Artec truss it mounts alongside.
Key Features
- Adjustable panhard-bar mounting for dialing in track-bar angle and axle-side location
- Designed to provide clearance for aftermarket components such as hydraulic steering rams and coilovers
- Works with any 3-link or 4-link suspension setup that uses a panhard bar
- Built to match the style and strength of the Artec truss it fits
- Weld-on construction for a permanent, high-strength mount
Fitment & Compatibility
A universal, weld-on axle-side panhard (track-bar) mount for custom 3-link and 4-link builds. It is intended to be used alongside an Artec axle truss. Choose the variant that fits your layout: Offset to leading edge, or Centered on tube. For the frame side of the same track bar, pair it with the matching frame mount.
Specifications
| Specification | Detail |
|---|---|
| Type | Axle-side panhard / track-bar mount |
| Adjustment | Adjustable bar location |
| Position options | Offset to leading edge, or Centered on tube |
| Compatibility | Any 3-link or 4-link with a panhard bar |
| Installation | Weld-on |
What's in the Box
- One axle-side Adjustable Panhard Mount in the selected configuration
Frequently Asked Questions
What is a panhard mount for?
A panhard (track) bar locates the axle side-to-side under the vehicle. This mount is the axle-side anchor for that bar, and its adjustability lets you set the bar angle so the axle stays centered through the suspension's travel.
What is the difference between the two variants?
"Centered on tube" places the mount over the axle tube, while "Offset to leading edge" shifts it forward to clear other components or achieve a particular bar geometry. Choose based on your ram, coilover, and link clearances.
Do I weld it on?
Yes. It is a weld-on mount designed to sit alongside an Artec truss and match its strength. Weld it fully once you have set your track-bar geometry.
What mounts the other end of the bar?
The frame end needs its own bracket. Pair this with the Artec Adjustable Frame Panhard Mount for the frame-side connection.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now and pay later with Affirm.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
