Tube Link Mount Large (single)

The Artec Industries Tube Link Mount LARGE is a heavy-duty link tab from Artec's form-and-function bracket line, built to weld onto 1.75" tubing for mounting lower control arms. Its tapered shape gives a smooth bracket-to-tube transition so there is less bracket to hang up and slide on the rocks, while the 2.625" mounting width accepts common cartridge joints out of the box.

Key Features

• Welds onto 1.75" OD tubing for lower control arm mounting
• Tapered design for a smooth transition off the tube - less to catch on the rocks
• 2.625" mounting width with a 9/16" bolt hole for common cartridge joints (Johnny, Flex, Ballistic)
• Hole drillable for 1.25" rod ends with spacers
• Open bottom seam left clear of jigs so you can lay a clean weld bead
• Bolt a joint in to set proper mounting width before you tack it up
• Made from 1/4" boxed steel plate for strength and impact resistance

Fitment & Compatibility

Universal fabrication bracket, sold as a single. It is designed to weld onto 1.75" outside-diameter tubing and mount lower control arms using common cartridge joints at its 2.625" width, or 1.25" rod ends once drilled out. Use it on custom lower-link and control-arm builds.

Specifications

What's in the Box

• One Tube Link Mount (large)

Frequently Asked Questions

What tube size does it fit?
It is cut to weld onto 1.75" outside-diameter tubing.

What joints does it accept?
The 2.625" mounting width and 9/16" hole fit common cartridge joints such as Johnny, Flex, and Ballistic, and can be drilled for 1.25" rod ends with spacers.

How do I set the mounting width when welding?
Bolt a joint into the bracket to hold the correct width, then tack it in place. The bottom seam is left open by the jig so you can run a clean full bead.

How is this different from the small tube link mount?
The large mount fits 1.75" tube at a 2.625" cartridge-joint width; the Tube Link Mount Small fits 2.0" tube at a 1.75" width for 7/8" rod ends.