This is 2.0" outer-diameter, 0.250" wall DOM (drawn-over-mandrel) tubing from Artec Industries, cut to convenient four-foot lengths. DOM tube runs truer and welds cleaner than plain HREW, which makes it a go-to raw material for suspension links, shackle tubes, bumper builds, and any custom off-road fabrication where you need real strength.
Key Features
- 2.0" outer diameter with a heavy 0.250" (1/4") wall
- DOM construction for consistent wall thickness and a smooth, weld-ready surface
- Nominal 1.5" inner diameter - accepts common 1.5" ID tube adapters and bungs
- Supplied cut to 4 ft (48") lengths, ready to notch and fit
- Ideal stock for lower links, tabs, sleeves, and general chassis fabrication
Fitment & Compatibility
This is a universal raw fabrication material, not a vehicle-specific bolt-on. The 2.0" OD / 0.250" wall size is a popular choice for heavy-duty control-arm and link fabrication. With a nominal 1.5" inner diameter it pairs with 1.5" ID threaded tube adapters such as the 1.25" - 12 TPI tube adapter for 1.5" ID / 2.0" OD tube. If you need a lighter link diameter, Artec also offers 1.5" OD .250" wall DOM tube.
Specifications
| Specification | Detail |
|---|---|
| Material | DOM (drawn-over-mandrel) steel tube |
| Outer diameter | 2.0 in |
| Wall thickness | 0.250 in (1/4") |
| Inner diameter (nominal) | 1.5 in |
| Length | 4 ft (48 in) |
What's in the Box
- One 4 ft length of 2.0" OD x 0.250" wall DOM tube
Frequently Asked Questions
What is DOM tubing and why use it over regular pipe?
DOM stands for drawn-over-mandrel. The tube is cold-drawn over a mandrel, which yields a uniform wall thickness, tighter tolerances, and a cleaner inside surface than standard HREW pipe. That consistency matters for structural parts like suspension links, where strength and predictable weld penetration are important.
What size threaded inserts fit this tube?
With a 2.0" OD and 0.250" wall the inner diameter is nominally 1.5", so it accepts 1.5" ID threaded tube adapters and bungs, including Artec's 1.25"-12 TPI adapter for 1.5" ID / 2.0" OD tube.
How long is each piece?
Each length is cut to four feet (48 inches). Order the quantity you need for your build and cut to final length during fabrication.
Does it come with any coating?
No. This is bare DOM tube intended to be cut, notched, welded, and then finished by the builder.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now and pay later with Affirm.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
