Toyota 4Runner Link Kit Package: $75.00 Instant Rebate and Free Hat!
The Toyota 4Runner Link Kit Package puts Artec Industries' 5th Gen 4Runner Aluminum Rear Link Kit with Track Bar together with a free Artec hat and a $75 instant rebate. The link kit swaps the factory rear control arms and track bar for double-adjustable aerospace-aluminum links riding on Rock Krawler joints and JMX Pro rod ends, so you can dial in pinion angle and axle centering after a lift and keep the articulation your suspension is built for.
Key Features
- 7075 aerospace-grade aluminum lower links and 1.5" OD upper links, polished and rust-resistant
- Double-adjustable ends (right-hand and left-hand thread) for fine-tuning length on the vehicle
- Lower links use 1.25"-12 tpi Rock Krawler Krawler Joints; uppers use 7/8"-14 tpi Rock Krawler joints
- Adjustable track bar on 7/8"-14 tpi JMX Pro rod ends to re-center the rear axle under a lift
- Lighter than a steel link kit while replacing the same factory arms
- Includes a free Artec Industries hat and a $75 instant rebate
Fitment & Compatibility
The link kit fits the 2003+ Toyota 4Runner (4th and 5th generation), plus the 2007+ FJ Cruiser, 2008+ 200-Series Land Cruiser, and 2003+ Lexus GX that share the platform. The included track bar is intended for lifted vehicles only and is not used at stock height. Springs, shocks, limit straps, sway-bar extensions, and extended brake lines are not included and may be required depending on lift height. Prefer to buy the pieces separately? See the 4Runner 5G Aluminum Rear Link Kit and the 4Runner 5G Aluminum Rear Track Bar.
Specifications
| Specification | Detail |
|---|---|
| Lower links | 7075 aluminum, 1.25"-12 tpi Rock Krawler Krawler Joints (9/16" hole) |
| Upper links | 1.5" OD, 7/8"-14 tpi Rock Krawler joints (12mm hole) |
| Track bar | 7/8"-14 tpi JMX Pro rod ends, adjustable |
| Adjustability | Double-adjustable RH/LH thread ends |
| Finish | Polished aluminum |
What's in the Box
- Two upper links and two lower links
- Adjustable rear track bar
- Rock Krawler joints, JMX Pro rod ends, jam nuts, spacers, and mounting hardware
- Free Artec Industries hat
Frequently Asked Questions
What vehicles does this link kit fit?
It fits the 2003+ 4Runner, 2007+ FJ Cruiser, 2008+ 200-Series Land Cruiser, and 2003+ Lexus GX.
Do I need the track bar if my 4Runner is stock height?
The track bar is for lifted vehicles only and is not used at stock height; it re-centers the rear axle once the truck is lifted.
Are springs, shocks, and brake lines included?
No. Springs, shocks, limit straps, sway-bar extensions, and extended brake lines are not included and may be needed depending on your lift.
Why aluminum instead of steel links?
The 7075 aluminum links shed weight and resist rust while still replacing the factory arms, and the double-adjustable ends make setting length and pinion angle easy.
What's included in the package?
The two upper links, two lower links, track bar, all joints and hardware, plus a free Artec Industries hat and a $75 instant rebate.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now and pay later with Affirm.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
