The front lower control arm brackets on a TJ-generation Jeep take the worst of the trail, and the factory pieces bend and tear. Artec's TJ 30-44 HD Lower Control Arm Brackets are the slotted / horseshoe version, built from 1/4" boxed steel and wrapped further around the axle tube for a stronger weld. They keep the factory CAM-bolt caster/alignment adjustment while dramatically beefing up your most-abused front joints.
Key Features
- 2.625" mounting width fits common cartridge joints (Johnny Joint, Flex, Ballistic, etc.) and factory control arm bushings.
- Horseshoe around the CAM bolt is laser-etched with factory alignment lines for easy adjustment.
- Bracket wraps around the axle tube more than factory for additional weld surface area, greatly reducing the chance of the bracket ripping off.
- Made from 1/4" boxed steel plate for strength and impact resistance.
- Grease fitting access on top for easy maintenance of your most abused joint.
Fitment & Compatibility
Fits the front Dana 30 and Rubicon Dana 44 axles of the Jeep Wrangler TJ (1997-2006) and LJ (2004-2006), Cherokee XJ (1984-2001), Comanche MJ (1986-1992), and Grand Cherokee ZJ (1993-1998), including TJ and LJ Rubicon models. Sold as a pair; these are weld-on brackets. Combine them with Artec Inner C Gussets and the Front Axle Truss for TJ, LJ, ZJ for a fully reinforced front housing. If you want the standard (non-HD) version, see the TJ 30-44 Lower Control Arm Brackets.
Specifications
| Specification | Detail |
|---|---|
| Material | 1/4" boxed steel plate |
| Joint width | 2.625" (cartridge joints and factory bushings) |
| Adjustment | Horseshoe CAM slot, laser-etched factory alignment lines |
| Maintenance | Grease fitting access on top |
| Sold as | Pair |
| Part number | TJ3011 |
What's in the Box
- Pair of HD slotted/horseshoe front lower control arm brackets (weld-on)
Frequently Asked Questions
Which Jeeps and axle does this fit?
The front Dana 30 and Rubicon Dana 44 in the TJ (1997-2006), LJ (2004-2006), XJ (1984-2001), MJ (1986-1992), and ZJ (1993-1998), including TJ/LJ Rubicon models.
What is the difference between the HD and standard version?
This HD slotted / horseshoe version wraps the CAM bolt and axle tube for more weld area and keeps the factory alignment slot, with laser-etched reference lines for easy caster adjustment.
What joints do they accept?
The 2.625" mounting width fits common cartridge joints (Johnny Joint, Flex, Ballistic) and factory rubber bushings.
Do they need to be welded?
Yes. They are weld-on brackets that wrap the axle tube for maximum weld surface — use full-penetration welds.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now and pay later with Affirm.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
