Lower Link Frame Bracket (single)

The Artec Industries Lower Link Frame Bracket is a single frame-side mount for the lower link of a custom four-link or three-link suspension. It gives the lower bar a strong, well-located pickup point on the chassis and shares Artec's boxed, finished design so a home-built link setup looks and works like a fabricated one.

Key Features

• Built from 1/4" boxed steel plate for strength at a high-load lower-link pickup.
• 2.625" mounting width with a 9/16" bolt hole for common cartridge joints (Johnny, Flex, Ballistic and similar).
• Bolt hole can be drilled out for 1.25" rod ends with high-misalignment spacers.
• Boxed profile for a clean, one-off look and easy weld-in.
• Designed to locate lower links accurately for better suspension geometry.

Fitment & Compatibility

Universal weld-on fabrication bracket for the frame end of a lower link; it is not a model-specific bolt-in. It pairs directly with the axle-side Lower Link Axle Brackets and works alongside the Inner Frame Bracket for the uppers. Confirm your joint width (2.625") and link path before welding.

Specifications

What's in the Box

• 1 x Lower Link Frame Bracket

Frequently Asked Questions

Is this one bracket or a pair?
It is sold as a single bracket, so order the quantity your link layout requires.

What joints does it accept?
It fits 2.625"-wide cartridge joints with a 9/16" bolt, and the hole can be opened up for 1.25" rod ends using misalignment spacers.

Does it fit a particular vehicle?
No. It is a universal weld-on bracket for custom link builds; you set its position to suit your chassis.

Does it need welding?
Yes. It is weld-on and carries suspension load, so it should be installed with proper structural welds.

What axle bracket goes with it?
The Lower Link Axle Brackets are the matching axle-side lower-link mounts.