Easy 4 Link - Kit C - Triangulated Uppers & Lowers

Easy 4-Link Kit C packages the rod ends, tube adapters, jam nuts, and misalignment spacers for a dual-triangulated four-link — with both the upper and lower control arms angled to locate the axle without a separate track bar. It's Artec's most-requested joint set assembled into one kit so you can build a well-triangulated coil or coilover suspension without sourcing parts piecemeal.

Key Features

• Complete joint set for a dual-triangulated 4-link (triangulated uppers and lowers, no track bar required)
• 7/8"-14tpi x 3/4" bore rod ends and adapters for the upper links
• Heavy 1.25"-12tpi x 1.0" bore rod ends and adapters for the lower links
• 8 WIDE 3/4" high-misalignment spacers for maximum flex
• Multiple build options are offered, including all-1.25" PRO KRAWLER cartridge joints, all-1.25" or mixed 7/8"-upper / 1.25"-lower rod ends, with or without DOM tube, and a brackets-only option.
• Choose PRO KRAWLER cartridge joints for a rebuildable, greaseable option

Fitment & Compatibility

A universal fabrication link-component kit for building a dual-triangulated 4-link on a coil-sprung or coilover solid-axle rig. It supplies the joints, adapters, and hardware (and DOM tube on tube options); you provide the axle and frame brackets and set the geometry. Not vehicle-specific — select the joint and tube configuration that matches your build.

Specifications

What's in the Box

• 2 RH, 2 LH — 7/8"-14tpi x 3/4" bore rod ends (uppers)
• 2 RH, 2 LH — 7/8"-14tpi tube adapters
• 2 RH, 2 LH — 7/8"-14tpi jam nuts
• 8 — 3/4"-9/16" WIDE high-misalignment spacers
• 2 RH, 2 LH — 1.25"-12tpi x 1.0" bore rod ends (lowers)
• 2 RH, 2 LH — 1.25"-12tpi tube adapters
• DOM link tubing (tube options only)

Frequently Asked Questions

What suspension does Kit C build?
A dual-triangulated four-link — both the upper and lower arms are angled, so the axle is located without a separate track bar.

What are my joint and tube options?
Multiple build options are offered, including all-1.25" PRO KRAWLER cartridge joints, all-1.25" or mixed 7/8"-upper / 1.25"-lower rod ends, with or without DOM tube, and a brackets-only option.

How is it different from Kit A and Kit B?
Kit A and Kit B are single-triangulated (triangulated uppers, straighter lowers). Kit C triangulates both uppers and lowers for the most self-locating geometry.

Does it include link brackets?
Only if you choose a bracket option; the standard kit supplies joints, adapters, hardware, and (on tube versions) DOM tube. Frame and axle brackets and geometry are up to your build.