The APEX Truss Upper Link Mounts give your custom link suspension a clean, high-strength attachment point for the upper control arms. Laser cut and CNC bent from 1/4" steel, they bolt your upper links to a flat surface such as an axle truss, and drop straight onto Artec's APEX rear trusses when paired with the optional APEX gusset. They are the mounting backbone for a 3-link or 4-link rear conversion.
Key Features
- CNC laser cut and CNC bent in-house from 1/4" steel for a precise, repeatable fit
- 2.625" mounting width with a 9/16" upper-link bolt hole
- Three adjustable link locations at 7", 8", and 9" from axle centerline to dial in your suspension geometry
- Designed to mount to any flat surface; drops perfectly onto Artec APEX rear trusses with the optional APEX gusset
- Engineered from 3D scan files and made in the USA
Fitment & Compatibility
Universal upper-link mounts intended for custom link-suspension builds. They mount to a flat surface such as an axle truss and are purpose-built to pair with Artec's APEX rear axle trusses when ordered with the APEX gusset. The mount geometry suits 3.0" to 3.5" diameter axle tubes. This is fabrication hardware, not a bolt-on for a specific vehicle year.
Specifications
| Specification | Detail |
|---|---|
| Material | 1/4" steel |
| Construction | CNC laser cut and CNC bent |
| Mounting width | 2.625" |
| Bolt hole | 9/16" |
| Link positions | 7", 8", 9" from axle centerline |
| Axle tube compatibility | 3.0" to 3.5" diameter |
| Origin | Made in the USA |
What's in the Box
- Upper link mount kit in your chosen configuration: Single, Pair, or Pair with APEX Gussets
- Four unwelded pieces per mount that assemble with a jig, ready to weld
Frequently Asked Questions
Do these require welding?
Yes. The mounts arrive as four unwelded pieces that assemble with a jig, then weld to your truss or flat mounting surface. Basic fabrication and welding skills are required.
Will they fit my Artec APEX truss?
Order the "Pair with APEX Gussets" option and they drop directly onto Artec's APEX rear trusses. On other trusses or flat surfaces they can be welded in any of the three link positions.
What upper-link hardware do they use?
The upper-link bolt hole is 9/16", with selectable link locations at 7", 8", and 9" from axle centerline so you can tune anti-squat and pinion angle.
Do I need the APEX gusset?
Only if you are mounting to an Artec APEX truss. The gusset locates and reinforces the mount on the APEX peak. For a generic flat surface you can run the mounts on their own.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now and pay later with Affirm.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
