60 FORD Front Ram Mount & Truss '78-79

The 60 FORD Front Ram Mount & Truss ('78-79) is a weld-on axle truss and integrated hydraulic ram mount built by Artec Industries for the 1978-1979 Ford Dana 60 front axle. It ties the full length of the axle housing together while giving you a purpose-built platform to run a full-hydraulic steering ram, protecting two of the most expensive systems on a hard-wheeled rig: the axle tubes and the steering.

Key Features

• 3/8" mild steel truss top with a 1/4" mild steel ram mount and gussets, precision CNC cut and bent for accurate fitment
• Bend angles account for the geometry of the Ford Dana 60 knuckles
• Low-profile design places link joints with ideal geometry, roughly 8 inches from the axle centerline
• Truss spans the entire length of the axle for complete tube reinforcement, not just a link-mounting pad
• Interlocked 1/4" gussets add strength and make assembly and tack-up easier
• Ram mount is tied into the truss with a 1/4" bridge that also shields the ram from trail damage

Fitment & Compatibility

Designed specifically for the 1978-1979 Ford front Dana 60 axle. The knuckle-angle geometry is unique to this year range, so it is not a substitute for later Ford, Chevy, or Dodge 60 trusses. The integrated ram mount is intended for a full-hydraulic steering setup (for example a PSC/DE double-ended ram). This is a weld-on part and requires cutting, fitting, and welding by a competent fabricator.

Specifications

What's in the Box

• 3/8" truss top section
• 1/4" hydraulic ram mount
• Interlocking 1/4" gussets and 1/4" ram bridge

Frequently Asked Questions

Which axle does this truss fit?
It is built for the 1978-1979 Ford front Dana 60 axle only. The bends are angled for those specific Ford knuckles, so it will not correctly fit later Ford, GM, or Dodge 60 housings.

Does it require welding to install?
Yes. This is a weld-on truss and ram mount. Plan on cutting factory brackets as needed, fully fitting the parts to the housing, and welding everything on. It ships as bare steel with no finish so you can weld directly to clean metal.

What steering does the ram mount support?
The mount is sized for a full-hydraulic steering ram such as a PSC or DE double-ended unit. Pairing it with a matching high-steer arm and tie rod completes the front steering package.

How far from centerline do the links mount?
The low-profile top locates your link joints about 8 inches off the axle centerline, which helps keep suspension geometry sane while clearing the diff.

What else do I need for a full-hydro build?
Most builders pair this with a full-hydro tie rod kit and a Dana 60 full-hydro ram; browse related Artec front 60 steering and truss components at NVMOS to complete the setup.