The 60 Chevy Front Ram Mount and Truss from Artec Industries combines a full-width, low-profile axle truss with an integrated hydraulic ram mount for the Chevy/GM front Dana 60. It reinforces the entire housing while giving you a protected platform to run a full-hydraulic steering ram, shielding both your axle tubes and your steering from trail abuse.
Key Features
- 3/8" mild steel truss top with a 1/4" mild steel ram mount and gussets, precision CNC cut and bent
- Full-width design spans the entire axle for complete tube reinforcement
- Low-profile shape locates link joints with ideal geometry, roughly 8 inches from the axle centerline
- Interlocking 1/4" gussets add strength and simplify assembly
- Ram mount is tied into the truss with a 1/4" bridge that also protects the ram from trail damage
- Ram mount and gussets feature drainage holes to shed mud and reduce weight
Fitment & Compatibility
Fits the Chevy/GM front Dana 60 axle housing. The integrated ram mount is designed for a full-hydraulic steering ram (such as a PSC/DE unit). If you do not need the ram platform, the standard Chevy 60 Front Truss is the truss-only version. This is a weld-on assembly and requires cutting, fitting, and welding to a clean housing.
Specifications
| Specification | Detail |
|---|---|
| Truss top material | 3/8" mild steel |
| Ram mount & gussets | 1/4" mild steel |
| Ram bridge | 1/4" mild steel |
| Profile | Full-width, low-profile |
| Construction | CNC cut and bent, weld-on (ships bare/unfinished for welding) |
| Link geometry | Joints mount approx. 8" from axle centerline |
| Part number | TR6010 |
What's in the Box
- 3/8" full-width truss top
- 1/4" hydraulic ram mount
- Interlocking 1/4" gussets and 1/4" ram bridge
Frequently Asked Questions
What axle is this for?
It fits the Chevy/GM front Dana 60 axle housing. It includes an integrated hydraulic ram mount for full-hydro steering.
Do the drainage holes matter?
Yes. The holes in the ram mount and gussets let mud and water drain out and trim a bit of weight, which helps on a muddy trail rig.
Is welding required?
Yes. It is a weld-on assembly supplied as bare steel. Fit the truss and ram mount to a clean housing, tack, verify ram and steering geometry, then weld it out.
What steering parts complete the build?
Pair it with a hydraulic ram plus the Artec Full Hydro Tie Rod Kit (7/8" JMX Rod Ends) and Ultimate 60 High Steer Arms for a complete front 60 full-hydro system.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now and pay later with Affirm.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
