Ram 1500 RHO and TRX Accessories: Bumpers, Lighting and Badges
The Ram 1500 TRX (2021-2024) and the Ram 1500 RHO (2025 and up) look alike from 50 feet, but they do not share every part. Bumpers, intakes and exhaust are model-specific, while a good chunk of the lighting brackets, storage panels and suspension pieces are listed for both. This guide sorts RHO and TRX accessories by category, bumpers, lighting, badges, suspension and storage, and calls out where the listings say a part crosses over and where it doesn't.
Short answer: Front and rear bumpers, intakes, exhaust and most badge overlays are specific to either the TRX or the RHO, so buy by model. Chase racks, ditch light brackets, rear shock guards, molle panels and several ICON suspension parts are listed for both. When a listing names only one, assume it does not fit the other and call us.
TRX vs RHO: what changed and why it matters for parts
Ram built the TRX for 2021-2024 with the supercharged 6.2L V8. The RHO took over in 2025 with the 3.0L Hurricane twin-turbo inline six. Under the sheet metal they share the 5th gen (DT) Ram 1500 platform, which is why bed and cab accessories often carry over. The front end, engine bay and some sensor packaging changed, which is why bumpers and engine parts generally don't.
The rule we use: trust the fitment line on the listing, not the look of the truck. If a listing says "2021-2024 TRX" and nothing else, treat it as TRX only. For general Ram 1500 parts that cover every trim, start with our Ram 1500 accessories guide.
Do TRX and RHO parts interchange?
Here is how the parts we carry are listed. This is a summary of the product pages, so confirm years on the listing before you order.
| Part | TRX (2021-2024) | RHO (2025+) |
|---|---|---|
| ADD front and rear bumpers | TRX-specific models | RHO-specific models |
| ADD chase racks | Listed | Listed |
| ADD ditch light brackets | Listed | Listed for 2025 RHO |
| ADD rear shock guards | Listed | Listed for 2025 RHO |
| ADD bed cab molle panels | Listed | Listed |
| ICON rear hydraulic bump stops | Listed | Listed |
| ReadyLIFT 1.5 in. pre-load leveling kit | Listed | Not compatible per listing |
| S&B cold air intake | TRX 6.2L kit | Separate RHO kit |
| AWE exhaust | TRX 0FG Exhaust Suite | Separate RHO catback |
Ram RHO front bumpers
Addictive Desert Designs makes the deepest lineup of RHO bumpers we carry. Each is listed for the 2025+ RHO (on the Stealth Fighter, ADD states outright that it fits only the RHO), and every one we list keeps the factory parking sensors and side markers and works with hands-free driving assist.
Which RHO front bumper should I get?
| Bumper | Lighting per listing | Notes |
|---|---|---|
| Stealth Fighter | 40 in. radius bar or up to 10 pods in the center, 1 pod per side | Two 1 in. CNC clevis mounts for 3/4 in. pin D-rings. Winch-ready with an add-on kit. |
| Phantom | 20 in. center bar, single-row 10 in. bar in each side pod | Low-profile knife-edge design, keeps tow hooks, removable 3/16 in. aluminum skid |
| Bomber (Baja) | 3 Baja Designs LP6 rounds, recessed cube mounts in the wings | Plate steel with 3/16 in. aluminum full front skid included |
| Bomber (RIGID) | 4 RIGID 360 6 in. rounds, recessed cube mounts in the wings | Same Bomber body and skid, RIGID light pocket |
Lights are sold separately on all of these. Two add-ons are worth knowing about. The Stealth Fighter RHO winch kit adds a recessed winch mount, and ADD says it is designed only for WARN VR EVO series winches with the solenoid relocated. And the RHO adaptive cruise control relocation bracket moves the ACC sensor behind the grille so adaptive cruise keeps working. ADD lists that bracket as required with the Stealth Fighter, and says it also works with other aftermarket front bumpers.
RHO rear bumpers
The rear lineup mirrors the front. The Stealth Fighter rear adds two clevis mounts and cube light pods and keeps the hitch, trailer plug and backup sensors. The Bomber rear is a steel plate design with a cube light in each side pod, and the Phantom rear holds a single-row 10 inch bar on each side and follows the factory valance.
Ram TRX front bumpers
For the 2021-2024 TRX, ADD offers the same families plus its PRO Bolt-On. All of these are listed for the TRX only.
- TRX Stealth Fighter front bumper: low-profile radiused plate steel. ADD says it improves approach angle by 4 inches over stock, and a full skid covers the front shock reservoirs. Add the TRX Stealth Fighter winch plate kit, which bolts the winch mount to the frame and relocates the oil cooler.
- TRX Phantom front bumper: vented 3/16 inch aluminum skid so air reaches the intercooler, which stays in place. 20 inch center bar and a 10 inch bar behind each side panel.
- TRX Bomber (Baja) and the RIGID version: plate steel with a full aluminum skid and inset round light pockets.
- TRX PRO Bolt-On front bumper: installs with no modifications, takes eight cube lights or a 30 inch radius bar, and accepts an ADD add-on light hoop for four 6 inch rounds.
Out back, the TRX Stealth Fighter rear keeps the hitch, tow hooks, bed step and dual exhaust, and the TRX Phantom rear keeps the backup sensors and trailer wiring plug.
RHO and TRX lighting
Lighting is where TRX owners have the most bolt-on kits, and where RHO owners need to read fitment most carefully. Several kits are written for the 2019-2024 Rebel and 2021-2024 TRX and do not list the RHO.
Lights listed for both TRX and RHO
- ORACLE front bumper flush LED light bar: ORACLE lists it for the 2019-2026 Rebel, TRX and RHO with vehicle-specific mounting, and ORACLE rates it at 100W and 12,000 lumens.
- ADD ditch light brackets: mount to the hood hinge and put a pod at the base of each A-pillar. They take lights up to 6 inches, from a 3 inch cube to a RIGID 360 or Baja LP6 round.
TRX-listed lighting kits
- Baja Designs XL80 A-pillar kit, also offered in XL Pro and XL Sport versions.
- Baja Designs S2 Sport fog pocket kit: Baja says it is plug-and-play with no cutting or splicing.
- Baja Designs S8 20 inch bumper kit for the factory TRX bumper.
- KC HiLiTES SlimLite 8 inch grille kit (KC lists 12,384 lumens per light).
On an RHO, the bumper itself is usually the lighting platform: pick the ADD bumper with the light pocket you want, then fill it. For beam choice, see ditch lights: spot vs flood and our LED pod lights buying guide.
Ram RHO badges, emblems and trim
Tufskinz makes most of the badge and trim overlays we carry for the 2025-2026 Ram. They are domed, peel-and-stick pieces with 3M adhesive that sit over the factory parts. The catch for RHO owners is that not every 2025-2026 Ram 1500 kit fits the RHO.
- Tufskinz RHO fuel inlet ring: made for the RHO fuel spout, in OE-matched colors, chrome, matte black or carbon fiber.
- Tufskinz engine badge: an 8 x 1 inch badge with 3.0L Hurricane and 6.2L TRX options, so it suits both trucks. It goes on any flat surface.
- Tufskinz grille letter overlays: Tufskinz states these do not fit the RHO trim. Non-RHO 2025-2026 trucks only.
- Tailgate letter overlays and hood letter overlays: listed for the 2025-2026 Ram 1500. The listings don't say either way whether they fit the RHO, so call us before ordering these for one.
- Interior pieces like the start button ring and Tufskinz A/C vent and door switch trim are listed for the 2025-2026 Ram 1500 interior. For a TRX, the door sill protection overlays cover 2019-2026 Ram 1500 sills.
For more on how stick-on overlays work and how to install them, see our truck emblems and badges guide.
Shop Tufskinz badges and trim →
TRX and RHO suspension upgrades
Both trucks come with long-travel suspension from the factory, so a lot of owners tune and protect it rather than chase a big lift. ICON lists three parts for both models:
- ICON rear 2.5 inch hydraulic bump stop kit: 2.25 inches of travel, bolts on top of the rear coils and is reversible to stock. ICON says it improves bottom-out control and reduces rear kick.
- ICON front coilover spacer kit: .625 to 2.125 inches of front lift, keeps the active damping working and installs without tearing down the coilovers.
- ICON billet front upper control arms with Delta Joint Pro: adjustable camber and caster on the truck.
The ReadyLIFT 1.5 inch pre-load leveling kit is TRX only. ReadyLIFT says it does not fit RHO trucks or TRX trucks with aftermarket coilovers. For leveling versus lifting in general, read leveling kit vs lift kit and the Ram 1500 lift kit guide.
Storage, armor and engine parts
ADD's chase racks are listed for both trucks. The Race Series chase rack carries a 50 inch bar on an electronic actuator that raises and lowers it, and the Stealth Fighter chase rack is a clamp-mount plate design with no drilling. The bed cab molle panels and matching bed side panels cover 2019-2024 Ram 1500 and TRX plus the RHO; some drilling is required.
Inside, the center console molle panels and device bridge (drilling and riv nuts required) and ADD's dash device mount give you AMPS-pattern mounting points. Underneath, the rear shock guards protect the low rear shock mounts with 3/16 inch steel.
The engine parts we carry don't cross over, since the TRX runs the supercharged 6.2L and the RHO the 3.0L twin-turbo. S&B makes a TRX 6.2L cold air intake and a separate RHO cold air intake. Some S&B intakes can't ship to California, so check the product page if you're there. AWE likewise sells a TRX exhaust and a separate RHO catback.
What NVMOS carries
We carry the ADD TRX and RHO bumper lines, Tufskinz Ram trim, ICON suspension, and lighting from Baja Designs, ORACLE and KC HiLiTES. A few places to start:
- ADD RHO Stealth Fighter front bumper
- ADD RHO ACC relocation bracket
- ADD TRX Stealth Fighter front bumper
- ORACLE Rebel/TRX/RHO flush light bar
- Tufskinz RHO fuel inlet ring
- ICON TRX/RHO rear hydraulic bump stops
Browse by category: RAM 1500, Addictive Desert Designs, Off-road front bumpers, Rear bumpers, Chase racks, Fog and ditch light mounts, LED light bars, Baja Designs, ORACLE Lighting, Tufskinz, ICON Vehicle Dynamics, Shop by vehicle and vendor warranty policies.
Shop Addictive Desert Designs →
Frequently asked questions
Do Ram TRX bumpers fit the Ram RHO?
No. Addictive Desert Designs builds separate front and rear bumpers for the 2021-2024 TRX and the 2025+ RHO, and ADD states its RHO Stealth Fighter front bumper fits only the RHO. Buy the bumper listed for your truck.
What year is the Ram 1500 RHO?
The RHO replaced the TRX as Ram's high-performance off-road 1500 starting with the 2025 model year. The TRX was built for 2021-2024. Most of the RHO parts we carry are listed for 2025-2026 or 2025+.
Which TRX parts also fit the RHO?
Per the listings, the ADD chase racks, ditch light brackets, rear shock guards, center console molle panels, bed molle panels and dash device mount, plus the ICON rear bump stops, front coilover spacers and billet upper control arms, are all listed for both the TRX and RHO. Check each product page for the exact model years.
Will an aftermarket front bumper break adaptive cruise on my RHO?
It can, because the factory sensor loses its mount. ADD's Stealth Fighter RHO bumper lists its RHO ACC relocation bracket as required to keep adaptive cruise working, and ADD says the bracket also works with other aftermarket front bumpers.
Do Ram 1500 badges and letter overlays fit the RHO?
Some do and some don't. Tufskinz states its 2025-2026 Ram grille letter overlays do not fit the RHO trim, while its RHO fuel inlet ring is made for the RHO. Read the fitment line on each listing before ordering.
Can I level a TRX or RHO?
The ReadyLIFT 1.5 inch pre-load spacer kit is listed for the TRX only and says it does not fit RHO trucks or TRX trucks with aftermarket coilovers. ICON's front coilover spacer kit is listed for both the TRX and RHO, with .625 to 2.125 inches of adjustable lift.
Not sure what fits? Call a real person at (920) 249-7744 or send us a message, and we'll check fitment before you order.






