ReadyLIFT 3" SST3.3 Suspension System With Falcon 3.3 Struts/Shocks - Toyota Tundra 2022-2026
Warranty Information
Vendor warranty summary
ReadyLIFT Warranty
At a glance: Defective parts replaced with no stated time limit; wear parts up to 1 year
This is ReadyLIFT's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Lift and leveling kit components | Lifetime replacement for defects (original buyer) |
| Wear parts: shocks, ball joints, heim joints, bushings, steering extensions | Up to 1 year |
| Discontinued, clearance or outlet products | Not covered |
- Original purchaser only — coverage does not transfer if you sell it.
What's covered
- Missing or defective components: if a part breaks, ReadyLIFT sends a new one
- ReadyLIFT may ask for the old part back at its own cost for analysis, without holding up the replacement
- Jeep SST and Terrain Flex kits are covered for recreational off-road use
What's not covered
- Off-road abuse (except Jeep SST and Terrain Flex kits)
- Discontinued, clearance and outlet items
- Labor, installation, surcharges and fees
- Resulting damage to the vehicle
How to make a ReadyLIFT warranty claim
- Call ReadyLIFT customer service to start a claim (7:30am-4pm MST)
- ReadyLIFT ships the replacement part, quickly where possible
ReadyLIFT contact: Phone: 800-549-4620 (toll free); 702-410-2300 · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to ReadyLIFT, and help it along either way.
Shop ReadyLIFT at NVMOS
ReadyLIFT 8" Lift Kit - Toyota Tundra 2007-2021 W/ Bilstein Shocks
ReadyLIFT 1.5" Rear Add-A-Leaf Kit - Ford F-150
ReadyLIFT 7/8" Wheel Spacers W/ Studs - GM 1500
See all ReadyLIFT products, lead times and FAQs →
Disclaimer: The information on this page describes ReadyLIFT's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: ReadyLIFT official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
ReadyLIFT is an Ogden, Utah suspension brand built around more tire clearance with close-to-factory ride. NVMOS carries ReadyLIFT leveling kits, SST mid-lifts, Big Lift kits, rear blocks, control arms and wheel spacers for Ford, GM, Ram, Toyota and Jeep trucks.
Based in: Ogden, Utah · Founded: 2006 · Lead time: In-stock ships in 24–48 hrs
Shop all 551 ReadyLIFTWarrantyAll brands
Warranty terms are set by ReadyLIFT, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
ReadyLIFT 3" SST3.3 Suspension System With Falcon 3.3 Coilovers for 2022-2026 Toyota Tundra
The ReadyLIFT 62-52460 is a 3" suspension system for the 2022-2026 Toyota Tundra, including trucks with the i-FORCE MAX hybrid powertrain. It features Falcon 3.3 Fast Adjust monotube coilover struts and rear shocks, plus a high-angle CV axle kit. Browse more Toyota Tundra parts.
The dampers offer 3-position compression (Soft, Custom, Firm) and an 8-position Micro Adjust dial, with Red Line high-temp oil, a reservoir design and Volume Optimized Damping. A long-travel dual-rate coil and a Falcon progressive rate bump stop replace the rigid OE external stop for better bottom out control. See other shock absorbers for comparison.
| Spec | Detail |
|---|---|
| Front lift | 3" |
| Dampers | Falcon 3.3 Fast Adjust monotube coilovers and rear shocks |
| Adjustment | 3-position compression plus 8-position Micro Adjust |
| Max tire | 35x12.5 on 18x9 wheels, +12 mm offset |
| SKU | 62-52460 |
2022-2026 Toyota Tundra including i-FORCE MAX hybrid trucks. Not compatible with Tundra TRD Pro or trucks with Load-Leveling Rear Height Control Air Suspension. The factory TRD skid plate cannot be reinstalled unless you use optional part 67-52050, sold separately.
Install guides & documents
Complete your Toyota Tundra build
The pieces owners run with this one — matched to your Toyota Tundra and to each other. Do the whole truck in one order instead of three.
More for your Toyota Tundra
Picked from the 1491 parts we carry for the Toyota Tundra, matched to 2022–2026 model years. Check the years and trim in each title — or call us and we’ll confirm fit.
ReadyLIFT 3" SST3.3 Suspension System With Falcon 3.3 Struts/Shocks FAQs
Does it fit the i-FORCE MAX Tundra?
Yes. It is built for 2022-2026 Tundras including i-FORCE MAX hybrid trucks.
Will it fit a TRD Pro?
No. It is not compatible with Tundra TRD Pro or load-leveling air suspension.
What about the TRD skid plate?
You can reinstall it only with optional part 67-52050, sold separately.
Are CV axles included?
Yes. A high-angle CV axle kit is included.
Multi-column

Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!

Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.

Contact Us
Have a question? Just send us an e-mail at support@nvmos.com








































