ReadyLIFT 3" SST2.1 Suspension System With Falcon 2.1 Struts/Shocks - Toyota Tundra 2022-2026
Warranty Information
Vendor warranty summary
ReadyLIFT Warranty
At a glance: Defective parts replaced with no stated time limit; wear parts up to 1 year
This is ReadyLIFT's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Lift and leveling kit components | Lifetime replacement for defects (original buyer) |
| Wear parts: shocks, ball joints, heim joints, bushings, steering extensions | Up to 1 year |
| Discontinued, clearance or outlet products | Not covered |
- Original purchaser only — coverage does not transfer if you sell it.
What's covered
- Missing or defective components: if a part breaks, ReadyLIFT sends a new one
- ReadyLIFT may ask for the old part back at its own cost for analysis, without holding up the replacement
- Jeep SST and Terrain Flex kits are covered for recreational off-road use
What's not covered
- Off-road abuse (except Jeep SST and Terrain Flex kits)
- Discontinued, clearance and outlet items
- Labor, installation, surcharges and fees
- Resulting damage to the vehicle
How to make a ReadyLIFT warranty claim
- Call ReadyLIFT customer service to start a claim (7:30am-4pm MST)
- ReadyLIFT ships the replacement part, quickly where possible
ReadyLIFT contact: Phone: 800-549-4620 (toll free); 702-410-2300 · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to ReadyLIFT, and help it along either way.
Shop ReadyLIFT at NVMOS
ReadyLIFT 8" Lift Kit - Toyota Tundra 2007-2021 W/ Bilstein Shocks
ReadyLIFT 1.5" Rear Add-A-Leaf Kit - Ford F-150
ReadyLIFT 7/8" Wheel Spacers W/ Studs - GM 1500
See all ReadyLIFT products, lead times and FAQs →
Disclaimer: The information on this page describes ReadyLIFT's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: ReadyLIFT official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
ReadyLIFT is an Ogden, Utah suspension brand built around more tire clearance with close-to-factory ride. NVMOS carries ReadyLIFT leveling kits, SST mid-lifts, Big Lift kits, rear blocks, control arms and wheel spacers for Ford, GM, Ram, Toyota and Jeep trucks.
Based in: Ogden, Utah · Founded: 2006 · Lead time: In-stock ships in 24–48 hrs
Shop all 551 ReadyLIFTWarrantyAll brands
Warranty terms are set by ReadyLIFT, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
ReadyLIFT 3" SST2.1 Suspension System With Falcon 2.1 Struts for 2022-2026 Toyota Tundra
The ReadyLIFT 62-52420 is a 3" suspension system for the 2022-2026 Toyota Tundra. It includes Falcon 2.1 front replacement struts and rear shocks, for a bold stance and better ride. Tires up to 35x12.50 fit on 18x9 wheels with +12 mm offset. Browse more Toyota Tundra parts.
For the first time ReadyLIFT includes a CV axle kit, a high-angle design for travel and reduced vibration. You also get a heavy-duty full-coverage front skid plate, 1.5" upper control arms with optimized ball joint angles, and custom steering stops. Installation is bolt-on. See other shock absorbers too. It is not compatible with load-leveling air suspension, TRD Pro or AVS trucks.
| Spec | Detail |
|---|---|
| Front lift | 3" |
| Struts and shocks | Falcon 2.1 series |
| Max tire | 35x12.50 on 18x9, +12 mm offset |
| Control arms | 1.5" upper control arms |
| SKU | 62-52420 |
2022-2026 Toyota Tundra. Not compatible with Load-leveling Rear Height Control Air Suspension, TRD Pro Off-Road Suspension or Adaptive Variable Suspension (AVS). To keep the TRD Pro skid plate, you need Skid Plate Drop Kit 67-52050.
Install guides & documents
Complete your Toyota Tundra build
The pieces owners run with this one — matched to your Toyota Tundra and to each other. Do the whole truck in one order instead of three.
More for your Toyota Tundra
Picked from the 1491 parts we carry for the Toyota Tundra, matched to 2022–2026 model years. Check the years and trim in each title — or call us and we’ll confirm fit.
ReadyLIFT 3" SST2.1 Suspension System With Falcon 2.1 Struts/Shocks FAQs
Does it fit the Tundra TRD Pro?
No. It is not compatible with TRD Pro Off-Road Suspension, AVS or load-leveling air suspension.
Is a CV axle kit included?
Yes. A new high-angle CV axle kit is included.
What tire size can I run?
Up to 35x12.50 tires on 18x9 wheels with +12 mm offset.
Do I need cutting or welding?
No. It is a bolt-on install with no cutting.
Multi-column

Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!

Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.

Contact Us
Have a question? Just send us an e-mail at support@nvmos.com












































