ReadyLIFT 2" Front Leveling Kit W/ Falcon 2.1 Shocks And Forged Torsion Key - GM 2500/3500 HD 2020-2026
Warranty Information
Vendor warranty summary
ReadyLIFT Warranty
At a glance: Defective parts replaced with no stated time limit; wear parts up to 1 year
This is ReadyLIFT's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Lift and leveling kit components | Lifetime replacement for defects (original buyer) |
| Wear parts: shocks, ball joints, heim joints, bushings, steering extensions | Up to 1 year |
| Discontinued, clearance or outlet products | Not covered |
- Original purchaser only — coverage does not transfer if you sell it.
What's covered
- Missing or defective components: if a part breaks, ReadyLIFT sends a new one
- ReadyLIFT may ask for the old part back at its own cost for analysis, without holding up the replacement
- Jeep SST and Terrain Flex kits are covered for recreational off-road use
What's not covered
- Off-road abuse (except Jeep SST and Terrain Flex kits)
- Discontinued, clearance and outlet items
- Labor, installation, surcharges and fees
- Resulting damage to the vehicle
How to make a ReadyLIFT warranty claim
- Call ReadyLIFT customer service to start a claim (7:30am-4pm MST)
- ReadyLIFT ships the replacement part, quickly where possible
ReadyLIFT contact: Phone: 800-549-4620 (toll free); 702-410-2300 · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to ReadyLIFT, and help it along either way.
Shop ReadyLIFT at NVMOS
ReadyLIFT 8" Lift Kit - Toyota Tundra 2007-2021 W/ Bilstein Shocks
ReadyLIFT 1.5" Rear Add-A-Leaf Kit - Ford F-150
ReadyLIFT 7/8" Wheel Spacers W/ Studs - GM 1500
See all ReadyLIFT products, lead times and FAQs →
Disclaimer: The information on this page describes ReadyLIFT's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: ReadyLIFT official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
ReadyLIFT is an Ogden, Utah suspension brand built around more tire clearance with close-to-factory ride. NVMOS carries ReadyLIFT leveling kits, SST mid-lifts, Big Lift kits, rear blocks, control arms and wheel spacers for Ford, GM, Ram, Toyota and Jeep trucks.
Based in: Ogden, Utah · Founded: 2006 · Lead time: In-stock ships in 24–48 hrs
Shop all 551 ReadyLIFTWarrantyAll brands
Warranty terms are set by ReadyLIFT, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
ReadyLIFT 2" Falcon 2.1 Leveling System for 2020-2026 Silverado/Sierra HD
This is a complete Falcon Performance Leveling System for 2020-2026 Chevrolet Silverado and GMC Sierra 2500/3500 HD trucks. It gives you a true 2" front level and Falcon 2.1 monotube shocks at all four corners. See more leveling kits from ReadyLIFT.
Forged torsion keys and inner fender brackets handle the lift, and the shocks are custom-tuned for GM HD applications. It is a bolt-on install with no cutting or welding. Check the rest of our full-size truck parts while you are here. Set the torsion key so the wheel center to fender edge does not exceed 26", or the truck will overlift.
| Spec | Detail |
|---|---|
| Front level | 2" |
| Wheel clearance | 20x9 with +18 or 0 mm offset |
| Max tire | 35x12.50 (trimming may be needed on 0 mm offset) |
| SKU | 66-30321 |
- Torsion bar key, 0-3"
- Falcon front shock
- Falcon rear shock
- GM HD front fender bracket
2020-2026 Chevrolet Silverado and GMC Sierra 2500/3500 HD.
Install guides & documents
Complete your build
The pieces owners run with this one — matched to your build and to each other. Do the whole truck in one order instead of three.
ReadyLIFT 2" Front Leveling Kit W/ Falcon 2.1 Shocks And Forged Torsion Key FAQs
Is cutting or welding needed?
No. It is a bolt-on system that needs no cutting or welding.
What wheels and tires fit?
20x9 wheels with +18 or 0 mm offset and up to 35x12.50 tires. Trimming may be required on some tire designs with 0 mm offset.
Which trucks is it for?
2020-2026 Chevrolet Silverado and GMC Sierra 2500/3500 HD.
How far can I set the torsion key?
Do not exceed 26" from the wheel center to the fender edge. Going past that overlifts the truck and hurts ride quality and parts life.
Multi-column

Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!

Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.

Contact Us
Have a question? Just send us an e-mail at support@nvmos.com




























