INEOS Grenadier: DTP-06-2S to 2-Port Weather Pack Cable

Connect Weather Pack-equipped accessories to your INEOS Grenadier's factory rooftop power without cutting or modifying a single wire. This short 18-inch adapter takes a DTP-06-2S male plug for the Grenadier's rooftop DTP port and breaks it out to two 2-pin Weather Pack male outputs, so you can feed a pair of medium-current accessories — work lights, auxiliary fans, or 12V camp equipment — from one EXT port. It's a true plug-and-play bridge between the factory Deutsch DTP standard and the common Weather Pack connector.

Key Features

• DTP-06-2S male input sized for the Grenadier's factory rooftop DTP outlet
• Two 2-pin Weather Pack male outputs to run a pair of accessories from one port
• Compact 18-inch length keeps the connection tidy right at the port
• IP65 weatherproof connectors for confident exterior use
• 12V DC, 15A total capacity across both outputs
• No splicing, cutting, or crimping — factory wiring stays intact and reversible

Fitment & Compatibility

Fits INEOS Grenadier (2023–present) models with factory rooftop DTP power ports, all trims. It's intended for accessories that use, or can be fitted with, a 2-pin Weather Pack connector. Combined draw of both outputs must stay within the source EXT port's fuse rating.

Specifications

What's in the Box

• 1× DTP-06-2S male to 2-port Weather Pack 2-pin male adapter cable (18")

Frequently Asked Questions

Which DTP cable do I need if my accessory uses a Weather Pack connector?
This one. It's the direct bridge from the Grenadier's DTP-06-2S rooftop port to Weather Pack 2-pin accessories, and it gives you two outputs for medium-current gear like LED light bars, fans, and pumps. For an Anderson SB50 device pick the DTP to Anderson SB50 cable; for a sealed IP65 device use a DTP to IP65 cable.

Does it split one port into two?
Yes. A single DTP-06-2S input feeds two Weather Pack outputs, so you can run two accessories from one rooftop port without adding a separate splitter.

Do I have to modify any factory wiring?
No. The DTP end plugs into the factory rooftop port and your accessories plug into the Weather Pack outputs. Nothing is cut or spliced, and it unplugs to return to stock.

How much can it carry?
12V DC with 15A total across both outputs. Keep the combined accessory draw within that figure and within the source port's fuse rating.

What if I need more DTP outputs elsewhere on the roof?
Add a DTP to IP65 waterproof splitter or one of our other Grenadier DTP power adapters to expand another port.