INEOS Grenadier: DTP-06-2S Male to 2-Way DTP04-2P Female Splitter

This DTP splitter lets you run two accessories from a single INEOS Grenadier rooftop outlet. One DTP06-2S male plug goes into the factory EXT port, and two DTP-04-2P female outputs come back out — so a single connection now powers a pair of devices. It is a balanced splitter, plug-and-play, with no cutting, crimping, or changes to your OEM wiring.

Key Features

• Splits one factory DTP outlet into two DTP-04-2P female outputs
• Balanced design shares the circuit evenly between both legs
• Locking, weatherproof DTP connectors keep the connection secure on the roof
• True plug-and-play — no tools, no crimping, no splicing
• Leaves factory OEM wiring completely intact and fully reversible
• Frees up a second powered connection when your EXT ports are already allocated

Fitment & Compatibility

Fits the INEOS Grenadier across all trims, connecting to the factory DTP rooftop outlets (typically EXT2 or EXT3). The Grenadier has a fixed number of EXT outlets, so this splitter is the clean way to add a second accessory once your ports are spoken for. A common pairing is running a directional side light and a wide-beam flood from the same port.

Specifications

What's in the Box

• 1x DTP splitter cable — DTP06-2S male to 2x DTP-04-2P female

Frequently Asked Questions

What does this splitter do?
It converts a single Grenadier DTP rooftop outlet into two DTP-04-2P female connections, letting you power two accessories from one EXT port without adding wiring.

How much can I run through it?
The combined wattage of both connected accessories must stay within the EXT port's rated output. As a rule of thumb, two lights drawing around 30W each (about 60W total) is a typical safe load; check your port rating for higher-draw gear.

Does it need any wiring or crimping?
No. It plugs directly into the factory DTP outlet and your accessories plug into it — no cutting, splicing, or crimping, and nothing about the OEM harness is modified.

What is the difference between this and the unbalanced version?
This is the balanced splitter, which shares the circuit evenly between both legs. If you need fixed-length legs for a specific routing, see our DTP-06-2S to 2-Way DTP04-2P-U unbalanced splitter.

What is a typical use case?
Running a LED Side Light and an LED Side Flood Light from the same EXT outlet — directional trail lighting and wide-area flood from one connection.