INEOS Grenadier: Front Bumper 2-Light Set
Warranty Information
Vendor warranty summary
DVA Mechanics Warranty
At a glance: No written warranty published — we handle defects with the brand for you
This is DVA Mechanics's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
What to expect
DVA Mechanics doesn't publish a written warranty that we could find. In practice, parts that arrive damaged or show a manufacturing defect are handled between us and DVA Mechanics — you don't have to chase the brand on your own.
What DVA Mechanics does publish
- Products that arrive damaged or defective are replaced free
- Email support (replies within 4 business hours, Mon-Fri) or use the site chat/contact form
- Include your order details and photos of the damage or defect
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to DVA Mechanics, and help it along either way.
Shop DVA Mechanics at NVMOS
INEOS Grenadier: Exterior Utility Belt - Rear Section-Only
INEOS Grenadier: Front Bumper 2-Light Set
Mercedes Sprinter: DualTrack-T™ Cross Bar Rail Kit with L-Track & T-Bolt
See all DVA Mechanics products, lead times and FAQs →
Disclaimer: The information on this page describes DVA Mechanics's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: DVA Mechanics official policy pages. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
DVA Mechanics is an Alpharetta, Georgia company that designs accessories for exactly two vehicles: the INEOS Grenadier and the Mercedes-Benz Sprinter. NVMOS carries DVA roof rails and crossbars, carriers, utility belts, lighting, power accessories and more. For owners who want bolt-on parts that look like they came from the factory.
Based in: Alpharetta, Georgia · Founded: 2024 · Lead time: In-stock items ship in 24–48 hours
Shop all 54 DVA MechanicsWarrantyAll brands
Warranty terms are set by DVA Mechanics, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
The INEOS Grenadier Front Bumper 2-Light Set adds roughly 8,800 combined lumens of focused forward light to your Grenadier without the bulk of a full-width bar. Two compact Cree 4-chip pods bolt to the DVA front bumper mount and plug straight into the truck's factory power, giving you serious night and trail visibility while keeping the front end looking OEM. It is purpose-built for the Grenadier's bumper opening, so there are no universal brackets and no misalignment.
Key Features
- Two Cree 4-chip LED pods, ~40W each, for ~80W and ~8,800 lumens of combined forward output
- IP68-rated housings sealed against water, dust, and pressure washing
- Plug-and-play DTP connector wiring — two harnesses included, one for a direct factory auxiliary connection and one for an aftermarket lighting controller
- Compact twin-pod layout delivers concentrated throw without the visual mass of a full light bar
- Engineered specifically for the Grenadier's bumper opening and the DVA bumper light mount for a centered, factory-clean face
Fitment & Compatibility
Fits the INEOS Grenadier (2023–present). This is the light set only — it requires the Grenadier Front Bumper Light Mount, sold separately, to install. If you would rather buy both together, we also offer the complete Mount + 2-Light kit.
Specifications
| Specification | Detail |
|---|---|
| Light count | 2-pod LED set |
| LED type | Cree 4-chip units |
| Power per light | ~40W (4 chips x 10W) |
| Total system power | ~80W |
| Combined output | ~8,800 lumens |
| Weather rating | IP68 |
| Connector | DTP plug-in (wiring included) |
| Required mount | DVA Front Bumper Light Mount (sold separately) |
| Vehicle | INEOS Grenadier (2023–present) |
What's in the Box
- 2-light Cree LED bumper bar assembly
- Lighting-controller connection harness
- Direct factory auxiliary power harness
- Mounting hardware
Frequently Asked Questions
Do I need anything else to install this light set?
Yes. This is the 2-light set only. It mounts to the DVA Front Bumper Light Mount, which is sold separately. If you do not already own the mount, order it alongside this set or buy the complete Mount + 2-Light kit.
How bright is the 2-light set?
Each Cree 4-chip pod draws about 40W, for roughly 80W and about 8,800 combined lumens of controlled forward illumination — enough for confident night driving, trail use, and poor-weather visibility.
Do I have to cut or drill my bumper?
No. The set plugs into the vehicle with an included DTP harness and bolts to the DVA mount, which uses factory mounting points. No cutting, drilling, or splicing is required.
Can I run these with an aftermarket light controller?
Yes. Two harnesses are included — one for a direct factory auxiliary connection and one for integration with a centralized aftermarket lighting controller.
Is it weatherproof enough for overlanding?
The pods carry an IP68 rating, sealing them against dust, submersion, and high-pressure water, so they hold up to trail, weather, and wash-down use.
Complete your Ineos Grenadier build
More parts that fit your Ineos Grenadier and pair well with this one — matched and ready to install.
$99.00
$449.00
$799.00
$139.00
$359.00
More for your Ineos Grenadier
Picked from the 64 parts we carry for the Ineos Grenadier. Check the years and trim in each title — or call us and we’ll confirm fit.
INEOS Grenadier: Front Bumper 2-Light Set FAQs
Do I need anything else to install the Grenadier 2-light set?
Yes. It requires the Grenadier Front Bumper Light Mount, sold separately. A complete Mount + 2-Light kit is also offered.
How bright is it?
Two Cree 4-chip pods at about 40W each give about 80W and roughly 8,800 combined lumens. The housings are IP68 rated.
Does it need cutting or splicing?
No. It plugs into the truck with an included DTP harness and bolts to the DVA mount, with no cutting, drilling, or splicing.
Can I use an aftermarket lighting controller?
Yes. Two harnesses are included, one for a direct factory auxiliary connection and one for an aftermarket lighting controller.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
