INEOS Grenadier: DTP-06-2S Male to 2-Way DTP04-2P-U Unbalanced Female Splitter

Run two accessories from a single rooftop power port on your INEOS Grenadier. This splitter plugs a DTP06-2S male connector straight into a factory EXT rooftop outlet and breaks it out into two independent DTP-04-2P female outputs on unequal legs — one short 15 cm tail and one long 100 cm tail. The uneven “unbalanced” leg lengths let you reach an accessory right at the port and a second one a meter away, such as lights positioned over the front and rear doors, without cutting or splicing a single factory wire.

Key Features

• One DTP06-2S male input; two DTP-04-2P female outputs on independent load paths
• Unbalanced leg design: one 15 cm leg and one 100 cm leg to reach accessories at different distances from the port
• Sealed, locking Deutsch DTP connectors rated to IP65 for dust and water-spray resistance
• Plug-and-play install with no tools, no crimping, and no cutting — fully reversible
• Keeps OEM rooftop wiring completely intact so you preserve factory power connections
• Frees up a second accessory feed when your EXT ports are already allocated

Fitment & Compatibility

Fits the INEOS Grenadier (2023–present), all trims, including Station Wagon and Quartermaster. It mates with the vehicle's factory rooftop DTP accessory outlets — DVA recommends installing on the EXT2 or EXT3 rooftop ports. It works with any accessory that terminates in a DTP-04-2P male connector, including DVA-style roof-mounted DTP lighting. Combined draw of both accessories must stay within the source EXT port's fuse rating.

Specifications

What's in the Box

• 1× DTP splitter cable — DTP06-2S male to 2× DTP-04-2P female (one 15 cm leg, one 100 cm leg)

Frequently Asked Questions

Which DTP splitter do I need — this unbalanced one or the balanced version?
Choose this unbalanced splitter when your two accessories sit at different distances from the port — the short 15 cm and long 100 cm legs reach one device close and one farther away, like lights above the front and rear doors. If both accessories sit the same distance from the port, our balanced DTP-06-2S to 2-Way DTP04-2P splitter uses even-length legs instead.

Do I need to modify any factory wiring to install it?
No. It plugs into an existing rooftop DTP outlet and the accessories plug into it. There is no cutting, splicing, or crimping, and the whole thing unplugs to return the vehicle to stock.

Can both outputs run at the same time?
Yes, both outputs are live simultaneously. The only limit is the source EXT port's fuse — keep the combined wattage of both accessories within that port's rating.

What connector do my accessories need?
Each output is a DTP-04-2P female, so your accessory needs a matching DTP-04-2P male plug. To convert an output to a sealed IP65 or Weather Pack accessory, see our other Grenadier DTP power adapters.

Will it power two roof-mounted side lights?
Yes — a common use is feeding two DTP side lights from one port. It pairs naturally with our roof-bar-mount DTP plug-in side lights.