ReadyLIFT 6" Lift Kit With Falcon Shocks - Ram 1500 With Factory Air Suspension & 22" Wheels With Big Bore Knuckle - 2019-2024
Warranty Information
Vendor warranty summary
ReadyLIFT Warranty
At a glance: Defective parts replaced with no stated time limit; wear parts up to 1 year
This is ReadyLIFT's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Lift and leveling kit components | Lifetime replacement for defects (original buyer) |
| Wear parts: shocks, ball joints, heim joints, bushings, steering extensions | Up to 1 year |
| Discontinued, clearance or outlet products | Not covered |
- Original purchaser only — coverage does not transfer if you sell it.
What's covered
- Missing or defective components: if a part breaks, ReadyLIFT sends a new one
- ReadyLIFT may ask for the old part back at its own cost for analysis, without holding up the replacement
- Jeep SST and Terrain Flex kits are covered for recreational off-road use
What's not covered
- Off-road abuse (except Jeep SST and Terrain Flex kits)
- Discontinued, clearance and outlet items
- Labor, installation, surcharges and fees
- Resulting damage to the vehicle
How to make a ReadyLIFT warranty claim
- Call ReadyLIFT customer service to start a claim (7:30am-4pm MST)
- ReadyLIFT ships the replacement part, quickly where possible
ReadyLIFT contact: Phone: 800-549-4620 (toll free); 702-410-2300 · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to ReadyLIFT, and help it along either way.
Shop ReadyLIFT at NVMOS
ReadyLIFT 8" Lift Kit - Toyota Tundra 2007-2021 W/ Bilstein Shocks
ReadyLIFT 1.5" Rear Add-A-Leaf Kit - Ford F-150
ReadyLIFT 7/8" Wheel Spacers W/ Studs - GM 1500
See all ReadyLIFT products, lead times and FAQs →
Disclaimer: The information on this page describes ReadyLIFT's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: ReadyLIFT official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
ReadyLIFT is an Ogden, Utah suspension brand built around more tire clearance with close-to-factory ride. NVMOS carries ReadyLIFT leveling kits, SST mid-lifts, Big Lift kits, rear blocks, control arms and wheel spacers for Ford, GM, Ram, Toyota and Jeep trucks.
Based in: Ogden, Utah · Founded: 2006 · Lead time: In-stock ships in 24–48 hrs
Shop all 551 ReadyLIFTWarrantyAll brands
Warranty terms are set by ReadyLIFT, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
ReadyLIFT 6" Lift Kit With Big Bore Knuckles for 2019-2024 Ram 1500 Air Suspension and 22" Wheels
The ReadyLIFT 44-19623 is the 6" lift kit for 2019-2024 Ram 1500 trucks that came with factory air suspension and 22" wheels. It includes big bore cast iron knuckles for the larger wheel bearing. Browse more Ram 1500 parts.
The kit has two crossmembers, four top mount air strut extensions, two Falcon 1.1 monotube rear shocks, a rear panhard bar bracket, two sway bar end links and a skid plate. It allows up to 37x12.50 tires on 9" wheels with 0 offset. 18" wheels cannot be used. See our shock absorbers as well.
| Spec | Detail |
|---|---|
| Lift | 6" |
| Recommended max tire, no trimming | 37x12.50 on 20x9, 0 offset |
| Max with trimming | 37x12.50 on 20x10, -18 offset |
| Rear shocks | Falcon 1.1 monotube |
| SKU | 44-19623 |
- 2 crossmembers
- 2 cast iron big bore knuckles
- 4 top mount air strut extensions
- 2 Falcon 1.1 monotube shocks
- 1 rear panhard bar bracket
- 2 sway bar end links
- 1 skid plate
- Hardware and brackets
2019-2024 Ram 1500 with factory air ride and 22" wheels. Not for non-air-ride trucks, diesel applications or the 3.0-liter twin-turbo Hurricane engine (some late 2024 models). Single cab fitment has not been validated.
Install guides & documents
Complete your build
The pieces owners run with this one — matched to your build and to each other. Do the whole truck in one order instead of three.
ReadyLIFT 6" Lift Kit With Falcon Shocks FAQs
Is this only for air ride trucks?
Yes. It is for Ram 1500s with factory air ride and 22" wheels. Use the 44-19601 for non-air-ride trucks.
Can I use 18" wheels?
No. 18" wheels cannot be used with this application.
Does it fit the Hurricane engine?
No. It does not work with the 3.0-liter twin-turbo inline-six Hurricane engine.
What tires fit without trimming?
37x12.50 on a 20x9 wheel with 0 offset.
Multi-column

Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!

Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.

Contact Us
Have a question? Just send us an e-mail at support@nvmos.com

























