Prinsu Front-Facing Light Bar Brackets | Rigid 360 Connect
Warranty Information
Vendor warranty summary
Prinsu Design Studio Warranty
At a glance: Limited lifetime on Prinsu-made parts for the original owner; hardware 1 year; powder coat not covered
This is Prinsu Design Studio's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Prinsu-manufactured racks and parts | Limited lifetime (original retail buyer) |
| Hardware kits | 1 year |
| Powder-coat finish | Not covered |
| Missing parts | Report within 90 days of receipt |
| Other brands sold by Prinsu | Original maker's warranty |
- Original purchaser only — coverage does not transfer if you sell it.
- Keep your NVMOS order confirmation — proof of purchase is required.
What's covered
- Defects in materials and workmanship for as long as the original buyer owns the product
- Prinsu decides whether to repair, replace, refund or give store credit
What's not covered
- Powder-coated finish, cosmetic rust and scratches
- Normal wear and tear
- Accidents, racing or competition use, unlawful vehicle use
- Modifications or unauthorized repairs
- Misuse, neglect, overloading, poor installation or maintenance, or not following instructions
- Damage to the vehicle, cargo or other property
How to make a Prinsu Design Studio warranty claim
- Submit the claim through the online form on prinsu.com/warranty (phone claims are not accepted)
- Include a copy of the original invoice
- Wait for an RMA number before shipping
- Ship to the address given with the RMA, with the RMA number clearly on the box; buyer pays return shipping
- Use tracked, insured shipping because Prinsu isn't responsible for loss in transit
Prinsu Design Studio contact: Phone: (866) 522-0697 · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Prinsu Design Studio, and help it along either way.
Shop Prinsu Design Studio at NVMOS
Prinsu Design Studio Pro Roof Rack - Ford Bronco 4-Door Hardtop 2021-2026
5th Gen Toyota 4Runner Prinsu Roof Rack Full Non-Drill | 2010-2024
Ford Bronco Accessory Panel | 2021-2025
See all Prinsu Design Studio products, lead times and FAQs →
Disclaimer: The information on this page describes Prinsu Design Studio's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Prinsu Design Studio official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Prinsu Design Studio builds low-profile Prinsu roof racks in Idaho Falls, Idaho. NVMOS carries Original and Prinsu Pro roof racks, top racks for caps and campers, ladders, rack accessories and mounts, with fitments centered on Toyota and reaching Ford, GM, Ram, Nissan, Subaru, Rivian and the Sprinter.
Based in: Idaho Falls, Idaho · Made in: Built in-house in Idaho Falls · Lead time: Original roof racks ~1 week; Prinsu Pro ~5 weeks; accessories 1–2 weeks
Shop all 188 Prinsu Design StudioWarrantyLead timesAll brands
Warranty terms are set by Prinsu Design Studio, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
These Prinsu front-facing brackets put a Rigid 360 Connect light bar in front of the wind deflector on a Prinsu rack for the 3rd Gen Toyota Sequoia or 4th Gen Toyota 4Runner. Prinsu designs and builds them in Idaho Falls, Idaho, to fit its own racks, so the holes and hardware line up without guesswork.
Why it works
- Mounts the Rigid 360 Connect bar ahead of the wind deflector
- Works with Prinsu Pro and Original roof racks
- Aluminum construction with a low-profile look
- Bolts on using existing rack hardware plus the included parts
Fitment
3rd Gen Toyota Sequoia and 4th Gen Toyota 4Runner. Choose your vehicle and rack type (Pro or Original) in the options.
Lead time
Prinsu accessories currently run about 1–2 weeks to build. Lead times are estimates and change; see current lead times.
Warranty
Covered by the Prinsu Design Studio warranty. See everything we carry from Prinsu Design Studio.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text us at (920) 249-7744.
Complete your Toyota 4Runner build
More parts that fit your Toyota 4Runner and pair well with this one — matched and ready to install.
More for your Toyota 4Runner
Picked from the 1846 parts we carry for the Toyota 4Runner. Check the years and trim in each title — or call us and we’ll confirm fit.
Specifications
Prinsu Front-Facing Light Bar Brackets | Rigid 360 Connect FAQs
How long until it ships?
Prinsu accessories currently run about 1–2 weeks to build. Lead times are estimates and change; see current lead times.
What warranty does it have?
It is covered by the Prinsu Design Studio limited lifetime warranty for the original owner; powder coat is not covered.
Multi-column

Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!

Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.

Contact Us
Have a question? Just send us an e-mail at support@nvmos.com



















