Mounting Kit for Billet D-Rings

Charvonia Design Mounting Kit for Billet D-Rings

Add secure cargo anchor points where your truck needs them most with the Charvonia Design Mounting Kit for Billet D-Rings. This universal mounting kit is designed for truck owners who want to install Charvonia Design Billet D-Rings on the floor or side of a truck bed, especially when factory D-ring mounting points are missing or when extra tie-down locations are needed. :contentReference[oaicite:1]{index=1}

If your truck did not come equipped with factory D-ring mounting points, or you simply want more cargo anchor options, this Charvonia Design D-ring mounting kit makes it easy to add them. The kit uses reinforced mounting plates installed under the bed after drilling two 5/16-inch holes, creating a strong and dependable base for your billet D-rings. :contentReference[oaicite:2]{index=2}

Universal Mounting Kit for Charvonia Design Billet D-Rings

Charvonia Design Mounting Kit for Billet D-Rings is listed as a universal application, making it a flexible solution for a wide range of truck bed and custom cargo anchor installations. It is specifically intended to add two Billet D-Rings to the floor or side of your truck bed. :contentReference[oaicite:3]{index=3}

Perfect for Adding Missing Tie-Down Points

This kit is ideal if your truck did not come with factory D-ring mounting points or if you want to create additional secure cargo anchor locations for better load control. The page specifically calls out use cases like securing a dirt bike, motorcycle, overland gear, or other work and recreation cargo. :contentReference[oaicite:4]{index=4}

Heavy-Duty Mounting Hardware Built for Strength

One of the biggest advantages of this Charvonia Design billet D-ring mounting kit is its hardware strength. The live page states that the included Grade 10.9 mounting bolts far exceed stock hardware, and the reinforced mounting plates are made from thick steel and powdercoated for corrosion resistance. :contentReference[oaicite:5]{index=5}

Includes Reinforced Mounting Plates for Stronger Installs

Each kit includes reinforced plates that install beneath the bed surface to provide a stronger foundation for your billet D-rings. This helps create a more secure tie-down point than thin sheet metal alone could offer. That added strength is especially valuable when securing heavier loads. This last sentence is an inference based on the reinforced plate design and stated heavy-duty purpose. :contentReference[oaicite:6]{index=6}

Easy One-Person Installation

Charvonia Design Mounting Kit for Billet D-Rings is designed for a quick, DIY-friendly install. The page states that it takes about 15 minutes to install both D-rings and that one person can complete the install thanks to the included VHB double-sided tape, which holds the mounting plates under the bed while the D-rings are bolted in from the top. :contentReference[oaicite:7]{index=7}

Drill and Bolt-In Installation

Installation requires drilling two 5/16-inch mounting holes wherever you want to add your billet D-rings. This makes the kit a practical solution for custom tie-down placement, whether you want anchor points on the bed floor, side walls, or another suitable flat mounting area. :contentReference[oaicite:8]{index=8}

What’s Included

Each Charvonia Design Mounting Kit for Billet D-Rings includes:

• Two 3" x 1" reinforced mounting plates with VHB adhesive for one-person install
• Two Grade 10.9 Torx shoulder bolts
• Stainless steel flat washers
• Plastic crush washers

This kit provides the hardware needed to mount one pair of billet D-rings in a universal application. :contentReference[oaicite:9]{index=9}

Tools Required for Installation

• T45 Torx bit
• Torque wrench
• Center punch
• Drill with 1/8" and 5/16" drill bits
• Isopropyl alcohol or other mild solvent
• Light grease, such as white lithium grease

Having these tools ready will help make installation smoother and more accurate. :contentReference[oaicite:10]{index=10}

Designed and Manufactured in the USA

Charvonia Design Mounting Kit for Billet D-Rings is proudly designed and manufactured in the USA, giving truck owners a premium American-made mounting solution for adding billet cargo anchors wherever they are needed. :contentReference[oaicite:11]{index=11}

Why Choose the Charvonia Design Mounting Kit for Billet D-Rings?

• Universal application for custom truck bed D-ring installs
• Adds missing tie-down points or extra cargo anchor locations
• Designed for Charvonia Design Billet D-Rings
• Includes reinforced steel mounting plates
• Includes Grade 10.9 Torx shoulder bolts
• VHB adhesive supports easy one-person installation
• Ideal for mounting D-rings to the bed floor or side wall
• Designed and manufactured in the USA

Add More Cargo Anchor Points with Charvonia Design

If you need a reliable way to install Charvonia Design Billet D-Rings where factory tie-down points do not exist, the Charvonia Design Mounting Kit for Billet D-Rings is the right solution. With reinforced mounting plates, Grade 10.9 hardware, VHB-supported one-person installation, and a universal fitment concept, this kit makes it easier to create stronger, better-placed cargo anchor points in your truck bed. :contentReference[oaicite:12]{index=12}