MAXTRAX Universal Mounting Pins for MKII, XTREME and LITE
For qualified buyers at checkout
Secure checkoutEncrypted payment
Warranty Information
Vendor warranty summary
MAXTRAX Warranty
At a glance: Limited lifetime on recovery boards against manufacturing defects; wheel-spin damage not covered
This is MAXTRAX's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Recovery boards (MKII, XTREME, LITE, MINI) | Limited lifetime (manufacturing defects) |
| Storage and mounting components | 12 months (per MAXTRAX Australia policy) |
- Original purchaser only — coverage does not transfer if you sell it.
- Keep your NVMOS order confirmation — proof of purchase is required.
What's covered
- Recovery boards that fail because of a manufacturing defect when used per the MAXTRAX instructions
- Approved claims get a replacement (or refund), usually decided within about 7 business days of inspection
- Freight is refunded for approved claims
What's not covered
- Burned or melted teeth from spinning tires
- Damage from use on rocky or hard surfaces
- Wear and tear, abuse, misuse, or accidental impact
- Not following the Instructions for Use
- Modified boards
- Claims with missing parts or no proof of purchase
- Second-hand boards / anyone other than the original owner
How to make a MAXTRAX warranty claim
- Email sales@maxtraxus.com with proof of purchase, photos/details of the damage, and your vehicle info
- Wait for approval before shipping
- Ship to the address MAXTRAX provides (the policy lists 47 Griffin Crescent, Brendale Queensland 4500, Australia)
- MAXTRAX inspects and replaces approved boards; freight is reimbursed only if the claim is approved
MAXTRAX contact: Phone: 303.706.9700 · Email: sales@maxtraxus.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to MAXTRAX, and help it along either way.
Shop MAXTRAX at NVMOS
See all MAXTRAX products, lead times and FAQs →
Disclaimer: The information on this page describes MAXTRAX's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: MAXTRAX official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
MAXTRAX makes recovery boards in Australia, injection-molded from reinforced nylon. NVMOS carries MKII, XTREME and MINI boards, replacement teeth, mounting pins and recovery rope, for anyone who would rather get unstuck alone than wait for a second truck.
Based in: Australia · Made in: Australia · Founded: 2005 · Lead time: In-stock ships in 24–48 hrs
Shop all 43 MAXTRAXWarrantyAll brands
Warranty terms are set by MAXTRAX, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
MAXTRAX Universal Mounting Pins for MKII, XTREME and LITE
MAXTRAX used to sell different mounting pins for different boards, which made it awkward to mix MKII and XTREME on the same rack. The Universal Mounting Pins replace six earlier pin options with one modular system that works across MKII, XTREME and LITE.
What you choose is the length of the M8 threaded stud, based on how and where you are mounting the boards.
| Spec | Detail |
|---|---|
| Fits | MAXTRAX MKII, XTREME and LITE |
| Thread | M8 threaded stud |
| Stud length options | 17 mm (brackets and racks) or 40 mm (custom and through-panel mounts) |
| Capacity | Short pins hold 2 boards; long pins hold up to 4 MKII, LITE or XTREME |
| Configurations | 4 x MKII, 4 x XTREME, 2 + 2, or LITE |
| LITE note | Run LITE as its own setup; do not mix it in a stack with other boards |
Which stud length do I need?
Choose 17 mm for roof racks, bed racks, spare tire mounts and mounting brackets. Choose 40 mm for custom or hard-mounted installs that need more thread, like mounting through a camper wall.
Can I mount MKII and XTREME boards together?
Yes. The pins work with both, so you can run two MKII and two XTREME on the same set.
Do they work with MAXTRAX LITE?
Yes, but LITE boards are shorter, so run them as their own setup rather than mixing them into a stack with other boards.
Do these replace the old MKII and XTREME pins?
Yes. MAXTRAX designed them to replace the six earlier pin options with one system.
MAXTRAX Universal Mounting Pins for MKII, XTREME and LITE FAQs
Which MAXTRAX boards do the Universal Mounting Pins work with?
They work across the entire MAXTRAX range, including MKII, XTREME and LITE recovery boards.
What problem do they solve?
Previously you had to pick a pin based on the boards you owned, because MKII and LITE needed a different solution from XTREME. The universal pins standardize the system.
How do I choose the right pin?
You choose the length of the M8 threaded stud that fits your application.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
