MAXTRAX Flat Rack Mount
For qualified buyers at checkout
Secure checkoutEncrypted payment
Warranty Information
Vendor warranty summary
MAXTRAX Warranty
At a glance: Limited lifetime on recovery boards against manufacturing defects; wheel-spin damage not covered
This is MAXTRAX's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Recovery boards (MKII, XTREME, LITE, MINI) | Limited lifetime (manufacturing defects) |
| Storage and mounting components | 12 months (per MAXTRAX Australia policy) |
- Original purchaser only — coverage does not transfer if you sell it.
- Keep your NVMOS order confirmation — proof of purchase is required.
What's covered
- Recovery boards that fail because of a manufacturing defect when used per the MAXTRAX instructions
- Approved claims get a replacement (or refund), usually decided within about 7 business days of inspection
- Freight is refunded for approved claims
What's not covered
- Burned or melted teeth from spinning tires
- Damage from use on rocky or hard surfaces
- Wear and tear, abuse, misuse, or accidental impact
- Not following the Instructions for Use
- Modified boards
- Claims with missing parts or no proof of purchase
- Second-hand boards / anyone other than the original owner
How to make a MAXTRAX warranty claim
- Email sales@maxtraxus.com with proof of purchase, photos/details of the damage, and your vehicle info
- Wait for approval before shipping
- Ship to the address MAXTRAX provides (the policy lists 47 Griffin Crescent, Brendale Queensland 4500, Australia)
- MAXTRAX inspects and replaces approved boards; freight is reimbursed only if the claim is approved
MAXTRAX contact: Phone: 303.706.9700 · Email: sales@maxtraxus.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to MAXTRAX, and help it along either way.
Shop MAXTRAX at NVMOS
See all MAXTRAX products, lead times and FAQs →
Disclaimer: The information on this page describes MAXTRAX's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: MAXTRAX official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
MAXTRAX makes recovery boards in Australia, injection-molded from reinforced nylon. NVMOS carries MKII, XTREME and MINI boards, replacement teeth, mounting pins and recovery rope, for anyone who would rather get unstuck alone than wait for a second truck.
Based in: Australia · Made in: Australia · Founded: 2005 · Lead time: In-stock ships in 24–48 hrs
Shop all 43 MAXTRAXWarrantyAll brands
Warranty terms are set by MAXTRAX, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
MAXTRAX Flat Rack Mount
The Flat Rack Mount bolts MAXTRAX boards flat to a roof platform or to crossbars. Its brackets give 180 mm of adjustment either side of the mounting point, so you can line the pins up with your board keyholes without drilling the rack.
It comes in two hardware versions: channel nuts for slotted platforms, or stainless T-bolts for most other platforms and crossbars. A set of 17 mm mounting pins is included.
| Spec | Detail |
|---|---|
| Adjustment | 180 mm closer or 180 mm further apart from the mounting point |
| Board compatibility | MAXTRAX MKII, LITE, XTREME and Mini |
| Channel nut kit | 2 x brackets, 4 x channel nuts with stainless flat washers, spring washers and bolts, 1 x set of 17 mm mounting pins |
| T-bolt kit | 2 x brackets, 4 x stainless M8 T-bolts with flat washers and Nyloc nuts, 1 x set of 17 mm mounting pins |
| Bracket material | Glass-filled nylon |
| Hardware | Stainless steel |
| Channel nut size | 40 x 20 x 10 mm |
| T-bolt size | M8 x 20 mm |
| Front Runner Slimline / Slimsport | Requires 4 x M8 bolts, not included |
Will it fit my roof rack?
The channel nut version suits Rhino-Rack Pioneer and Yakima LockNLoad platforms. The T-bolt version suits Rola Titan and the platforms and crossbars of most popular brands. Other racks may need extra hardware from a roof rack supplier.
Does it work with a Front Runner Slimline or Slimsport platform?
Yes, but those platforms need 4 x M8 bolts, which are not included.
Are mounting pins included?
Yes. Each kit includes a set of 17 mm mounting pins.
How much adjustment do I get?
180 mm closer or 180 mm further apart from the platform mounting point.
MAXTRAX Flat Rack Mount FAQs
How much adjustment does the MAXTRAX Flat Rack Mount give?
It provides 180mm of closer adjustment or 180mm of further apart adjustment from the mounting point of the Flat Racks.
Will it fit a Front Runner roof platform?
The Front Runner Slimline and Slimsport Roof Platform require 4 x M8 bolts.
Do I need extra hardware for other roof racks?
Other roof rack brands may require extra mounting hardware from a roof rack supplier.
What is it used for?
It stores MAXTRAX recovery boards on your vehicle or rack.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
