In-stock parts ship in 24–48 hours · Questions? Real humans: (920) 249-7744

Shop by Vehicle Pick your rig and see everything that fits
1
2
3
Browse popular rigs & all vehicles Hide vehicles
SKU: 7387

KC HiLiTES Power Distribution Plate for Toyota Land Cruiser & 4Runner Hybrid

$139.99

180-Day ReturnsOn uninstalled, unused parts Real humans who wheel(920) 249-7744 Financing availableAffirmPayPal CreditFor qualified buyers at checkout Secure checkoutEncrypted payment
Confirmed fit: Toyota 4Runner
Verified to fit the Toyota 4Runner.
Warranty Information

Vendor warranty summary

KC HiLiTES Warranty

At a glance: KC Adventure Further Unlimited Lifetime Warranty — transferable, register within 60 days (purchases after Aug 31, 2025)

This is KC HiLiTES's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.

Coverage by product

Product or component Coverage
Eligible KC products bought after August 31, 2025 Unlimited lifetime (repair or replace)
Solar panels, flashlights, older halogen models Modified coverage (KC does not publish the specific terms)
Products bought on or before August 31, 2025 Prior KC Adventure Further Guarantee (effective March 31, 2021): lifetime on mechanical parts, 5 years electrical, 1 year halogen bulbs, 1 year finish
  • Coverage can transfer to a later owner.

What's covered

  • Any eligible product that fails or gets damaged under normal use is repaired or replaced
  • Coverage carries over to later owners (fully transferable)
  • Applies to purchases from kchilites.com, by phone, from authorized dealers, or at KC's Flagstaff location
  • Once registered, no receipt is needed for a claim

What's not covered

  • Theft or loss
  • Cosmetic damage that does not affect how the product works, or deliberate damage
  • Misuse, neglect, or improper installation
  • Extreme conditions such as fire, flood, or severe impact
  • Normal wear and tear

How to make a KC HiLiTES warranty claim

  • Register the product within 60 days of purchase at https://support.kchilites.com/hc/en-us/requests/new
  • If something goes wrong, open a warranty claim at https://www.kchilites.com/help/returns/form
  • Wait for RMA approval from KC
  • Ship the product back with the RMA
  • KC repairs or replaces it

KC HiLiTES contact: Phone: (888) 689-5955 · Claim page / support

Bought it from NVMOS? Start with us.

Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to KC HiLiTES, and help it along either way.

Shop KC HiLiTES at NVMOS

See all KC HiLiTES products, lead times and FAQs →

Disclaimer: The information on this page describes KC HiLiTES's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: KC HiLiTES official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.

About the brand

KC HiLiTES

KC HiLiTES has built off-road lights since 1970 and is still family-run in Flagstaff, Arizona. NVMOS carries KC light bars, pods, fog and ditch lights, rock lights, wiring and Platform One roof racks for Jeep, Toyota, Ford, Ram, Chevy/GMC and more. For anyone who wants to see the trail before they're on it.

Based in: Flagstaff, Arizona · Founded: 1970 · Lead time: In-stock items ship in 24–48 hours

KC HiLiTES warranty: KC Adventure Further Unlimited Lifetime Warranty — transferable, register within 60 days (purchases after Aug 31, 2025). Read the full summary

Warranty terms are set by KC HiLiTES, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.


KC HiLiTES Power Distribution Plate for Toyota Land Cruiser & 4Runner Hybrid

This stainless steel plate gives hybrid Toyotas a place under the hood to tie in accessory power and ground. It is made for the 2024-2025 Land Cruiser 250 and the 2025 4Runner hybrid by KC HiLiTES.

The hybrid battery sits in the rear cargo area, so the plate adds power and ground lugs up front. That cuts the wiring that has to run the length of the vehicle for light bars, winches and air compressors. It mounts at factory locations with no drilling. See Toyota Land Cruiser parts for more.

Why it works
Front power and groundDedicated lugs connected to the rear hybrid battery.
Room to expandOptimized layout for relays, bus bars and fuse blocks.
Factory mountingUses factory locations, with no drilling required.
What's included
  • (1) Power distribution plate
  • (2) Power distribution lugs (red +, black -)
  • (4) Oval edge gaskets
  • Mounting hardware
Fitment

2024-2025 Toyota Land Cruiser (250 Series) and 2025 Toyota 4Runner, hybrid models with the rear battery only.

Finish the whole truck in one order

Complete your Toyota 4Runner build

The pieces owners run with this one — matched to your Toyota 4Runner and to each other. Do the whole truck in one order instead of three.

KC HiLiTES Power Distribution Plate for Toyota Land Cruiser & 4Runner Hybrid (this item) What you’re viewing $139.99
✓ ORACLE Lighting 2006-2009 Toyota 4-Runner Pre-Assembled Halo Headlights-Non HID Finish $979.99
✓ Rago Roof Rack 22" x 9.7" Decking Panels Finish $229.95
Build total (1 items)
$139.99
The complete look for your Toyota 4Runner.
Set any options above, then add them all in one click — one checkout, one shipment.
Everything else that fits this truck

More for your Toyota 4Runner

Picked from the 1519 parts we carry for the Toyota 4Runner. Check the years and trim in each title — or call us and we’ll confirm fit.

Fits
Shop all 1519 parts for your Toyota 4Runner →

Specifications

  • Part number: 7387
  • Material: stainless steel
  • Vehicle fit: 2024-2025 Toyota Land Cruiser 250 hybrid; 2025 Toyota 4Runner hybrid (rear battery only)
  • Mounting: factory locations, no drilling
  • In the box: (1) plate, (2) power distribution lugs (red +, black -), (4) oval edge gaskets, mounting hardware
  • Pairs with: KC Universal Power Cable Kit (6326), Universal 5-Relay Mounting Plate (7386)

KC HiLiTES Power Distribution Plate for Toyota Land Cruiser & 4Runner Hybrid FAQs

Which vehicles does it fit?

The 2024-2025 Toyota Land Cruiser (250 Series) and the 2025 Toyota 4Runner, rear-battery hybrid models only.

Does it work on non-hybrid trucks?

No. It is optimized for the rear-battery hybrid models only.

What goes with it?

It pairs with KC's Universal 5-Relay Mounting Plate (SKU 7386) and works with the toggle switch for the KC Cyclone Underhood Kit (SKU 355).

Is drilling required?

No. It mounts using factory locations.

Multi-column

Minimalist icon of three people for social, community, or group activities
Join Our Community

For all things NVMOS, check us out on Instagram and Facebook!

Simple black and white credit card icon for payment or checkout options
Financing Available

Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.

black and white envelope mail icon for email or newsletter sign up
Contact Us

Have a question? Just send us an e-mail at support@nvmos.com