Bed Tie-Down Anchors for Ford F-250 / F-350 (PAIR)
Warranty Information
Vendor warranty summary
Charvonia Design Warranty
At a glance: Lifetime on materials and workmanship, 1 year on finishes
This is Charvonia Design's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Tie-down anchors and other products (materials and workmanship) | Lifetime of the product from retail purchase |
| All finishes | 1 year |
- Original purchaser only — coverage does not transfer if you sell it.
- Keep your NVMOS order confirmation — proof of purchase is required.
What's covered
- Defects in materials and workmanship on new, unused products
- Charvonia repairs or replaces the defective part at its discretion
What's not covered
- Misuse, abuse, negligence, accidents and normal wear
- Used products
- Parts that were repaired, altered or modified
- Use with non-genuine parts
- Labor costs or other damages
- Products bought from unauthorized sellers (e.g. eBay, Amazon) may not be covered
How to make a Charvonia Design warranty claim
- Contact Charvonia Design through the website contact form (email is their preferred channel)
- Provide proof of purchase
- Get an RMA number before sending anything
- Ship the item prepaid to Charvonia Design in Huntersville, NC
Charvonia Design contact: Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Charvonia Design, and help it along either way.
Shop Charvonia Design at NVMOS
See all Charvonia Design products, lead times and FAQs →
Disclaimer: The information on this page describes Charvonia Design's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Charvonia Design official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Charvonia Design machines billet aluminum tie-down anchors in North Carolina. NVMOS carries their vehicle-specific bed anchors, rail tie-downs, D-ring kits and battery tie-downs for Toyota, Ford, Ram, GM, Nissan and Jeep trucks, built for people who haul often and want anchors stronger than the factory pieces.
Based in: North Carolina · Made in: USA (North Carolina) · Founded: 2015 · Lead time: In-stock items ship in 24–48 hours
Shop all 28 Charvonia DesignWarrantyAll brands
Warranty terms are set by Charvonia Design, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
Charvonia Design Ford F-250 and F-350 Bed Tie-Down Anchors (Pair)
Upgrade your truck bed cargo control with Charvonia Design Ford F-250 and F-350 Bed Tie-Down Anchors. Built specifically for Ford Super Duty F-250 and F-350 trucks, these billet tie-down anchors deliver stronger, cleaner, and more dependable cargo anchor points than worn factory steel tie-downs. Whether you use your truck for work, towing, tools, equipment, camping gear, or everyday hauling, these Ford F-250 / F-350 bed tie-down anchors help secure cargo while giving your truck bed a more premium finished look.
Sold as a pair, these Charvonia Design billet tie-down anchors are precision machined, powdercoated, and engraved with the Charvonia Design logo and torque specifications. They are designed to replace scratched and rusty stock steel tie-down points while adding a sleek, low-profile finishing touch to your truck bed.
Designed for Ford Super Duty F-250 and F-350 Fitment
These Charvonia Design Ford bed tie-down anchors are designed for 1999-2026 Ford Super Duty F-250 and F-350 applications. The product page also notes that the truck uses two pairs, or four bed tie-down anchors, for full bed coverage.
Built Specifically for Super Duty Truck Beds
Charvonia Design engineered these anchors for precise fitment and dependable real-world truck use, making them a strong upgrade for truck owners who want better cargo security and a more refined look.
Machined from 6061-T6 Aluminum
Charvonia Design Ford F-250 and F-350 bed tie-down anchors are machined from high-grade 6061-T6 aluminum for excellent strength, durability, and corrosion resistance. The anchors are powdercoated for added protection and engraved with the logo and torque spec for a premium finished appearance.
Available Corrosion-Resistant Finish Options
- Red Textured Powdercoat
- Black Textured Powdercoat
- Blue Textured Powdercoat
- Silver Textured Powdercoat
These finish options let you match your truck bed hardware to the rest of your build while maintaining long-term protection and a clean custom look.
Sleek Low-Profile Design for Better Truck Bed Utility
These Charvonia Design Super Duty tie-down anchors feature a sleek, low-profile design that serves as both a practical cargo anchor point and a premium finishing detail. The product page highlights them as a strong replacement for scratched and rusty stock steel tie-down points.
Compatible with Bed Accessories
The product page also emphasizes seamless compatibility with many truck bed accessories, helping preserve a clean, polished look while keeping secure tie-down points in place.
Easy Installation with Included Grade 8.8 Hardware
Charvonia Design Ford F-250 and F-350 Bed Tie-Down Anchors are designed for straightforward installation. The page notes that you use a T40 Torx to remove the stock bolts and an M6 hex bit to install the new anchors. Each pair includes corrosion-resistant Grade 8.8 mounting hardware for a secure and worry-free install.
Covers Minor Bedliner Disruption
If your truck has a spray-in bedliner, the product FAQ notes that the factory tie-down anchors can still be removed by carefully cutting around the edge and clearing the Torx head. Because the new billet anchors are wider than the factory units, they will normally cover any missing bedliner after installation.
Designed and Manufactured in the USA
Charvonia Design Ford F-250 and F-350 bed tie-down anchors are proudly designed and manufactured in the USA. The product page also notes that the design is protected under US Patent D1017513.
Why Choose Charvonia Design Ford F-250 / F-350 Bed Tie-Down Anchors?
- Fits 1999-2026 Ford Super Duty F-250 and F-350
- Sold as a pair
- Truck uses two pairs for full bed coverage
- Machined from 6061-T6 aluminum
- Powdercoated and engraved with logo and torque spec
- Available in multiple corrosion-resistant finishes
- Sleek low-profile design
- Includes corrosion-resistant Grade 8.8 mounting hardware
- Simple installation with a T40 Torx and M6 hex bit
- Designed and manufactured in the USA
- Patented design protected by US Patent D1017513
Upgrade Your Super Duty with Charvonia Design Bed Tie-Down Anchors
If you want stronger, cleaner, and more dependable cargo anchor points for your truck, Charvonia Design Ford F-250 and F-350 Bed Tie-Down Anchors are a premium upgrade. With 6061-T6 billet aluminum construction, corrosion-resistant Grade 8.8 hardware, a low-profile design, and USA-made quality, these anchors help turn your Super Duty truck bed into a more secure and more polished hauling setup.
Complete your Super Duty build
More parts that fit your Super Duty and pair well with this one — matched and ready to install.
$106.99
$39.99
$59.99
$79.99
$59.99
More for your Ford Super Duty
Picked from the 1021 parts we carry for the Ford Super Duty. Check the years and trim in each title — or call us and we’ll confirm fit.
Bed Tie-Down Anchors for Ford F-250 / F-350 (PAIR) FAQs
Which Ford trucks do these bed tie-down anchors fit?
They are designed for 1999-2026 Ford Super Duty F-250 and F-350 trucks.
How many anchors come in a pair, and how many does my truck need?
The product is sold as a pair. The listing notes the truck uses two pairs, or four anchors, for full bed coverage.
What tools do I need to install them?
A T40 Torx to remove the stock bolts and an M6 hex bit to install the new anchors. Grade 8.8 mounting hardware is included with each pair.
What are they made of and what finishes are offered?
They are machined from 6061-T6 aluminum and powdercoated. Finishes are red, black, blue or silver textured.
Will they work with a spray-in bedliner?
The factory anchors can still be removed by carefully cutting around the edge. The billet anchors are wider than stock, so they normally cover any missing bedliner.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
