Backing Plates for Ford Bed Tie Downs (PAIR)
Warranty Information
Vendor warranty summary
Charvonia Design Warranty
At a glance: Lifetime on materials and workmanship, 1 year on finishes
This is Charvonia Design's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Tie-down anchors and other products (materials and workmanship) | Lifetime of the product from retail purchase |
| All finishes | 1 year |
- Original purchaser only — coverage does not transfer if you sell it.
- Keep your NVMOS order confirmation — proof of purchase is required.
What's covered
- Defects in materials and workmanship on new, unused products
- Charvonia repairs or replaces the defective part at its discretion
What's not covered
- Misuse, abuse, negligence, accidents and normal wear
- Used products
- Parts that were repaired, altered or modified
- Use with non-genuine parts
- Labor costs or other damages
- Products bought from unauthorized sellers (e.g. eBay, Amazon) may not be covered
How to make a Charvonia Design warranty claim
- Contact Charvonia Design through the website contact form (email is their preferred channel)
- Provide proof of purchase
- Get an RMA number before sending anything
- Ship the item prepaid to Charvonia Design in Huntersville, NC
Charvonia Design contact: Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Charvonia Design, and help it along either way.
Shop Charvonia Design at NVMOS
See all Charvonia Design products, lead times and FAQs →
Disclaimer: The information on this page describes Charvonia Design's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Charvonia Design official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Charvonia Design machines billet aluminum tie-down anchors in North Carolina. NVMOS carries their vehicle-specific bed anchors, rail tie-downs, D-ring kits and battery tie-downs for Toyota, Ford, Ram, GM, Nissan and Jeep trucks, built for people who haul often and want anchors stronger than the factory pieces.
Based in: North Carolina · Made in: USA (North Carolina) · Founded: 2015 · Lead time: In-stock items ship in 24–48 hours
Shop all 28 Charvonia DesignWarrantyAll brands
Warranty terms are set by Charvonia Design, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
Charvonia Design Backing Plates for Ford Bed Tie Downs
Finish your installation the right way with Charvonia Design Backing Plates for Ford Bed Tie Downs. These backing plates are designed to create a cleaner, more finished look when upgrading your Ford truck with Charvonia Design billet tie downs.
Because Ford applied the factory bedliner over the stock tie downs, removing the factory anchors can leave visible paint underneath. These backing plates install between the truck bed and your new Charvonia Design Billet Tie Downs to help cover that exposed area and improve the final appearance of your truck bed.
Designed for Ford Truck Applications
These Charvonia Design Ford backing plates are available for the following truck applications:
- Ford F-150
- Ford Raptor
- Ford Super Duty
Built for Charvonia Design Billet Tie Down Installs
These backing plates are intended to be used with new Charvonia Design Billet Tie Downs, helping complete the install with a cleaner, more OEM-like finish.
Sold as a Pair
Each set of Charvonia Design Ford Bed Tie Down Backing Plates is sold in pairs, making them ideal for finishing two tie down mounting locations.
Texture Black Powdercoat Finish
These backing plates feature a durable texture black powdercoat finish that blends well with modern truck beds and tie down hardware while maintaining a rugged, purpose-built appearance.
Why Choose Charvonia Design Ford Backing Plates?
Covers Exposed Paint After Factory Tie Down Removal
Removing the factory Ford tie downs can reveal unfinished areas beneath the sprayed-in bedliner. These backing plates help cover that space for a much cleaner final result.
Improves the Finished Look of Your Truck Bed
Small details matter, especially on premium truck upgrades. These Charvonia Design backing plates help make your tie down install look more complete and intentional.
Vehicle-Specific Ford Options
Available for F-150 / Raptor and Super Duty applications, these are a better-looking and more tailored solution than generic spacers or trim pieces.
Complete Your Ford Tie Down Install with Charvonia Design
If you are upgrading your Ford truck with new tie down anchors, Charvonia Design Backing Plates for Ford Bed Tie Downs are the finishing touch that helps your install look clean, professional, and complete.
Backing Plates for Ford Bed Tie Downs (PAIR) FAQs
Which Ford trucks do these backing plates fit?
They are available for the Ford F-150, Raptor and Super Duty.
What are they for?
They install between the truck bed and your Charvonia Design Billet Tie Downs to cover exposed paint left after removing the factory anchors.
Are they sold as a pair, and what is the finish?
Yes, sold as a pair, with a textured black powdercoat finish.
Can I use them without Charvonia tie downs?
They are intended for use with new Charvonia Design Billet Tie Downs.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
