Hi-Lite Overland Toyota 4Runner Front Bumper 5th Gen (2010-2024) [PreRunner Bull Bar]
Warranty Information
Vendor warranty summary
Backwoods Adventure Mods Warranty
At a glance: Lifetime structural warranty to the original purchaser; 60 days on powder coat
This is Backwoods Adventure Mods's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 16, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Product structure (bumpers, racks, armor) | Lifetime, original purchaser |
| Powder coat | 60 days |
- Original purchaser only — coverage does not transfer if you sell it.
- Keep your NVMOS order confirmation — proof of purchase is required.
What's covered
- Defects in materials and craftsmanship in the product structure under normal, proper use
- Powder coat defects within 60 days
- Backwoods repairs or replaces at its discretion after inspecting the product, at no added cost if approved
What's not covered
- Improper installation or alterations
- Abuse, neglect or accidents
- Corrosion and normal wear and tear
- Freight, labor, installation costs, incidental damages or vehicle downtime
How to make a Backwoods Adventure Mods warranty claim
- Send a written description of the damage and how it happened
- Include a copy of the original purchase invoice
- Make the product available for Backwoods to inspect
- If approved, Backwoods repairs or replaces within a reasonable time
Backwoods Adventure Mods contact: Phone: 479.365.6700 · Email: info@backwoodsadventuremods.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Backwoods Adventure Mods, and help it along either way.
Shop Backwoods Adventure Mods at NVMOS
![Backwoods Hi-Lite Overland Toyota Tacoma Front Bumper 4th Gen (2024-2026) [Bull Bar]](https://cdn.shopify.com/s/files/1/0861/5113/5535/files/4th-gen-tacoma-front-bumper-with-bull-bar.webp?v=1774801821&width=400)
Backwoods Hi-Lite Overland Toyota Tacoma Front Bumper 4th Gen (2024-2026) [Bull Bar]
Backwoods DRIFTR Toyota Tacoma Roof Rack (2024-2026)
Backwoods Toyota 5th Gen 4Runner Rock Sliders (2010-2024)
See all Backwoods Adventure Mods products, lead times and FAQs →
Disclaimer: The information on this page describes Backwoods Adventure Mods's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Backwoods Adventure Mods official warranty information. Last updated on nvmos.com: October 16, 2026. See our return policy for NVMOS's own terms.
About the brand
Backwoods Adventure Mods designs and builds bumpers, rock sliders, skid plates and racks in Springdale, Arkansas, for the Toyota Tacoma, 4Runner, Tundra and Land Cruiser 250, the Lexus GX550 and the Jeep Gladiator. Its Hi-Lite Overland hybrid bumpers put an aluminum shell over a steel winch plate and use steel recovery points, so you shed weight without trusting a recovery to aluminum. DRIFTR roof racks and overland bed racks cover...
Based in: Springdale, Arkansas · Brand since: 2017 · Built: In-house, in batch production runs · Lead time: In-stock items typically ship in 1–2 business days; out-of-stock items join the next batch build
Shop all 72 Backwoods Adventure ModsWarrantyAll brands
Warranty terms are set by Backwoods Adventure Mods, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
The Hi-Lite Overland is Backwoods Adventure Mods' true hybrid front bumper for the 2010–2024 5th Gen Toyota 4Runner — with a PreRunner-style bull bar. "Hybrid" here means steel and aluminum, not one or the other: a 30 lb aluminum outer shell over a 55 lb steel winch plate and recovery points, for 85 lb total.
The steel carries the winch and recovery loads, tied directly to the frame rather than the bumper skin, and the aluminum keeps weight down where the truck does not need steel. Backwoods designed and builds it in the USA.
Why it works
- Hybrid steel and aluminum — 30 lb shell + 55 lb steel = 85 lb.
- Winch-ready for up to a 12,000 lb winch, with hand cutouts for winch access and spool visibility.
- Steel recovery points tied to the frame, not the bumper.
- Light cutouts for most aftermarket pod lights and a flat top for a 30" light bar.
- PreRunner-style bull bar.
- High-clearance design. Black powder coat included.
Fitment and compatibility
- All 5th Gen 4Runners, 2010–2024, including 2010–2013 pre-facelift and Limited models.
- Works with factory TSS; if your truck has the factory forward-facing camera, the TSS has to be relocated.
- Compatible with the TRD skid plate when the connector skid is not used.
- Accepts all hawse fairleads and most roller fairleads; some roller fairleads are too large for the recessed opening.
- Not compatible with factory fog lights or the Rago Fabrication Aqua Tank washer reservoir.
Winch notes
Most winches fit without changes. If the winch is taller than 10.1", plan on relocating the solenoid or slightly modifying the crossmember — WARN ZEON winches (10.5" tall) fall in that group. The winch can be mounted to the truck separately from the bumper. Backwoods considers its front bumper support brackets a must if you plan to winch.
Install notes
The bumper installs in two separate pieces, which is why Backwoods calls it a one-person install. Install and spec videos:
- 4Runner Hi-Lite front bumper install video
- Hi-Lite 4Runner bumper specs and features video
- Backwoods installation instructions page
In the box
- Aluminum outer shell
- Steel winch plate with frame-tied recovery points
- Grade 8 hardware
- Black powder coat finish
- Winch, lights, support brackets and connector skid sold separately
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text Carl & Anton at (920) 249-7744 or use the chat — real humans in Sheboygan, Wisconsin, not a call center.
Complete your Toyota 4Runner build
More parts that fit your Toyota 4Runner and pair well with this one — matched and ready to install.
$2,250.00
$1,299.00
$1,649.00
$1,299.00
$169.00
More for your Toyota 4Runner
Picked from the 1251 parts we carry for the Toyota 4Runner, matched to 2010–2024 model years. Check the years and trim in each title — or call us and we’ll confirm fit.
Specifications
Hi-Lite Overland Toyota 4Runner Front Bumper 5th Gen (2010-2024) [PreRunner Bull Bar] FAQs
Will it fit my 4Runner?
It fits all 2010-2024 5th Gen 4Runners, including 2010-2013 pre-facelift and Limited models. It does not work with factory fog lights.
What winch can I run?
Up to a 12,000 lb winch. Winches taller than 10.1 inches, such as the 10.5-inch WARN ZEON, need the solenoid relocated or a slight crossmember modification.
Does it work with TSS and the TRD skid?
Yes to factory TSS, though it must be relocated if your truck has the factory forward-facing camera. The TRD skid plate works when you do not run the Backwoods connector skid.
Do I need the support brackets?
Backwoods calls them a must-have if you plan to winch. They tie the factory bumper mounts into the sway bar mounts to spread the load.
How heavy is it?
85 lb total: a 30 lb aluminum shell and 55 lb of steel. Questions? Call the real humans at NVMOS, (920) 249-7744.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Buy now, pay later with PayPal Credit — available at checkout.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
