In-stock parts ship in 24–48 hours · Questions? Real humans: (920) 249-7744

Shop by Vehicle Pick your rig and see everything that fits
1
2
3
Browse popular rigs & all vehicles Hide vehicles
SKU: BWT4R5-8920

Toyota 4Runner 5th Gen (2010-2024) Front Bumper Support Brackets

$175.00

180-Day ReturnsOn uninstalled, unused parts Real humans who wheel(920) 249-7744 PayPal Credit acceptedFinancing option at checkout Secure checkoutEncrypted payment
Confirmed fit: 2010–2024 Toyota 4Runner
Verified to fit the 2010–2024 Toyota 4Runner.
Warranty Information

Vendor warranty summary

Backwoods Adventure Mods Warranty

At a glance: Lifetime structural warranty to the original purchaser; 60 days on powder coat

This is Backwoods Adventure Mods's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 16, 2026.

Coverage by product

Product or component Coverage
Product structure (bumpers, racks, armor) Lifetime, original purchaser
Powder coat 60 days
  • Original purchaser only — coverage does not transfer if you sell it.
  • Keep your NVMOS order confirmation — proof of purchase is required.

What's covered

  • Defects in materials and craftsmanship in the product structure under normal, proper use
  • Powder coat defects within 60 days
  • Backwoods repairs or replaces at its discretion after inspecting the product, at no added cost if approved

What's not covered

  • Improper installation or alterations
  • Abuse, neglect or accidents
  • Corrosion and normal wear and tear
  • Freight, labor, installation costs, incidental damages or vehicle downtime

How to make a Backwoods Adventure Mods warranty claim

  • Send a written description of the damage and how it happened
  • Include a copy of the original purchase invoice
  • Make the product available for Backwoods to inspect
  • If approved, Backwoods repairs or replaces within a reasonable time

Backwoods Adventure Mods contact: Phone: 479.365.6700 · Email: info@backwoodsadventuremods.com · Claim page / support

Bought it from NVMOS? Start with us.

Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Backwoods Adventure Mods, and help it along either way.

Shop Backwoods Adventure Mods at NVMOS

See all Backwoods Adventure Mods products, lead times and FAQs →

Disclaimer: The information on this page describes Backwoods Adventure Mods's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Backwoods Adventure Mods official warranty information. Last updated on nvmos.com: October 16, 2026. See our return policy for NVMOS's own terms.

About the brand

Backwoods Adventure Mods

Backwoods Adventure Mods designs and builds bumpers, rock sliders, skid plates and racks in Springdale, Arkansas, for the Toyota Tacoma, 4Runner, Tundra and Land Cruiser 250, the Lexus GX550 and the Jeep Gladiator. Its Hi-Lite Overland hybrid bumpers put an aluminum shell over a steel winch plate and use steel recovery points, so you shed weight without trusting a recovery to aluminum. DRIFTR roof racks and overland bed racks cover...

Based in: Springdale, Arkansas · Brand since: 2017 · Built: In-house, in batch production runs · Lead time: In-stock items typically ship in 1–2 business days; out-of-stock items join the next batch build

Backwoods Adventure Mods warranty: Lifetime structural warranty to the original purchaser; 60 days on powder coat. Read the full summary

Warranty terms are set by Backwoods Adventure Mods, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.


These frame support brackets are made for the Backwoods Adventure Mods Hi-Lite front bumper on the 2010–2024 5th Gen Toyota 4Runner. They use the factory bumper mounts, then wrap around and tie into the front sway bar mounts, which Backwoods says better distributes the load when winching or recovering a vehicle.

They are optional, but Backwoods strongly recommends them for anyone who plans to winch — and since they can go on after the bumper is already installed, you can add them later.

Why it works

  • 3/16" steel, powder coated.
  • Ties the bumper mounts into the sway bar mounts to distribute winching and recovery loads.
  • Bolt-on, and can be installed after the bumper is on.
  • Sold as a pair with a hardware kit.

Fitment

2010–2024 Toyota 4Runner (5th Gen) with the Backwoods Hi-Lite Overland front bumper — Backwoods built these specifically for that bumper. Shop the Hi-Lite PreRunner bumper.

Install notes

Bolt-on with the included hardware. You may need to trim the plastic fender liner slightly to clear the bracket. The bumper install video covers the front end:

In the box

  • Driver and passenger support brackets (pair)
  • Hardware kit

Questions before you order?

Fitment questions are easier to settle before the box ships. Call or text Carl & Anton at (920) 249-7744 or use the chat — real humans in Sheboygan, Wisconsin, not a call center.

Finish the whole truck in one order

Complete your Toyota 4Runner build

More parts that fit your Toyota 4Runner and pair well with this one — matched and ready to install.

Toyota 4Runner 5th Gen (2010-2024) Front Bumper Support Brackets (this item) What you’re viewing $175.00
Build total (1 items)
$175.00
The complete look for your Toyota 4Runner.
Set any options above, then add them all in one click — one checkout, one shipment.
Everything else that fits this truck

More for your Toyota 4Runner

Picked from the 1250 parts we carry for the Toyota 4Runner, matched to 2010–2024 model years. Check the years and trim in each title — or call us and we’ll confirm fit.

Shop all 1250 parts for your Toyota 4Runner →

Specifications

  • Part number: BWT4R5-8920
  • Material: 3/16" steel
  • Finish: powder coated
  • Quantity: pair
  • Included: hardware kit
  • Install: bolt-on; slight fender liner trimming may be needed
  • Fitment: 2010-2024 Toyota 4Runner (5th Gen) with Backwoods Hi-Lite front bumper

Toyota 4Runner 5th Gen (2010-2024) Front Bumper Support Brackets FAQs

Do I need these?

They are optional, but Backwoods highly recommends them if you plan to do any winching or vehicle recovery.

Will they work with another brand's bumper?

Backwoods designed them specifically for its Hi-Lite 4Runner front bumper.

Can I add them after the bumper is installed?

Yes. They bolt on easily after the bumper is in place.

Is any trimming required?

You may need to slightly trim the plastic fender liner for clearance. Questions? Call the real humans at NVMOS, (920) 249-7744.

Multi-column

Minimalist icon of three people for social, community, or group activities
Join Our Community

For all things NVMOS, check us out on Instagram and Facebook!

Simple black and white credit card icon for payment or checkout options
Financing Available

Buy now, pay later with PayPal Credit — available at checkout.

black and white envelope mail icon for email or newsletter sign up
Contact Us

Have a question? Just send us an e-mail at support@nvmos.com