Ford Bronco Roof Racks: 2-Door vs 4-Door, Hardtop and Soft Top
A roof rack on a 2021+ Ford Bronco is not a one-size purchase. The rack has to match your door count, your top (factory hardtop, painted hardtop or soft top), how often you pull the roof panels, and what you plan to carry. This guide compares the racks we carry from DV8, RCI, Ruff Rax, ARB, Westin and Prinsu for the full-size Bronco, not the Bronco Sport.
Short answer: Start with three facts about your Bronco: 2-door or 4-door, hardtop or soft top, and whether your hardtop is the painted version. Then pick full length (more deck space; RCI pitches its full-length racks for heavier loads like a rooftop tent) or half length (lighter and covers only the rear of the roof). Every roof rack in this guide is listed for one door count, so order the matching version and confirm fitment on the product page.
Fitment by body style and top (2021+ sixth generation)
The current Bronco has been one generation since 2021, so door count and top matter more than the year.
2-door hardtop
The DV8 2-Door Hard Top Roof Rack (2021-2025) and Prinsu's 2-door hardtop racks are listed for the hardtop. The RCI Ascent and Horizon full-length 2-door racks and the Westin Mesa Roof Rack, 2-Door (2021-2026) are listed for the 2-door Bronco without naming a top type, so confirm your top on the product page. DV8 lists its 2-door rack for the factory hard top only and says it is not compatible with soft tops, 4-door models or OEM painted hard tops. RCI says its 2-door full-length racks are not compatible with the OEM Ford painted roof.
4-door hardtop
Most of the choice is here. DV8, RCI (Ascent and Horizon, full and half length), Ruff Rax, ARB and Prinsu all list 4-door racks. DV8, ARB, Prinsu and the RCI Horizon half length name the hardtop; the other RCI racks and Ruff Rax do not state a top type. Note that DV8's 4-door hard top listing is titled 2021-2025, but DV8's fitment table lists 2021-2024 models across trims from Base to Raptor, so confirm your year on the product page. ARB's BASE Rack kit is listed for 4-door factory hardtop models only.
4-door soft top
Soft top owners have fewer choices. The DV8 4-Door Soft Top Roof Rack (2021-2024 per DV8 fitment) is made for 4-door Broncos with the factory soft top. DV8's fitment lists 2021-2024 even though the title says 2021-2025, and DV8 excludes the Bronco Raptor and Bronco Everglades.
2-door soft top
None of the platform racks in this guide list the 2-door soft top. If that is your setup, see the off-roof storage below or call us before you order.
Painted hardtop vs the standard hardtop
DV8 says its hard top racks will not work with OEM painted hard tops, and RCI lists its full-length racks as not compatible with the OEM Ford painted roof. Prinsu says the mounting feet on its 4-door Pro rack differ by hardtop type, so you need to know whether you have a painted hardtop or the MIC hardtop (gray and black, not color matched) before ordering.
Full length vs half length
A half-length rack covers the rear section and leaves the front of the roof open; a full-length rack runs most of the roof. On the Bronco that choice is mostly about load and deck space. RCI says its full and half racks both let the three front roof panels come off with the rack in place.
RCI makes both styles. The RCI Horizon Half Length Roof Rack, 4-Door (2021+) and RCI Ascent Half Length Roof Rack, 4-Door (2021+) each weigh 30 lb according to RCI. The full-length versions are heavier: RCI lists the Horizon full-length 4-door at 72 lb and the Ascent full-length 4-door at 74 lb, with both 2-door full-length racks at 63 lb.
RCI describes the 2-door Ascent full-length rack as built for roof top tents and heavy loads, and for its full-length racks it strongly recommends installing the side filler panels for high-load use such as a rooftop tent, because they stiffen the rack considerably. Neither half-length listing mentions rooftop tent use, so do not assume a half rack is tent rated.
For a tent, start with a full-length rack and check its listed load where one is given. For a few recovery items, a half rack is a sensible place to start. Tent sizing is in our rooftop tent guide.
Platform racks compared
A platform rack is a flat deck with crossbars that gives you a wide surface to strap and mount gear to. The table shows only what each listing states.
| Rack | Doors and top | Length | Listed load | Drilling | Listed weight |
|---|---|---|---|---|---|
| DV8 2-Door Hard Top | 2-door, factory hard top, not painted tops | Not stated | 200 lb evenly distributed (dynamic) | Bolt-on, drilling not stated | Not stated |
| DV8 4-Door Hard Top | 4-door, factory hard top, not painted tops | 90.5 x 44.5 in listed | 200 lb evenly distributed (dynamic) | Bolt-on, drilling not stated | About 53 lb |
| DV8 4-Door Soft Top | 4-door, factory soft top, not Raptor or Everglades | Not stated | 200 lb evenly distributed (dynamic) | Bolt-on, factory hardware, drilling not stated | About 31 lb |
| RCI Ascent / Horizon full length | 2-door or 4-door versions, top type not stated, not OEM painted roof | Full | Not stated | Bolt-on, clamp system and OEM studs | 63 to 74 lb by version |
| RCI Ascent / Horizon half length | 4-door (Horizon lists the hard top) | Half | Not stated | Bolt-on, clamp system and OEM studs; Horizon says no drilling | 30 lb |
| Ruff Rax Modular | 4-door, 2021-2027 | Not stated (5 crossbars) | 330 lb static, 660 lb dynamic | Drilling required per spec sheet | Not stated |
| ARB BASE Rack kit | 4-door factory hardtop, 2021-2024 | Not stated | 285 lb net payload, 55 lb per beam | Mount listing says drilling through hardtop | Not stated |
| Westin Mesa | 2-door, 2021-2026, top type not stated | Not stated | Not stated | No drilling | Not stated |
| Prinsu Pro | 4-door hardtop, 2021-2026 | Two-piece | Not stated | No drilling | Not stated |
DV8 uses 2mm and 3.5mm steel plate with arced cross bars. RCI uses 1/4-inch 5052 aluminum side panels; most RCI racks are listed as made to order, so check current lead times. Ruff Rax uses aluminum extrusions with T-slot channels and says most Thule, Yakima and Rhino-Rack accessory mounts slide in. ARB describes the BASE Rack as fully welded extruded aluminum; the separate ARB BASE Rack Mount with Wind Deflector, 4-Door (2021-2025) is made for the 61 x 51 in BASE Rack (part 1770020). Prinsu builds its Pro rack in powder-coated aluminum and also lists a Prinsu Pro Rack, 2-Door Hardtop (2021-2025); see the Prinsu roof rack guide for its versions.
Rail and track racks, and storage off the roof
Some systems start with rails or tracks fastened to the roof, with crossbars that attach to them. The Ruff Rax Modular Roof Rack, 4-Door (2021-2027) rides on Ruff Rax TP-54 roof tracks, installed by Ruff Rax or a certified installer, and its spec sheet lists drilling required. Ruff Rax says the components are interchangeable, so you can change the setup later.
To keep gear off the roof, the Diabolical Slipstream Rail Rack bolts into Diabolical's Slipstream tie-down rails (sold separately) to hard mount a Hi-Lift jack or shovel. The TeraFlex Sierra Rear Cargo Rack adds storage in the rear cargo area of 2021+ 2-door and 4-door Broncos.
Add-ons: roof light bar mounts and side MOLLE panels
Roof light bar mounts
Several racks build in a spot for a light bar: DV8 says its racks are designed to work with its 40-inch and 50-inch light bar mounts, the front fairing on RCI's full-length racks takes up to a 42-inch light bar, Westin's Mesa has a light channel behind its deflector, and Prinsu offers a lightbar-cutout wind deflector option on its 4-door Pro rack.
Without an aftermarket rack, there are Bronco-specific roof mounts. The Morimoto Light Bar Roof Mounts (2021-2026) are mounts only. The RIGID Roof Line 40 in. SR-Series Light Bar Mount Kit (2021-2026) takes a 40 in. SR-Series PRO straight bar, while RIGID's roof rack mount kit requires the factory roof rack. Baja Designs notes its 8XL Linkable roof kit is not compatible with factory roof racks. Cali Raised LED's Roof Light Bar Mount For 2021+ Ford Bronco (for a 42-inch curved bar) is titled 2021+, but its description gives fitment as the 2022+ Bronco Raptor, so treat it as a 2022+ Raptor part and confirm fitment on the product page.
Rules on using roof lights on public roads vary by state, so check yours. For bar sizes and wiring, see the Ford Bronco light bar guide.
Side MOLLE panels
RCI makes side MOLLE panels for both body styles: the RCI Roof Rack Side Molle Panel, 4-Door (2021+) and the RCI Roof Rack Side Molle Panel, 2-Door (2021+). They are laser cut 3/16-inch aluminum with MOLLE cutouts and slotted holes for RotoPax, shovel and axe mounts, with a 14-gauge steel lower bracket. RCI recommends a 40 lb limit per panel. Each listing is for one panel, driver or passenger, so order two if you want both sides.
Installation, drilling and the removable top
- Front panels with the rack on. RCI says all three front roof panels can come off with its Ascent and Horizon racks in place. On the Ascent full-length racks, RCI says the side filler panels come off when you want the roof open.
- Two-piece racks. Prinsu's 4-door Pro rack splits so the front section comes off and the rear stays bolted down.
- Drilling. Westin, the Prinsu 4-door Pro and the RCI Horizon half length state no drilling. DV8 and the other RCI racks are listed as bolt-on using factory hardware or OEM studs but do not mention drilling. Ruff Rax lists drilling required for its tracks, and the ARB BASE mount listing says it requires drilling through the hardtop. Drilling into a top is permanent, so make that call before you order.
- Time. DV8 lists about 3 hours, and two people for the 2-door. RCI lists about 45 minutes of assembly.
- Spare hardware. RCI sells a replacement RCI Hardware Kit for 4-Door Full Length Roof Rack (2021+).
What NVMOS carries
- DV8 2-Door Hard Top Roof Rack (2021-2025): steel plate, rated 200 lb evenly distributed (dynamic).
- DV8 4-Door Hard Top Roof Rack (2021-2024 per DV8 fitment): listed at 90.5 x 44.5 in, about 53 lb.
- DV8 4-Door Soft Top Roof Rack (2021-2024 per DV8 fitment): factory soft top only, excludes Raptor and Everglades.
- RCI Ascent Full Length Roof Rack, 4-Door (2021+): T-slot crossbars, 74 lb.
- RCI Ascent Half Length Roof Rack, 4-Door (2021+): 30 lb, front roof panels stay removable.
- RCI Ascent Full Length Roof Rack, 2-Door (2021+): 63 lb, removable side fillers.
- RCI Horizon Full Length Roof Rack, 4-Door (2021+): steel cross members, 72 lb.
- RCI Horizon Half Length Roof Rack, 4-Door (2021+): 30 lb, for the hard top.
- RCI Horizon Full Length Roof Rack, 2-Door (2021+): front fairing takes up to a 42-inch light bar.
- Ruff Rax Modular Roof Rack, 4-Door (2021-2027): 330 lb static and 660 lb dynamic limits, drilling required.
- ARB BASE Rack Kit with Mount and Wind Deflector (2021-2024): 4-door factory hardtop, 285 lb net payload.
- Westin Mesa Roof Rack, 2-Door (2021-2026): aluminum, removable deflector, no drilling.
- Prinsu Pro Roof Rack, 4-Door Hardtop (2021-2026): two-piece, front section removes.
- RCI Roof Rack Side Molle Panel, 4-Door (2021+): one panel per order, 40 lb limit.
- RCI Roof Rack Side Molle Panel, 2-Door (2021+): 3/16-inch aluminum, bolts to factory points.
Browse by category: Ford Bronco parts, complete roof racks, roof rack accessories, rack mounts and brackets, light bar mounts, shop by vehicle, current lead times and vendor warranty policies. Related guides: Ford Bronco accessories by category, Ford Bronco light bars, Prinsu roof racks and rooftop tents.
Frequently asked questions
Will a 4-door Bronco roof rack fit a 2-door?
No. Every roof rack in this guide is listed for one door count. DV8, RCI and Prinsu list separate 2-door and 4-door versions, the Westin Mesa here is 2-door only, and the Ruff Rax and ARB racks are 4-door only, so order the one that matches your Bronco.
Can I put a roof rack on a soft top Bronco?
For the 4-door, yes. DV8 makes a 4-Door Soft Top Roof Rack for the factory soft top, listed for 2021-2024 in DV8 fitment, excluding the Raptor and Everglades. None of the racks here list the 2-door soft top.
Do these racks work with the painted hardtop?
Check each listing. DV8 hard top racks and RCI full-length racks are listed as not compatible with the OEM painted top, and Prinsu uses different feet for painted and MIC hardtops.
Can I still remove the roof panels with a rack installed?
On some racks, yes. RCI says all three front roof panels can come off with its Ascent and Horizon racks in place, and the Prinsu Pro 4-door front section comes off while the rear stays bolted down.
Do I need to drill my Bronco top?
It depends on the rack. Westin, the Prinsu 4-door Pro and the RCI Horizon half length state no drilling, and DV8 and the other RCI racks are listed as bolt-on without mentioning drilling. Ruff Rax lists drilling required for its roof tracks, and the ARB BASE mount requires drilling through the hardtop.
Which rack should I use for a rooftop tent?
Start with a full-length rack and check its listed load where one is given. RCI strongly recommends the side fillers on its full-length racks for rooftop tent use, Westin says the Mesa is engineered to accommodate most roof top tents, and Ruff Rax lists 330 lb static and 660 lb dynamic limits. Check your tent weight against those numbers.
Does a roof light bar come with these racks?
No. The racks are sold without lights. Several have a spot for one, such as the front fairing on RCI full-length racks for up to a 42-inch bar, and light bar mounts and kits are sold separately.
Not sure what fits your truck? Call a real person at (920) 249-7744 or send us a message, and we will help you sort it out.






