RCI 2 Door Ascent Full Length Roof Rack - 2021-Present Ford Bronco
Warranty Information
Vendor warranty summary
RCI Metalworks Warranty
At a glance: Lifetime structural warranty for the original purchaser; 180 days on powder coat
This is RCI Metalworks' warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 14, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Structure (skid plates, sliders, racks and other RCI-made parts) against defects in material and craftsmanship | Lifetime, original purchaser |
| Powder coat finish (peeling, bubbling, light areas) | 180 days |
What's covered
- Defects in material and craftsmanship on the part's structure, for as long as the original purchaser owns it
- Powder coat that peels, bubbles or shows light areas within 180 days, as determined by RCI
- RCI repairs or replaces the part at its discretion after inspecting it
What's not covered
- Improper installation, alteration, abuse, neglect or accidents
- Corrosion and normal wear
- Off-road damage (with some exceptions RCI decides case by case)
- Freight, labor, installation or downtime costs
- Hook marks from hanging parts for coating, unless the finish fails
How to make an RCI warranty claim
- Write a description of the damage and take clear photos
- Include a copy of the original invoice
- RCI inspects the part and decides whether to repair or replace it
RCI contact: RCI warranty page
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to RCI, and help it along either way.
See all RCI Metalworks products, lead times and FAQs →
Disclaimer: The information on this page describes RCI Metalworks' own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: RCI Metalworks official warranty. Last updated on nvmos.com: October 14, 2026. See our return policy for NVMOS's own terms.
About the brand
RCI Metalworks builds skid plates, rock sliders, bumpers and racks in Loveland, Colorado, doing the cutting, bending, welding and powder coat in-house. NVMOS carries the RCI lineup for Toyota 4Runner, Tacoma, Tundra and Land Cruiser, Lexus GX, Ford Bronco, Ranger and F-150, Jeep Wrangler JL and more. Steel or aluminum, coated or bare.
Based in: Loveland, Colorado · Made in: USA (built in-house in Colorado) · Lead time: Built to order, about 1–6 weeks by category
Shop all 518 RCI MetalworksWarrantyLead timesAll brands
Warranty terms are set by RCI Metalworks, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
The full-length Ascent for the two-door Bronco is built for roof top tents and heavy loads. Like the half rack, the three front roof panels can come off with the rack in place, and each side has a removable filler panel for a finished look. Side panels and rear fairing are 1/4-inch 5052 aluminum, the front fairing is 1/8-inch and accommodates up to a 42-inch light bar, and the cross-bars are 1x2-inch T-slot. It sits under 4 inches above the roof and weighs 63 lb.
This is the larger of the two Ascent racks for the two-door Bronco, with more mounting area for tents, boards and lighting. Because it has removable side filler panels, you can leave them on for a closed look or take them off when you want to lift the roof panels.
Fitment
Made for the 2021-present Ford Bronco 2-door. Not compatible with the OEM Ford painted roof. RCI strongly recommends installing the filler panels for high-load use such as a roof top tent, since they stiffen the rack considerably.
What's included
The rack, a filler piece for each side, rubber trim, black stainless hardware and instructions.
Install notes
Bolt-together assembly takes about 45 minutes, using a clamp system and OEM Ford studs. The vendor notes the rack is new and expected to ship in roughly 4 weeks, so treat availability as a lead time.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text Carl & Anton at (920) 249-7744 or use the chat — real humans in Sheboygan, Wisconsin, not a call center.
Complete your Bronco Parts build
More parts that fit your Bronco Parts and pair well with this one — matched and ready to install.
More for your Ford Bronco
Picked from the 658 parts we carry for the Ford Bronco. Check the years and trim in each title — or call us and we’ll confirm fit.
Specifications
RCI 2 Door Ascent Full Length Roof Rack FAQs
Does it fit the OEM painted roof?
No.
Should I install the filler panels?
Yes for high loads like a roof top tent.
When will it ship?
The vendor says about 4 weeks.
How long to install?
About 45 minutes.
Multi-column

Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!

Financing Available
Buy now, pay later with PayPal Credit — available at checkout.

Contact Us
Have a question? Just send us an e-mail at support@nvmos.com











































