upTOP Tent Riser Mounting Kit
For qualified buyers at checkout
Secure checkoutEncrypted payment
Warranty Information
Vendor warranty summary
upTOP Overland Warranty
At a glance: Limited lifetime on upTOP-manufactured parts for the original retail purchaser; the powder-coated finish is not covered
This is upTOP Overland's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 22, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| upTOP-manufactured parts: KILO roof racks, TRUSS bed racks, bed bar and crossbar kits, mounts and accessories | Limited lifetime |
| 38" Dual Function Light Bar (per upTOP product page) | Lifetime |
| Powder-coated finish | Not covered |
What's covered
- Defects in materials or workmanship on upTOP-manufactured parts
- For as long as the original retail purchaser owns the product (the warranty ends if it is sold or transferred)
- upTOP may repair or replace the part, or issue a refund or a credit toward a new upTOP product, at its option
- Products must be installed following upTOP's written or video instructions
What's not covered
- The powder-coated finish, normal wear and tear, cosmetic rust and scratches
- Any customization or modification of the product (this voids the warranty)
- Misuse, neglect, overloading, improper maintenance, or failure to assemble and mount per instructions
- Accidents, unlawful vehicle operation, racing or competition use
- Damage to your vehicle, cargo or other property
How to make an upTOP Overland warranty claim
- Check that the product is still installed and assembled per upTOP's instructions, and inspect it for loose hardware
- Photograph the defect and gather your proof of purchase
- Contact upTOP support; upTOP decides warranty eligibility at its sole discretion
upTOP Overland contact: Email: support@uptopoverland.com · Contact page
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to upTOP, and help it along either way.
Shop upTOP Overland at NVMOS
upTOP KILO Roof Rack for Toyota Tacoma Double Cab | 2005-2023
upTOP TRUSS Bed Rack - Mid Height (11.75")
upTOP KILO Roof Rack for 5th Gen Toyota 4Runner | 2010-2024
See all upTOP Overland products, lead times and FAQs →
Disclaimer: The information on this page describes upTOP Overland's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: upTOP Overland official warranty and disclaimers. Last updated on nvmos.com: October 22, 2026. See our return policy for NVMOS's own terms.
About the brand
upTOP Overland designs and builds lightweight aluminum roof racks, bed racks and rack accessories in the USA. NVMOS carries the low-profile KILO roof racks for the Tacoma, 4Runner, Tundra, Land Cruiser and F-150, the modular TRUSS bed racks for most mid-size and full-size pickups, and the mounts, lighting and hardware that bolt onto them.
Based in: Idaho (originally Colorado) · Made in: USA, in-house · Lead time: Most racks 4–6 weeks, built to order
Shop all 42 upTOP OverlandWarrantyAll brands
Warranty terms are set by upTOP Overland, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
Rooftop tents hanging off the back of the rack, or crowding an awning bracket, usually just need a little lift. The upTOP Tent Riser Mounting Kit is a set of offset riser feet that raise your tent 1", 2" or 3" off the crossbars. That clears shade and awning brackets and lets longer hard-shell tents sit where they belong.
Offset slots let you reuse the hardware that came with your tent, so installation is quick. The feet work on upTOP racks and on Rhino-Rack, Front Runner, Prinsu and other racks with similar crossbar designs.
Choose your kit
- Height: 1", 2" or 3"
- Quantity: 4 pack or 6 pack
This kit is for standard 2"x1" roof rack or 2"x2" bed rack extrusion crossbars, and includes slide-in t-nuts. Measure your load bars before you buy; the hardware is specific to bar size. Tent-to-riser hardware comes from your tent manufacturer.
upTOP Tent Riser Mounting Kit FAQs
Do I need new tent bolts?
No. The offset slots let you use the hardware that came with your tent.
Four or six pack?
Match the number of mounting points your tent uses.
Will it fit my rack?
This kit is for 2x1 or 2x2 inch extrusion crossbars. Measure your bars before ordering.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
