TeraFlex JT: Alpine Long Arm & Bracket Kit - 8-Arm (3-6" Lift)
For qualified buyers at checkout
Secure checkoutEncrypted payment
Warranty Information
Vendor warranty summary
TeraFlex Warranty
At a glance: Lifetime on suspension, steering and armor; 1 year on Falcon shocks and drivetrain; 90 days on finish
This is TeraFlex's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Suspension (coils, bump stops, control arms, track bars, sway bars/links, IR bushings) | Lifetime |
| 9550 shocks and stabilizer | Lifetime |
| Steering and brakes (ball joints, tie rods, drag links, big brake kits, rotors, brake lines) | Lifetime |
| Body armor (skids, racks, Alpha carrier, CB mounts) | Lifetime |
| Wheels and adapters | Lifetime |
| Delta Brake Kit | 3 years |
| Falcon shocks (all series) | 1 year |
| Axle assemblies, housings, knuckles, shafts, conversions | 1 year |
| Alpine control arm and track bar bushings; driveshaft parts; transfer case kits | 1 year |
| Recovery gear (straps, D-rings) | 1 year |
| Paint and powder coat | 90 days (defects only) |
| Wear items (brake pads, rotors) | Not covered |
- Original purchaser only — coverage does not transfer if you sell it.
- Keep your NVMOS order confirmation — proof of purchase is required.
What's covered
- Defects in materials and workmanship
- TeraFlex chooses to repair, replace or refund at no charge (except inbound shipping)
- TeraFlex pays the freight to send the part back to you
What's not covered
- Improper use, failure to follow instructions, or improper installation/maintenance
- Modifications or unauthorized repair
- Normal wear and tear, and finish beyond the 90-day term
- Racing or competition use
- Shipping/storage damage and other outside causes
- Removal labor (customer's responsibility)
How to make a TeraFlex warranty claim
- Call TeraFlex customer service, Mon-Fri 8am-5pm MST
- Have proof of purchase or the original invoice ready
- Remove the part and ship it in at your cost
TeraFlex contact: Phone: (801) 713-3314 · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to TeraFlex, and help it along either way.
Shop TeraFlex at NVMOS
TeraFlex Nomad Split Spoke Off-Road Wheel - 5x5" - -12mm - Metallic Black
TeraFlex Nomad Split Spoke Off-Road Wheel - 8X6.5" - -12mm - Metallic Black
TeraFlex Nomad Split Spoke Off-Road Wheel - 8X6.5" -12mm - Bronze
See all TeraFlex products, lead times and FAQs →
Disclaimer: The information on this page describes TeraFlex's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: TeraFlex official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
TeraFlex has built Jeep suspension since 1996, works out of West Jordan, Utah, and now covers the Ford Bronco, Toyota Tacoma and Super Duty too. NVMOS carries TeraFlex lift kits, Falcon shocks, Alpine control arms, sway bars, ball joints, wheel adapters and Nomad and Olympus wheels. For Jeep and Bronco owners building for the trail.
Based in: West Jordan, Utah · Made in: USA (Utah) · Founded: 1996 (manufacturing) · Lead time: In-stock items ship in 24–48 hours
Shop all 1057 TeraFlexWarrantyAll brands
Warranty terms are set by TeraFlex, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
TeraFlex JT Alpine Long Arm & Bracket Kit, 8-Arm (3-6" Lift)
This is the standard Alpine long arm and bracket kit for the JT Gladiator with a 3 to 6" lift. It uses factory-style bushings rather than IR bushings. The Alpine arms give complete alignment adjustability. Find more control arms.
The factory-style bushings are maintenance free and damp noise and vibration for a good ride. CAD-engineered brackets combine upper and lower mounts, and the Front Long Arm Suspension Crossmember adds strength. Installation takes about 16 hours. See Jeep Gladiator parts.
Jeep JT Gladiator (pickup), 2020 to present, with a 3 to 6" lift. Requires cutting or removing factory control arm bracketry. Brackets are not compatible with all rock sliders. Alignment required. Estimated labor time is 16 hours.
Videos
Complete your Jeep Gladiator build
The pieces owners run with this one — matched to your Jeep Gladiator and to each other. Do the whole truck in one order instead of three.
$3,299.94
$370.00
$541.99
$2,449.99
$944.95
More for your Jeep Gladiator
Picked from the 958 parts we carry for the Jeep Gladiator. Check the years and trim in each title — or call us and we’ll confirm fit.
TeraFlex JT: Alpine Long Arm & Bracket Kit FAQs
How is this different from the IR kit?
This kit uses Alpine arms with factory-style bushings, while the IR kit uses Independent Rotation bushings.
Is cutting required?
Yes. Factory control arm bracketry must be cut or removed.
Do I need a skid plate?
The RockGuard Transmission Skid Plate with crossmember reinforcement is recommended.
How long does it take to install?
TeraFlex estimates 16 hours.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
