In-stock parts ship in 24–48 hours · Questions? Real humans: (920) 249-7744

Shop by Vehicle Pick your rig and see everything that fits
1
2
3
Browse popular rigs & all vehicles Hide vehicles
SKU: 88-31070

ReadyLIFT LOGIQ Rear Air Spring Kit - Chevy Silverado & GMC Sierra 1500 2007-2018

$549.95

180-Day ReturnsOn uninstalled, unused parts Real humans who wheel(920) 249-7744 PayPal Credit acceptedFinancing option at checkout Secure checkoutEncrypted payment
Confirmed fit: 2007–2018 Chevrolet Silverado
Verified to fit the 2007–2018 Chevrolet Silverado.
Warranty Information

Vendor warranty summary

ReadyLIFT Warranty

At a glance: Defective parts replaced with no stated time limit; wear parts up to 1 year

This is ReadyLIFT's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.

Coverage by product

Product or component Coverage
Lift and leveling kit components Lifetime replacement for defects (original buyer)
Wear parts: shocks, ball joints, heim joints, bushings, steering extensions Up to 1 year
Discontinued, clearance or outlet products Not covered
  • Original purchaser only — coverage does not transfer if you sell it.

What's covered

  • Missing or defective components: if a part breaks, ReadyLIFT sends a new one
  • ReadyLIFT may ask for the old part back at its own cost for analysis, without holding up the replacement
  • Jeep SST and Terrain Flex kits are covered for recreational off-road use

What's not covered

  • Off-road abuse (except Jeep SST and Terrain Flex kits)
  • Discontinued, clearance and outlet items
  • Labor, installation, surcharges and fees
  • Resulting damage to the vehicle

How to make a ReadyLIFT warranty claim

  • Call ReadyLIFT customer service to start a claim (7:30am-4pm MST)
  • ReadyLIFT ships the replacement part, quickly where possible

ReadyLIFT contact: Phone: 800-549-4620 (toll free); 702-410-2300 · Claim page / support

Bought it from NVMOS? Start with us.

Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to ReadyLIFT, and help it along either way.

Shop ReadyLIFT at NVMOS

See all ReadyLIFT products, lead times and FAQs →

Disclaimer: The information on this page describes ReadyLIFT's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: ReadyLIFT official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.

About the brand

ReadyLIFT

ReadyLIFT is an Ogden, Utah suspension brand built around more tire clearance with close-to-factory ride. NVMOS carries ReadyLIFT leveling kits, SST mid-lifts, Big Lift kits, rear blocks, control arms and wheel spacers for Ford, GM, Ram, Toyota and Jeep trucks.

Based in: Ogden, Utah · Founded: 2006 · Lead time: In-stock ships in 24–48 hrs

ReadyLIFT warranty: Defective parts replaced with no stated time limit; wear parts up to 1 year. Read the full summary

Warranty terms are set by ReadyLIFT, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.


This is a ReadyAIR load-leveling kit powered by LOGIQ air springs, built for GM half-ton trucks. It mounts over the axle with a single air sleeve and uses the factory bumpstops, so you keep the stock suspension travel while gaining load support for towing and hauling.

The vendor builds each kit around a single scaled air spring rather than a one-size-fits-all part, and says LOGIQ springs have a lower natural frequency (1.6Hz) than double-bellow competitors (about 2.5Hz) for a softer ride. The install uses clamp-around brackets with no drilling, and it is compatible with a wide range of OEM and aftermarket fifth wheel hitches.

Fitment

2007-2018 GM 1500 trucks. If the rear is lifted, add spacer kit 88-91003 or 88-91006. Trucks with CCD height sensors need Height Sensor Relocation Kit 88-21150-1. It is not compatible with most aftermarket leaf springs.

What's included

A fully pre-assembled kit and a heat wrap kit for the tailpipe.

Never exceed the truck's maximum payload or GVWR.

Questions before you order?

Fitment questions are easier to settle before the box ships. Call or text Carl & Anton at (920) 249-7744 or use the chat — real humans in Sheboygan, Wisconsin, not a call center.

Finish the whole truck in one order

Complete your Chevrolet Silverado build

More parts that fit your Chevrolet Silverado and pair well with this one — matched and ready to install.

ReadyLIFT LOGIQ Rear Air Spring Kit - Chevy Silverado & GMC Sierra 1500 2007-2018 (this item) What you’re viewing $549.95
✓ 2007-2013 Chevy Silverado/GMC Sierra Rear Bumper Covers Finish $99.95
✓ 2016-2018 Chevy Silverado 1500 - Front BUMPERSHELLZ™ -Chrome Delete Bumper Cap Kit Finish $219.95
✓ 2014-2015 Chevy Silverado 1500 Front Bumper Overlays Finish $209.95
Build total (1 items)
$549.95
The complete look for your Chevrolet Silverado.
Set any options above, then add them all in one click — one checkout, one shipment.
Everything else that fits this truck

More for your Chevrolet Silverado

Picked from the 444 parts we carry for the Chevrolet Silverado, matched to 2007–2018 model years. Check the years and trim in each title — or call us and we’ll confirm fit.

Shop all 444 parts for your Chevrolet Silverado →

Specifications

  • Brand: ReadyLIFT (ReadyAIR by LOGIQ)
  • Part number: 88-31070
  • Fitment: 2007-2018 GM 1500
  • Lifted rear: add 88-91003 or 88-91006
  • CCD height sensors: need 88-21150-1
  • Warranty: Limited Lifetime plus ReadyGUARD 5-year/60,000-mile powertrain

ReadyLIFT LOGIQ Rear Air Spring Kit FAQs

Does it require drilling?

No. The vendor describes clamp-around bracket designs with no drilling required.

What if my truck is lifted in the rear?

Add spacer kit 88-91003 or 88-91006.

Does my truck need anything extra?

Trucks with CCD height sensors need Height Sensor Relocation Kit 88-21150-1.

Will it work with aftermarket leaf springs?

Not with most of them. The vendor lists it as not compatible with most aftermarket leaf springs.

Multi-column

Minimalist icon of three people for social, community, or group activities
Join Our Community

For all things NVMOS, check us out on Instagram and Facebook!

Simple black and white credit card icon for payment or checkout options
Financing Available

Buy now, pay later with PayPal Credit — available at checkout.

black and white envelope mail icon for email or newsletter sign up
Contact Us

Have a question? Just send us an e-mail at support@nvmos.com