ReadyLIFT 2021-2026 Ford Bronco 3" SST Lift Kit W/ HD Ball Joints - Sasquatch Package-equipped
Warranty Information
Vendor warranty summary
ReadyLIFT Warranty
At a glance: Defective parts replaced with no stated time limit; wear parts up to 1 year
This is ReadyLIFT's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Lift and leveling kit components | Lifetime replacement for defects (original buyer) |
| Wear parts: shocks, ball joints, heim joints, bushings, steering extensions | Up to 1 year |
| Discontinued, clearance or outlet products | Not covered |
- Original purchaser only — coverage does not transfer if you sell it.
What's covered
- Missing or defective components: if a part breaks, ReadyLIFT sends a new one
- ReadyLIFT may ask for the old part back at its own cost for analysis, without holding up the replacement
- Jeep SST and Terrain Flex kits are covered for recreational off-road use
What's not covered
- Off-road abuse (except Jeep SST and Terrain Flex kits)
- Discontinued, clearance and outlet items
- Labor, installation, surcharges and fees
- Resulting damage to the vehicle
How to make a ReadyLIFT warranty claim
- Call ReadyLIFT customer service to start a claim (7:30am-4pm MST)
- ReadyLIFT ships the replacement part, quickly where possible
ReadyLIFT contact: Phone: 800-549-4620 (toll free); 702-410-2300 · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to ReadyLIFT, and help it along either way.
Shop ReadyLIFT at NVMOS
ReadyLIFT 8" Lift Kit - Toyota Tundra 2007-2021 W/ Bilstein Shocks
ReadyLIFT 1.5" Rear Add-A-Leaf Kit - Ford F-150
ReadyLIFT 7/8" Wheel Spacers W/ Studs - GM 1500
See all ReadyLIFT products, lead times and FAQs →
Disclaimer: The information on this page describes ReadyLIFT's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: ReadyLIFT official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
ReadyLIFT is an Ogden, Utah suspension brand built around more tire clearance with close-to-factory ride. NVMOS carries ReadyLIFT leveling kits, SST mid-lifts, Big Lift kits, rear blocks, control arms and wheel spacers for Ford, GM, Ram, Toyota and Jeep trucks.
Based in: Ogden, Utah · Founded: 2006 · Lead time: In-stock ships in 24–48 hrs
Shop all 556 ReadyLIFTWarrantyAll brands
Warranty terms are set by ReadyLIFT, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
ReadyLIFT 3" SST Lift Kit with HD Ball Joints for 2021-2026 Ford Bronco with Sasquatch Package
The ReadyLIFT 69-21310 is a 3-inch SST lift for the 2021-2026 Ford Bronco with the Sasquatch Package, which covers Badlands, Wildtrak and First Edition. The upper control arms arrive with heavy-duty high-angle ball joints already installed. Browse Ford Bronco parts.
You bolt it on with no cutting and no modifying stock ball joints. A slight front-to-rear rake leaves room for a bigger spare and accessories. The kit supports up to 37x12.50 tires on 17x8.5 wheels at +18 offset, and up to 38x12.50 with trimming. See other lift kits.
| Spec | Detail |
|---|---|
| Part number | 69-21310 |
| Lift | 3 inches |
| Max tire | 37x12.50 on 17x8.5, +18 offset |
| Max with trimming | 38x12.50 on 17x8.5, +18 offset |
2021-2026 Ford Bronco with the Sasquatch Package, including Badlands, Wildtrak and First Edition. Not for Bronco Sport or vehicles with Hoss 3.0 Fox shocks. Not tested on the Bronco Big Bend with the stock 2-inch lift. A 37x12.50 will contact the front body mount and possibly the rear inner fender through full travel and lock-to-lock steering.
Install guides & documents
Complete your Bronco Parts build
The pieces owners run with this one — matched to your Bronco Parts and to each other. Do the whole truck in one order instead of three.
More for your Ford Bronco
Picked from the 1160 parts we carry for the Ford Bronco, matched to 2021–2026 model years. Check the years and trim in each title — or call us and we’ll confirm fit.
ReadyLIFT 2021-2026 Ford Bronco 3" SST Lift Kit W/ HD Ball Joints FAQs
How is this different from the 69-21300?
The 69-21310 adds heavy-duty high-angle ball joints pre-installed in the upper control arms.
Will 37-inch tires rub?
A 37x12.50 works at ride height, but the tire still contacts the front body mount and possibly the rear inner fender through travel and steering lock. Those areas must be addressed.
Does it fit a Bronco Sport?
No. These kits are not compatible with the Bronco Sport.
Multi-column

Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!

Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.

Contact Us
Have a question? Just send us an e-mail at support@nvmos.com




















