ReadyLIFT 2" Front Leveling Kit With Diff Drops- Toyota Tundra 2022-2026 And 2023-2025 Sequoia

ReadyLIFT leveling kits are the fastest, safest, most cost-effective way to bring the front of your vehicle level with the rear for that ideal lifted neutral stance. Our front strut assembly eliminates the hassle, time, and concern of compressing springs. A ReadyLIFT leveling kit will maintain a smooth OEM ride without adding stress to stock suspension components!

The all-new part number 66-52201 2022-2026 Toyota Tundra and 2023-2026 Sequoia Leveling Kit is an excellent choice for those who want a level stance while running larger tires up to 34 inches. The no-trim maximum tire size for this kit is a 295-60R20 with a 20" X 9" wheel and +18 offset.

Drops front differential to provide better maximum operating angle for CV joints

Polyurethane bushings prevent differential movement under load

100% Bolt-on with no cutting or welding

CNC laser cut steel brackets

Note: Not for use on Tundra equipped factory rear air, or TRD PRO. To make the TRD Pro skidplate work with this application you will need the Skid Plate Drop Kit (PN: 67-52050). ReadyLIFT's new Toyota Tundra High-Performance CV Axle (PN: 67-52420CV) kits are recommended on all lifted 22-UP Tundra's. Failure to use these axle shafts may lead to damage if used in 4WD not covered by the manufacturer.

Highlights

• 2022-2026 Toyota Tundra and 2023-2026 Sequoia Leveling Kit is an excellent choice for those who want a level stance while running larger tires up to 34 inches.
• 2" Leveling Kit - Max Tire Diameter 34"
• No-trim maximum tire size for this kit is a 295-60R20 with a 20" X 9" wheel and +18 offset.
• Fabricated steel front strut spacers with durable black powder coat finish
• Drops front differential to provide better maximum operating angle for CV joints
• Polyurethane bushings prevent differential movement under load
• 100% Bolt-on with no cutting or welding
• CNC laser cut steel brackets
• Note: Not for use on Tundra equipped factory rear air, or TRD PRO. To make the TRD Pro skid plate work with this application, you will need the Skid Plate Drop Kit (PN: 67-52050). ReadyLIFT's new Toyota Tundra High-Performance CV Axle (PN: 67-52420CV) kits are recommended on all lifted 22-UP Tundra's. Failure to use these axle shafts may lead to damage if used in 4WD not covered by the manufacturer.

Tire Fitment

295-60R20 with a 20" x 9" wheel and +18 offset

Kit Components

• Front Strut Spacer
• Front Differential Drop - Left Hand Side (Driver)
• Front Differential Drop - Right Hand Side (Pass)
• 0.87" OD x 0.56" ID x 2.65" Crush Sleeve
• 1.52" OD x 0.85" ID Polyurethane Bushing
• Hardware Pack

Alignment and headlamp aim check recommended after installation.