ORACLE Lighting Auxiliary Light Pods for 5882-Series Flush Tail Lights - Jeep Gladiator JT 2020-2025
Warranty Information
Vendor warranty summary
ORACLE Lighting Warranty
At a glance: 1 to 5 years depending on product; VEGA pods 5 years
This is ORACLE Lighting's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Most products: light bars, LED pods, strips, bulbs, HID kits, halos on pre-assembled lights, DRLs, controllers/remotes, illuminated emblems, power supplies and switches, wheel rings, flush-mount tail lights | 1 year |
| Rock lights, Vector grilles, Oculus headlights, off-road LED headlights, 7" high-powered LED headlights, reverse light modules, select sidemarkers | 2 years |
| VEGA pod lights | 5 years |
| Clearance items | Not covered (sold as-is) |
- Original purchaser only — coverage does not transfer if you sell it.
- Keep your NVMOS order confirmation — proof of purchase is required.
What's covered
- Factory defects confirmed by ORACLE's diagnosis
- ORACLE decides whether to repair or exchange the returned part
- US returns that require shipping back get a prepaid label
What's not covered
- Negligence, misuse, improper installation and normal wear
- Broken, cracked or physically damaged products
- Products that were opened, taken apart, cut, or rewired
- Scratches and scuffs from normal use
- Labor to remove or reinstall, and damage caused by third-party installers
- Products bought from unauthorized sellers, including Amazon
- Clearance items
How to make a ORACLE Lighting warranty claim
- Gather proof of purchase
- Fill out the warranty request form: https://cdn.shopify.com/s/files/1/1766/0599/files/Oracle_Lighting_Warranty_Request_Form_fillable_2021_2.pdf
- Send details plus photos or video if requested
- Get an RMA number before shipping anything back
- If the item turns out not to be defective, you pay the return shipping; international buyers pay all shipping, duties and taxes
ORACLE Lighting contact: Phone: 1 (800) 407-5776 toll free; 1 (504) 835-0055 · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to ORACLE Lighting, and help it along either way.
Shop ORACLE Lighting at NVMOS
ORACLE Lighting 2006-2020 Toyota 4Runner H11 - S3 Pro LED Conversion Kit (Low Beam)
See all ORACLE Lighting products, lead times and FAQs →
Disclaimer: The information on this page describes ORACLE Lighting's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: ORACLE Lighting official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
ORACLE Lighting has designed automotive lighting in Metairie, Louisiana since 1999 and does nothing else. NVMOS carries ORACLE headlights, LED bulb conversions, flush tail lights, ditch light mirrors, pods and ColorSHIFT kits for Jeep, Ford, Toyota, GM, Ram and Nissan owners tired of seeing less than they should.
Based in: Metairie, Louisiana · Designed in: USA (Metairie, Louisiana) · Founded: 1999 · Lead time: Most items 1–2 business days; custom builds weeks
Shop all 922 ORACLE LightingWarrantyAll brands
Warranty terms are set by ORACLE Lighting, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
ORACLE's reverse-light pods for the Jeep Gladiator JT do one job: they widen what you can see behind the truck. The standard reverse lights in ORACLE's 5882-Series Flush Tail Lights throw most of their light straight back, which leaves the rear corners dim. These pods add a second high-output LED to each tail light, sitting farther toward the outside edge of the Gladiator, so the ground beside the bed gets lit as well.
They go into the location where the factory blind-spot sensor would normally sit, so there is no external cube light on the bumper and nothing hanging underneath. The tail lights keep their clean, low-profile look, and you gain light where it helps most: backing up on a dark trail, working around a campsite, lining up a trailer, or pulling into a poorly lit lot. It is also useful for spotting what is visible in the side mirrors but hard to make out at night.
Fitment
Built for Jeep Gladiator JT models that have ORACLE 5882-Series Flush Tail Lights installed and do not have the factory blind-spot monitoring sensors. The pods are compatible with all ORACLE 5882-Series Flush Tail Lights. They are not for trucks that still use the factory sensors in those positions.
What's included
A high-output LED driver plus the passenger-side pods are included. Choose White, or White with an amber backlight.
Install notes
This is not plug-and-play. The pods need a custom 12-volt hardwired installation and do not connect to the factory reverse-light circuit. Prior experience with automotive relays, diodes, fuses and 12V wiring is strongly recommended. If that is outside your comfort zone, plan on a professional installer.
Questions before you order?
Fitment questions are easier to settle before the box ships. Call or text us at (920) 249-7744.
Videos
Complete your Jeep Gladiator build
More parts that fit your Jeep Gladiator and pair well with this one — matched and ready to install.
More for your Jeep Gladiator
Picked from the 1723 parts we carry for the Jeep Gladiator, matched to 2020–2025 model years. Check the years and trim in each title — or call us and we’ll confirm fit.
ORACLE Lighting Auxiliary Light Pods for 5882-Series Flush Tail Lights FAQs
Do these work with any Gladiator tail light?
No. They are made for Gladiator JT trucks running ORACLE 5882-Series Flush Tail Lights, and they use the location normally taken by the factory blind-spot sensor.
Can I use them if my truck has blind-spot monitoring?
The pods are designed for trucks without the factory blind-spot sensors, since they take over those sensor locations.
Are they plug-and-play?
No. They need a custom 12-volt hardwired install and do not tap the factory reverse-light circuit. Experience with relays, diodes, fuses and 12V wiring is strongly recommended.
What colors are available?
White (5882-W-PD) and White with an amber backlight (5882-AW-PD).
What is the warranty?
ORACLE lists a 1-year warranty, and the pods are made in the USA.
Multi-column

Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!

Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.

Contact Us
Have a question? Just send us an e-mail at support@nvmos.com























