Morimoto Jeep JL / JT (2018+) Super7 LED Headlights
Warranty Information
Vendor warranty summary
Morimoto Warranty
At a glance: 5 years on headlight and tail light assemblies; limited lifetime on off-road lighting
This is Morimoto's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Headlight and tail light assemblies (e.g. XB) | 5 years |
| Off-road lighting | Limited lifetime |
| 2Stroke LED bulbs (per product page) | Limited lifetime |
What's covered
- Product failures and defects on headlights and tail lights for 5 years
- Off-road lights for a limited lifetime
- Products must be bought from an authorized Morimoto dealer
What's not covered
- Modifications, alterations, or misuse
- Products bought from unauthorized sellers
- Damage or problems caused by improper installation (document issues before removing lights)
How to make a Morimoto warranty claim
- If something isn't right, take photos or video of the problem before removing the lights
- Contact Morimoto support by phone or email before doing anything else
- Follow their instructions (some items may be field-destroyed with photos; housings usually need to be returned)
Morimoto contact: Phone: 424-239-5142 · Email: morimotohid@morimotohid.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Morimoto, and help it along either way.
Shop Morimoto at NVMOS
Morimoto BigBanger LED Pods: HXB Spot Beam
Morimoto 4Banger LED Pods: HXB Combo Beam
Morimoto 2Banger LED Pods: NCS Combo Beam
See all Morimoto products, lead times and FAQs →
Disclaimer: The information on this page describes Morimoto's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Morimoto official warranty information. Last updated on nvmos.com: October 28, 2026. See our return policy for NVMOS's own terms.
About the brand
Morimoto headlights (often typed Marimoto or Mirimoto) are why most people land here: plug-and-play XB LED headlight assemblies that replace dim factory halogens on Ford, Ram, Chevy/GMC, Toyota, Jeep and Nissan trucks. Morimoto designs, engineers and tests its lights in-house in Atlanta, and NVMOS also carries its LED headlights, tail lights, fog lights, ditch light kits and Banger pods.
Based in: Atlanta, Georgia · Founded: 2008 · Lead time: In-stock items ship in 24–48 hours
Shop all 879 MorimotoWarrantyAll brands
Warranty terms are set by Morimoto, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
Morimoto Super7 LED Headlights — Jeep Wrangler JL / Gladiator JT (2018+)
The Super7 replaces the JL and JT's round headlights with M-LED 2.0 Bi-LED projectors that put out a wide, well-balanced beam measuring 83,000 candela. Each housing draws 29.5W and runs at 6300K.
They connect through the Delphi multi-pin OE connector, so no relay harness is needed, and the modular construction lets the outer trim be paint-matched without compromising the warranty.
| Spec | Detail |
|---|---|
| Optic | M-LED Bi-LED, 29.5W |
| Intensity | 83,000 candela |
| LED | HML-3 7545 with ceramic substrate and ESD protection |
| Colour temperature | 6300K |
| Functions | Low and high beam |
| Input | Delphi multi-pin OE connection |
| Traffic pattern | LHD only |
| Housing | Powder-coated die-cast |
| Lens | UV-treated polycarbonate with Momentive UVHC3000 coating |
| Fitment | Jeep Wrangler JL and Gladiator JT, 2018 and newer |
Will these fit my Jeep?
They fit the Jeep Wrangler JL and Gladiator JT from 2018 onward, and connect through the Delphi multi-pin OE connection.
How much light do they put out?
The M-LED 2.0 Bi-LED projectors produce a wide, well-balanced beam pattern measured at 83,000 candela, running at 6300K.
Is a relay harness required?
No. The installation is plug-and-play through the factory Delphi multi-pin connector, with no relay harness needed.
Can I paint them to match my Jeep?
Yes. The housings are modular specifically so they can be paint-matched without compromising the warranty.
Guides from the NVMOS crew
Your article title
Your article title
Your article title
Featured Collaborators
Multi-column

Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!

Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.

Contact Us
Have a question? Just send us an e-mail at support@nvmos.com

















