Morimoto Sealed6 Bi-LED Headlight
For qualified buyers at checkout
Secure checkoutEncrypted payment
Warranty Information
Vendor warranty summary
Morimoto Warranty
At a glance: 5 years on headlight and tail light assemblies; limited lifetime on off-road lighting
This is Morimoto's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Headlight and tail light assemblies (e.g. XB) | 5 years |
| Off-road lighting | Limited lifetime |
| 2Stroke LED bulbs (per product page) | Limited lifetime |
What's covered
- Product failures and defects on headlights and tail lights for 5 years
- Off-road lights for a limited lifetime
- Products must be bought from an authorized Morimoto dealer
What's not covered
- Modifications, alterations, or misuse
- Products bought from unauthorized sellers
- Damage or problems caused by improper installation (document issues before removing lights)
How to make a Morimoto warranty claim
- If something isn't right, take photos or video of the problem before removing the lights
- Contact Morimoto support by phone or email before doing anything else
- Follow their instructions (some items may be field-destroyed with photos; housings usually need to be returned)
Morimoto contact: Phone: 424-239-5142 · Email: morimotohid@morimotohid.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Morimoto, and help it along either way.
Shop Morimoto at NVMOS
Morimoto BigBanger LED Pods: HXB Spot Beam
Morimoto 4Banger LED Pods: HXB Combo Beam
Morimoto 2Banger LED Pods: NCS Combo Beam
See all Morimoto products, lead times and FAQs →
Disclaimer: The information on this page describes Morimoto's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Morimoto official warranty information. Last updated on nvmos.com: October 28, 2026. See our return policy for NVMOS's own terms.
About the brand
Morimoto headlights are why most people land here: plug-and-play XB LED headlight assemblies that replace dim factory halogens on Ford, Ram, Chevy/GMC, Toyota, Jeep and Nissan trucks. Morimoto designs, engineers and tests its lights in-house in Atlanta, and NVMOS also carries its LED headlights, tail lights, fog lights, ditch light kits and Banger pods.
Based in: Atlanta, Georgia · Founded: 2008 · Lead time: In-stock items ship in 24–48 hours
Shop all 877 MorimotoWarrantyAll brands
Warranty terms are set by Morimoto, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
Morimoto Sealed6 Bi-LED Headlight
The Sealed6 uses a Kuria Optic projector lens to hold a precise beam pattern, backed by 2,400 lumens on low beam and 4,300 on high. High-intensity daytime running lights and parking lights are built into the same housing.
It accepts a wide 9–36V DC input and plugs into an H4 3-pin connector, so it suits 12V trucks and 24V equipment alike.
| Spec | Detail |
|---|---|
| Intensity | 2,400lm (low), 4,300lm (high) |
| Power | 20W (low), 35W (high) |
| Optic | Kuria Optic projector lens |
| Light source | Nichia NCSW170C 5000K (pure white), Philips Luxeon 3535L |
| Input | H4 3-pin; T-taps for DRL |
| Input voltage | 9–36V DC |
| Traffic pattern | LHD only |
| Housing | Aluminium with heat sink |
| Lens | UV-coated polycarbonate |
| Fitment | Universal sealed-beam replacement |
How bright is the Sealed6?
It produces 2,400 lumens on low beam and 4,300 lumens on high beam.
What voltage does it run on?
It accepts 9–36V DC, so it works on both 12V and 24V electrical systems.
Does it include daytime running lights?
Yes. High-intensity daytime running lights and parking lights are built into the housing, and T-taps are used to pick up the DRL circuit.
How does it connect?
Through a plug-and-play H4 3-pin input, so it mates to the existing headlight connector.
Videos
Technical specifications
| Intensity | 2,400lm (Low), 4,300lm (High) |
|---|---|
| Power | 20w (Low), 35w (High) |
| Input | H4, T-Taps for DRL |
| Input Voltage | 9-36V DC |
| Traffic Pattern | LHD Only |
| Material | Aluminum (Housing), Polycarbonate (Lens) |
| Light Source | Nichia NCSW170C 5000K (Pure White), Philips Luxeon 3535L |
Compatibility
| Sealed Beam Standards | H5001, H5006 |
|---|---|
| Input Wiring | H4 3-pin (low/high/ground) |
In the box
| Headlight | 1x Sealed6 Bi-LED Headlight |
|---|---|
| Wiring | H4 Male Input, T-Taps for DRL |
Morimoto Sealed6 Bi-LED Headlight FAQs
How bright is the Morimoto Sealed6?
It produces 2,400 lumens on low beam and 4,300 lumens on high beam.
What voltage does it run on?
It accepts 9 to 36V DC, so it works on both 12V and 24V electrical systems.
Does it include daytime running lights?
Yes. High-intensity DRLs and parking lights are built into the housing, and T-taps pick up the DRL circuit.
How does it connect?
Through an H4 3-pin input that plugs into the existing connector.
What is it made of, and is it for left-hand-drive vehicles?
The housing is aluminium with a heat sink and the lens is UV-coated polycarbonate. The traffic pattern is LHD only.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
