Morimoto Ford F-150 (09-14) OEM HID Conversion Harness
For qualified buyers at checkout
Secure checkoutEncrypted payment
Warranty Information
Vendor warranty summary
Morimoto Warranty
At a glance: 5 years on headlight and tail light assemblies; limited lifetime on off-road lighting
This is Morimoto's warranty, not an NVMOS policy. We've summarized it in plain English to save you a search. The manufacturer's official terms always govern and can change without notice. Last reviewed on nvmos.com: October 4, 2026.
Coverage by product
| Product or component | Coverage |
|---|---|
| Headlight and tail light assemblies (e.g. XB) | 5 years |
| Off-road lighting | Limited lifetime |
| 2Stroke LED bulbs (per product page) | Limited lifetime |
What's covered
- Product failures and defects on headlights and tail lights for 5 years
- Off-road lights for a limited lifetime
- Products must be bought from an authorized Morimoto dealer
What's not covered
- Modifications, alterations, or misuse
- Products bought from unauthorized sellers
- Damage or problems caused by improper installation (document issues before removing lights)
How to make a Morimoto warranty claim
- If something isn't right, take photos or video of the problem before removing the lights
- Contact Morimoto support by phone or email before doing anything else
- Follow their instructions (some items may be field-destroyed with photos; housings usually need to be returned)
Morimoto contact: Phone: 424-239-5142 · Email: morimotohid@morimotohid.com · Claim page / support
Bought it from NVMOS? Start with us.
Have your order number and a few photos of the issue ready, then call real humans at (920) 249-7744 or send us a message. We'll tell you whether the claim goes through us or straight to Morimoto, and help it along either way.
Shop Morimoto at NVMOS
Morimoto Ford Super Duty (17-22) XB Evo+ LED Fog Lights
Morimoto Ford F-150 (18-20) XB Evo+ LED Fog Lights
Morimoto Ford F-150 (15-17) XB Evo+ LED Fog Lights
See all Morimoto products, lead times and FAQs →
Disclaimer: The information on this page describes Morimoto's own warranty policy. It is not a warranty offered by NVMOS (No Visible Means of Support LLC). Manufacturers update their terms at any time; we review these pages periodically, but the manufacturer's current official policy is the one that applies to your claim. Source: Morimoto official warranty information. Last updated on nvmos.com: October 4, 2026. See our return policy for NVMOS's own terms.
About the brand
Morimoto is an Atlanta lighting company that designs, engineers and tests its lights in-house. NVMOS carries Morimoto XB LED headlights and tail lights, fog lights, ditch light kits, Banger pods and more for Ford, Ram, Chevy/GMC, Toyota, Jeep and Nissan trucks. For owners tired of dim factory halogens.
Based in: Atlanta, Georgia · Founded: 2008 · Lead time: In-stock items ship in 24–48 hours
Shop all 621 MorimotoWarrantyAll brands
Warranty terms are set by Morimoto, not NVMOS, and can change. Bought from us? Call (920) 249-7744 and we'll handle the claim with the brand.
Morimoto OEM HID Conversion Harness (H110) — Ford F-150
The H110 is the wiring that makes an OEM Bi-xenon headlight swap work on an F-150 that left the factory with H13 halogen lamps. It is plug-and-play — no cutting, no splicing into the truck's harness.
A MotoControl 8-pin relay with a smart capacitor handles the switching so your factory cabin controls still operate the lights, with smooth transitions between modes. Morimoto specifies it for 2013-2014 F-150s.
| Spec | Detail |
|---|---|
| Part number | H110 |
| Function | Integrates OEM Bi-xenon headlights onto trucks with standard H13 halogen headlamps |
| Relay | MotoControl 8-pin relay with smart capacitor for smooth mode transitions |
| Sleeving | Abrasion-resistant Techflex mesh |
| Relay housing | Anodized aluminum |
| Install | Plug-and-play; no cutting or splicing required; clearly labeled |
| Fitment | Ford F-150, 2013–2014 per Morimoto's application listing |
Will this fit my F-150?
Morimoto specifies the H110 harness for 2013-2014 Ford F-150s that came with standard H13 halogen headlamps. Confirm your truck's factory headlight type before ordering.
What does the harness actually do?
It lets you run OEM Bi-xenon headlights on a truck that was built with H13 halogen headlamps, integrating them without cutting or splicing.
Do I keep my factory headlight switch?
Yes. The MotoControl 8-pin relay with its smart capacitor lets you control the HID lights using the original cabin controls, with smooth transitions between lighting modes.
How is it built?
The harness uses abrasion-resistant Techflex mesh sleeving and a sleek anodized aluminum relay construction.
Why it works
No cutting or splicing
Adds OEM bi-xenon headlights to the F-150 without cutting or splicing.
Uses original cabin controls
The MotoControl Relay lets the original cabin controls run the new HID lights.
Smart capacitor
A smart capacitor keeps the lights on through lighting changes.
Clearly labeled harness
Clear labeling and no cutting make it usable on a range of vehicles.
Techflex mesh, aluminum relay
Techflex mesh and an aluminum relay shell are built to last.
Videos
Technical specifications
| Input | 1x H13 Male |
|---|---|
| Output | 2x Proprietary Ford Multi-Pin |
| 12V Power | 1x Nickel-Plated Ring Terminal |
| Fuse | Inline 25A |
Compatibility
| Ford F-150 | 2009-2014 (w/o OEM HIDs) |
|---|---|
| Housings | 13-14 F-150 OEM HIDs |
| BALLASTS | OEM Ford Green Label D1S/D3S Only |
| NOTICE | Orange Label D1S ballasts require snipping the green wire on the ballast input (inside the headlight) |
In the box
| Harness | 1x F-150 OEM HID Conversion Harnesses |
|---|---|
| Note | One harness controls both headlights |
Frequently bought together
Complete your F-150 build
More parts that fit your F-150 and pair well with this one — matched and ready to install.
$122.00
$394.00
$424.92
$1,190.00
$765.00
More for your Ford F-150
Picked from the 716 parts we carry for the Ford F-150, matched to 2009–2014 model years. Check the years and trim in each title — or call us and we’ll confirm fit.
Morimoto Ford F-150 (09-14) OEM HID Conversion Harness FAQs
Will this harness fit my F-150?
Morimoto specifies the H110 for 2013-2014 Ford F-150s that came with standard H13 halogen headlamps. Confirm your truck's factory headlight type before ordering.
What does the harness do?
It lets you run OEM Bi-xenon headlights on a truck built with H13 halogen headlamps. It is plug-and-play with no cutting or splicing.
Will my factory headlight controls still work?
Yes. A MotoControl 8-pin relay with a smart capacitor keeps the factory cabin controls working with smooth transitions between modes.
How is it built?
It uses abrasion-resistant Techflex mesh sleeving and an anodized aluminum relay housing. The harness is clearly labeled.
Multi-column
Join Our Community
For all things NVMOS, check us out on Instagram and Facebook!
Financing Available
Pay over time with Affirm or PayPal Credit at checkout, for qualified buyers.
Contact Us
Have a question? Just send us an e-mail at support@nvmos.com
